- FreeSWITCH-dev - FreeSWITCH Mailing Lists

Long Duration Call run completed
by Ken Rice 06 Oct '07

06 Oct '07

Just FYI and a big thanks to Anthm and his team I have just completed a mid duration test run with FreeSwitch. Using sipp and a single core Xeon 3.06ghz machine with 1 Gig of ram, FreeSwitch ran for 27 hours under a call load of 60calls per second, with each call lasting 5 seconds each. Calls were ran in ³no media mode² passing the calls to a second FreeSwitch box on identical hardware which Answered the Calls and played back media until sipp acting as a UAC terminated the call. Total Calls Competed: 6,008,187 Total FreeSwitch Session on the relay box: 12,019,199 Average Concurrent Calls: 327 Total Time Ran 27hours My intent was to leave the test running for 48 hours and try to reach the 10million calls mark, however, I screwed up hit the wrong key (^\) and forced a segfault into sipp pulling an early abort on the test. Currently I am working out a test plan to determine several performance metrics independent of Tony and his team. If anyone has any suggestions on performace metrics and test tools you would like to see here drop me a note and let me know. K

1 0

Hardware Needed for testing.
by Brian West 05 Oct '07

05 Oct '07

We are in need of three Polycom IP 650's for Wide band interop and conference testing in wideband. If anyone wants to figure a way for us to get our paws on these please email me off list. Thanks, Brian West

1 0

mod_sndfile build error on Debian x86_64
by Alfred E. Heggestad 14 Sep '07

14 Sep '07

Hi I got a build error in mod_sndfile when building on a Debian x86_64 system. URL: http://svn.freeswitch.org/svn/freeswitch/trunk Repository Root: http://svn.freeswitch.org/svn Repository UUID: d0543943-73ff-0310-b7d9-9358b9ac24b2 Revision: 5706 root@h1:~/svn/freeswitch# uname -a Linux h1 2.6.16.29-xen #3 SMP Sun Oct 15 13:15:34 BST 2006 x86_64 GNU/Linux root@h1:~/svn/freeswitch# gcc -v Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release x86_64-linux-gnu Thread model: posix gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21) making all mod_sndfile Creating mod_sndfile.so... /usr/bin/ld: ../../../../libs/libsndfile/src/.libs/libsndfile.a(g721.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../../../../libs/libsndfile/src/.libs/libsndfile.a: could not read symbols: Bad value collect2: ld returned 1 exit status gcc -I../../../../libs/libsndfile/src -I/root/svn/freeswitch/src/include -I/root/svn/freeswitch/libs/libteletone/src -fPIC -Werror -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -o .libs/mod_sndfile.so -shared -Wl,-x mod_sndfile.o -o .libs/mod_sndfile.so -L/usr/local/lib /root/svn/freeswitch/.libs/libfreeswitch.so ../../../../libs/libsndfile/src/.libs/libsndfile.a -lm -Wl,--rpath -Wl,/usr/local/freeswitch/lib make[5]: *** [mod_sndfile.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_sndfile-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 any ideas? /alfred

1 0

Astricon Meetup
by Brian West 28 Aug '07

28 Aug '07

Everyone, I will be attending Astricon in Phoenix and would like to have a little get together to discuss Open Source Telephony and the challenges we as developers and system integrators face. Exchange ideas and go over some use cases and see how we can all work together to improve our understanding of the dynamics of how everything works together. * Scaleability * Reusability of code * Standards (VoiceXML, MRCP and more) If anyone is interested please email me off list and we'll plan on having a meeting of minds. Thanks, Brian West FreeSWITCH.org

1 0

mod_openzap using Digium TDM400P crashes
by Craig Kowald 16 Aug '07

16 Aug '07

I download mod_openzap on Aug 14 2007 and have been trying to use it with a Digium TDM400P card. Sadly it has crashed on me in two places :(. I was going to raise a bug in Jira, but this module is not listed as a component under Project: endpoint modules, so I am just mentioning it here instead :). The first crash I believe is due to the passing of an address to a pointer instead of just the pointer. mod_openzap.c:804 has the call: if (!(session = switch_core_session_request(&channel_endpoint_interface, NULL))) { this should be: if (!(session = switch_core_session_request(channel_endpoint_interface, NULL))) { The second crash I do not fully understand :(. When I try to place a call using an analog phone connected to the TDM400P, freeswitch crashes after the first ring. I traced the crash to switch_core_io.c:152 due to (*frame)->codec being NULL. This should have been set via a preceding call which resolved to the function channel_read_frame in mod_openzap.c. Sadly this call returns at mod_openzap.c:464 without (*frame)->codec being set :(. This is because tech_pvt->cng_frame never has a value for codec. I do not understand anywhere near enough to know what the correct fix is for this. As a quick hack, I set a value for this at line 228 with: tech_pvt->cng_frame.codec = &tech_pvt->read_codec; but I am not sure this is the right solution :/. These two changes have allowed me to progress to the next stage of my testing, but I would like to know if they are correct. Regards, Craig.

2 2

Re: [Freeswitch-dev] Porting to Blackfin
by Shidan 14 Aug '07

14 Aug '07

So far srtp and a few smaller packages. We are working on sophia now. What have other people done so far with Freeswitch on the blackfin? On 6/5/07, Wojciech Tryc <wojtek(a)voipman.org> wrote: > Hi, > How far did you get? I am the primary developer on astfin which is basically > asterisk for blackfin. > We are basically supporting David's ip04, as well as blackfin one, stamp and > our own baby PR1. > > Cheers, > Wojtek > ----- Original Message ----- > From: "Shidan" <shidan(a)gmail.com> > To: <freeswitch-dev(a)lists.freeswitch.org>; > <freeswitch-users(a)lists.freeswitch.org> > Sent: Tuesday, June 05, 2007 11:19 AM > Subject: [Freeswitch-dev] Porting to Blackfin > > > > Hi list, > > > > If any of you are interested in porting Freeswitch to > > Blackfin/uClinux. then please contact me. We have started actively > > working on this project and would like to set up a conference call to > > talk about possible collaboration with others and a roadmap. > > > > Regards, > > Shidan Gouran > > Jazinga Inc. > > > > _______________________________________________ > > Freeswitch-dev mailing list > > Freeswitch-dev(a)lists.freeswitch.org > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev > > http://www.freeswitch.org > > > > >

3 4

NI-2 pri support for openzap.
by Michael Jerris 06 Aug '07

06 Aug '07

I have had several people state interest in adding NI-2 national pri support to the pri stack in openzap. Can those interested in sponsoring such work please contact me privately. Thanks Mike

1 0

Using FreeSwitch with .NET
by Bharath B. Reddy Bynagari 02 Aug '07

02 Aug '07

1 0

Re: [Freeswitch-dev] mod_radiusclient
by Anthony Minessale 26 Jul '07

26 Jul '07

if you want it to handle sip registrations the correct way is to connect to the directory interface with the xml hook (see mod_xml_curl) This allows a module to request that it has the first chance to lookup any xml requests ahead of actually looking in the file. If your module was registered and binded to the "directory" section, then when the sip asked for the directory data from xml you can actually do the radius request and populate the reply with our xml api and return it in place of the actual contents of the real xml file. This already can be done with mod_xml_curl which is similar but uses a http connection instead of radius to do the proxy lookups. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Tuyan Özipek <tuyanozipek(a)gmail.com> To: freeswitch-dev(a)lists.freeswitch.org Sent: Friday, July 20, 2007 4:20:30 AM Subject: [Freeswitch-dev] mod_radiusclient Hi all, Here is a small piece of log from the radius auth module that i wrote. Just by curiosity, i patched mod_sofia to handle incoming registration requests with radius.I used freeradius-client library like the mod_radius_cdr module.Almost all the client configuration is in radiusclient.conf.xml. I hope i am not duplicating someone else's work.I am planning to release it after adding a few more features..If someone has a better idea, some thoughts about a cool feature or anything, i will be happy to hear that.. Cheers /tuyan freeswitch@gitt> 2007-07-20 04:46:32 [DEBUG] sofia_reg.c:430 sofia_reg_handle_register() Requesting Registration from: [tuyan(a)10.0.0.1] 2007-07-20 04:46:32 [DEBUG] mod_fradiusclient.c:216 radius_accrequest_digest_function() Sending Digest Request 2007-07-20 04:46:32 [DEBUG] sofia_reg.c:465 sofia_reg_handle_register() Register: From: [tuyan(a)10.0.0.1] Contact: [tuyan <sip:tuyan@10.0.0.2:5060>] Expires: [89] and from freeradius rad_recv: Access-Request packet from host 127.0.0.1 port 33676, id=81, length=200 User-Name = "tuyan" Digest-Response = "dded20ab037e670932e15104cd91ec98" Digest-Attributes = 0x010a31302e302e302e31 Digest-Attributes = 0x022635636636643966652d333661312d313164632d626330652d393764356565303135626466 Digest-Attributes = 0x030a5245474953544552 Digest-Attributes = 0x040e7369703a31302e302e302e31 Digest-Attributes = 0x06054d4435 Digest-Attributes = 0x0a07747579616e Digest-Attributes = 0x050661757468 Digest-Attributes = 0x080962353632663666 Digest-Attributes = 0x090a3030303030303031 NAS-Port = 0 NAS-IP-Address = 127.0.0.1 rlm_digest: Converting Digest-Attributes to something sane... Digest-Realm = "10.0.0.1" Digest-Nonce = "5cf6d9fe-36a1-11dc-bc0e-97d5ee015bdf" Digest-Method = "REGISTER" Digest-URI = "sip:10.0.0.1" Digest-Algorithm = "MD5" Digest-User-Name = "tuyan" Digest-QOP = "auth" Digest-CNonce = "b562f6f" Digest-Nonce-Count = "00000001" A1 = tuyan:10.0.0.1:tuyan A2 = REGISTER:sip:10.0.0.1 H(A1) = 7eeee22e4515abd8631075ce5f548eb9 H(A2) = bde0744e720053a66f505221cfc7202f KD = 7eeee22e4515abd8631075ce5f548eb9:5cf6d9fe-36a1-11dc-bc0e-97d5ee015bdf:00000001:b562f6f:auth:bde0744e720053a66f505221cfc7202f EXPECTED dded20ab037e670932e15104cd91ec98 RECEIVED dded20ab037e670932e15104cd91ec98 ++[digest] returns ok Sending Access-Accept of id 81 to 127.0.0.1 port 33676 And the configuration file <configuration name="radiusclient.conf" description="Radius Client Configuration"> <settings> <param name="auth_order" value="radius"/> <param name="login_tries" value="3"/> <param name="dictionary" value="/opt/radiusclient/etc/dictionary.tuyan"/> <param name="seqfile" value="/var/run/radius.seq"/> <param name="authserver" value="127.0.0.1:1812:testing123"/> <param name="acctserver" value="localhost:1813:testing1234"/>   <param name="radius_timeout" value="2"/> <param name="radius_retries" value="3"/> <param name="bindaddr" value="127.0.0.1"/> </settings> </configuration> _______________________________________________ Freeswitch-dev mailing list Freeswitch-dev(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org ____________________________________________________________________________________ Shape Yahoo! in your own image. Join our Network Research Panel today! http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7

2 1

Re: [Freeswitch-dev] towards making fh->silence_hits a representation in ms internally w/o changing interface
by Anthony Minessale 25 Jul '07

25 Jul '07

Can you put that patch on jira so we can document it and get it in? Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: David Nicol <davidnicol(a)gmail.com> To: freeswitch-dev(a)lists.freeswitch.org; Luke-Jr <luke(a)openmethods.com> Sent: Wednesday, July 25, 2007 12:38:15 PM Subject: Re: [Freeswitch-dev] towards making fh->silence_hits a representation in ms internally w/o changing interface instead of the comment concerning the legacy situation of one argument with PATHNAME\+LIMIT in it, here's support for that: }else{ l = strchr(argv[0],'+'); if(l){ *l++ = '\0'; if ((limit=atoi(l)) < 0) limit = 0; } } _______________________________________________ Freeswitch-dev mailing list Freeswitch-dev(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org ____________________________________________________________________________________ Got a little couch potato? Check out fun summer activities for kids. http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&…

2 1