September 2014 - freeswitch-dev@lists.freeswitch.org

[Freeswitch-dev] mod_conference remote recording
by miguelo 05 Nov '14

05 Nov '14

Hello, I try to setup recording with mod_conference and mod_oreka. I know it is possible to record to file with mod_conference, but i want to record a conference using mod_oreka. I tried dialing out to the loopback interface and answering that call in the dialplan to start recording but the recording will stop when the end of the extension is reached. I also tried to change the c code to start another session and execute the application oreka_record on that session, but i couldn't figure out how to correctly setup media on that session. Does anyone know s any module i could use as reference or another method to acomplish this. Thanks, Miguelo

3 2

[Freeswitch-dev] Missing Header in SIP Message
by Ronnie Beck 06 Oct '14

06 Oct '14

Hello Freeswitch Gurus! I have a simple problem I am hoping someone might be able to help me with. I want to configure a SNOM phone automagically using SIP messages. The process is described here: http://wiki.snom.com/Category:HowTo:XML_SIP_Settings I have created a Freeswitch module which sends the appropriate SIP message to the phone but I have hit a small snag. In order for this to work, two headers must be set in the SIP message else the SNOM will ignore the request. Those are: Event: snom-settings Content-Type: application/xml I have code which should do that but when I do a packet capture, I can see that the "Event" header is not in the SIP message that is sent. The code I am using is listed below. Is there something obvious that I am doing wrong? According to the output I get in the Freeswitch console from my module, the "Event" header is successfully added to the event, however it isn't present in the SIP message. Many thanks in advance, Ronnie Code: |//Send the configuration || ||||*if*||(switch_event_create(&event, ||/SWITCH_EVENT_SEND_MESSAGE/||) == ||/SWITCH_STATUS_SUCCESS/||)|||||| ||{|||||||| ||||*switch_event_add_header_string*||(event, ||/SWITCH_STACK_BOTTOM/||, ||"user"||,user);|||||| ||||*switch_event_add_header_string*||(event, ||/SWITCH_STACK_BOTTOM/||, ||"host"||,||"10.0.0.23"||);|||||| ||||*switch_event_add_header_string*||(event, ||/SWITCH_STACK_BOTTOM/||, ||"profile"||,||"internal"||);|||||| ||||*switch_event_add_header_string*||(event, ||/SWITCH_STACK_BOTTOM/||, ||"Subject"||,||"buttons"||);|||||| || returnValue = ||*switch_event_add_header_string*||(event, ||/SWITCH_STACK_BOTTOM/||, ||"Event"||,||"||_snom_||-settings"||);|||||| ||||*switch_event_add_header_string*||(event, ||/SWITCH_STACK_BOTTOM/||, ||"Content-Type"||, ||"application/||_xml_||"||);|||||| ||||* switch_event_add_body*||(event, ||"<settings>"|||||| |||| "<phone-settings>"|| |||||| . . <snip> . . || "</settings>"||);|| |||| switch_event_fire(&event);|| |||| |||| ||||* if*||( returnValue != ||/SWITCH_STATUS_SUCCESS/||)|||||| ||||* switch_log_printf*||( SWITCH_CHANNEL_LOG, ||/SWITCH_LOG_INFO/||, ||"(%s) Failed to set Event header for user %s.\n"||, __FUNCTION__, user );|||||| ||||* else*|||||| ||||* switch_log_printf*||( SWITCH_CHANNEL_LOG, ||/SWITCH_LOG_INFO/||, ||"(%s) Succeeded to set Event header for user %s.\n"||, __FUNCTION__, user );| }

2 1

[Freeswitch-dev] Docs and BugHunt Conf Call Time Adjustment
by Ken Rice 30 Sep '14

30 Sep '14

Hey guys quick note on this weeks conference calls! The Docs and BugHunts will be at 11AM CDT (that¹s 1600 GMT) Join us on https://conference.freeswitch.org/ and click the Call 888 button! This week on the Docs Call, Book and Docs Review/Update Today Tuesday Sep 30th! The BugHunt on Thursday will be at 11AM CDT/1600GMT also! Join us then! -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH

1 0

[Freeswitch-dev] FreeSWITCH 1.4.9 Released!
by Ken Rice 29 Sep '14

29 Sep '14

Hey FreeSWITCHers! The FreeSWITCH Dev Team is happy to announce FreeSWITCH 1.4.9 has been released. This release is a bug fix release. Source Tarball is available at http://files.freeswitch.org/ and packages are available via the Yum and Debian repos. K -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH

1 0

[Freeswitch-dev] FreeSWITCH Friday FreeForAll Reminder!
by Ken Rice 26 Sep '14

26 Sep '14

FreeSWITCHers, Do not forget to join us at 2PM CST for the FreeSWITCH Friday FreeFor All Visit http://ift.tt/1n3h0Pf and Click Call 888 with your WebRTC enabled Browser and headset, Call sip:888@conference.freeswitch.org or see http://ift.tt/1prwIZL for access info! -- Ken FreeSWITCH.org ClueCon.com OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH @ClueCon

1 0

[Freeswitch-dev] FS-6849: mod_python error everytime session is invoked for the first time right after a freeswitch start
by Nuno Reis 25 Sep '14

25 Sep '14

Using gdb I've figured out that in mod_python.c:281: ... result = PyEval_CallObjectWithKeywords(function, arg, (PyObject *) NULL); Py_DECREF(function); ... variable result is always null when a python script trying to use the session run the first time right after freeswitch startup. That will make it enter the else logic in line 291 in the same file ending with a crash. I'll still have to drill more to find out why this is happening now. Anyone has a clue on what's going on? BR, -- *Nuno Miguel Reis* | *Unified Communication** Systems* M. +351 913907481 | nreis(a)wavecom.pt WAVECOM-Soluções Rádio, S.A. Cacia Park | Rua do Progresso, Lote 15 3800-639 AVEIRO | Portugal T. +351 309 700 225 | F. +351 234 919 191 *GPS <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* [image: Description: Description: WavecomSignature] <http://www.wavecom.pt/pt/wavecom/premios.php> [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php> On Tue, Sep 23, 2014 at 3:53 AM, Nuno Reis <nreis(a)wavecom.pt> wrote: > This is the output after calling the script right after start: > > 2014-09-23 03:49:45.801129 [NOTICE] mod_python.c:212 Invoking py module: > teste > 2014-09-23 03:49:45.801129 [NOTICE] switch_cpp.cpp:1328 Testing123... > 2014-09-23 03:49:45.801129 [NOTICE] switch_cpp.cpp:1328 Dumping current > CDR INFO > 2014-09-23 03:49:45.801129 [ERR] mod_python.c:293 Error calling python > script > 2014-09-23 03:49:45.801129 [ERR] mod_python.c:164 Python Error by calling > script "teste": <type 'exceptions.AttributeError'> > Message: 'PySwigObject' object has no attribute 'getXMLCDR' > Exception: None > > Traceback (most recent call last) > File: "/opt/freeswitch/scripts/teste.py", line 12, in handler > > All the following script calls work just fine. > > *Note:* If you want to test the code snippet i've added before don't > forget to add: > > import freeswitch > > Looking forward to hear from you. > > Best Regards, > > -- > > *Nuno Miguel Reis* | *Unified Communication** Systems* > M. +351 913907481 | nreis(a)wavecom.pt > WAVECOM-Soluções Rádio, S.A. > Cacia Park | Rua do Progresso, Lote 15 > 3800-639 AVEIRO | Portugal > T. +351 309 700 225 | F. +351 234 919 191 > *GPS > <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> > | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* > > [image: Description: Description: WavecomSignature] > <http://www.wavecom.pt/pt/wavecom/premios.php> > > [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php> > > > > On Tue, Sep 23, 2014 at 3:44 AM, Nuno Reis <nreis(a)wavecom.pt> wrote: > >> Hi guys. >> >> I've reported this before and i can tell that it is still happening in >> the latest v1.4. >> >> How reproduce: >> >> >> 1. just create a dialplan that calls a python script >> 2. dial that dialplan entry >> >> >> Example code (works with anything that invokes *session*): >> >> #!/usr/bin/env python >> # -*- coding: utf-8 -*- >> >> from __future__ import absolute_import >> # http://docs.python.org/whatsnew/pep-328.html >> >> def handler(session, args): >> freeswitch.consoleLog("notice", "Testing123...") >> freeswitch.consoleLog("notice", "Dumping current CDR INFO") >> freeswitch.consoleLog("info", str(session.getXMLCDR())) >> freeswitch.consoleLog("notice", "The END!") >> >> >> mod_pyhton crashes everytime the script is called right after a >> freeswitch start (the very first time session is invoked inside a >> mod_python python script). >> After the first time (error), everything starts to work just fine. >> This doesn't happen in e6b8b3e4f2deac73547bc9b9a2cb3e1d3147d101 from >> v1.2.stable >> >> Should i open a jira on this? >> >> -- >> >> *Nuno Miguel Reis* | *Unified Communication** Systems* >> M. +351 913907481 | nreis(a)wavecom.pt >> WAVECOM-Soluções Rádio, S.A. >> Cacia Park | Rua do Progresso, Lote 15 >> 3800-639 AVEIRO | Portugal >> T. +351 309 700 225 | F. +351 234 919 191 >> *GPS >> <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> >> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* >> >> [image: Description: Description: WavecomSignature] >> <http://www.wavecom.pt/pt/wavecom/premios.php> >> >> [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php> >> >> >> >

1 0

[Freeswitch-dev] ClueCon Weekly! Sep 24th 1PM Eastern! Darren Schreiber of 2600hz!
by Ken Rice 24 Sep '14

24 Sep '14

Greetings! Don¹t forget to join us today at 1PM Eastern (that¹s 10AM Pacific) for ClueCon Weekly! This week we¹ll have Darren Schreiber of 2600hz, co-author of the FreeSWITCH Cookbook, and FreeSWITCH Trainer! This week he¹ll be talking 2600hz and where they are headed plus an announcement! Join us on https://conference.freeswitch.org/ with your headset and click the Call 888 button! And Don¹t forget Thursdays @ 2PM Central (Noon Pacific) is the Weekly FreeSWITCH BugHunt! Join us to get your Jira Tickets, Pull Requests and Patches reviewed! K -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH

1 0

[Freeswitch-dev] Patch Submissions
by Arthur Taylor 23 Sep '14

23 Sep '14

Hello I guess this is my introduction to this list. >From my work I have patches for FreeSwitch which I would like to contribute. My question is how should I submit them? What sort of patch review do I need to undertake? Where do I send the patches? Is a `git send-patch` to this list for a multipart patch set okay? Specifically I have patches for the task scheduler to improve its reliability. -Art -- Arthur Taylor art(a)ified.ca

3 2

[Freeswitch-dev] Garbage characters on fs_cli when doing reloadxml
by Michael Collins 23 Sep '14

23 Sep '14

Hey guys, I have a few installs where you see garbage characters at fs_cli when doing a reloadxml or F6. It appears to be cosmetic. I was curious if anyone else sees that? -MC

3 4

[Freeswitch-dev] mod_python error everytime session is invoked for the first time right after a freeswitch start
by Nuno Reis 23 Sep '14

23 Sep '14

Hi guys. I've reported this before and i can tell that it is still happening in the latest v1.4. How reproduce: 1. just create a dialplan that calls a python script 2. dial that dialplan entry Example code (works with anything that invokes *session*): #!/usr/bin/env python # -*- coding: utf-8 -*- from __future__ import absolute_import # http://docs.python.org/whatsnew/pep-328.html def handler(session, args): freeswitch.consoleLog("notice", "Testing123...") freeswitch.consoleLog("notice", "Dumping current CDR INFO") freeswitch.consoleLog("info", str(session.getXMLCDR())) freeswitch.consoleLog("notice", "The END!") mod_pyhton crashes everytime the script is called right after a freeswitch start (the very first time session is invoked inside a mod_python python script). After the first time (error), everything starts to work just fine. This doesn't happen in e6b8b3e4f2deac73547bc9b9a2cb3e1d3147d101 from v1.2.stable Should i open a jira on this? -- *Nuno Miguel Reis* | *Unified Communication** Systems* M. +351 913907481 | nreis(a)wavecom.pt WAVECOM-Soluções Rádio, S.A. Cacia Park | Rua do Progresso, Lote 15 3800-639 AVEIRO | Portugal T. +351 309 700 225 | F. +351 234 919 191 *GPS <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* [image: Description: Description: WavecomSignature] <http://www.wavecom.pt/pt/wavecom/premios.php> [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php>

1 1