- FreeSWITCH-dev - FreeSWITCH Mailing Lists

Re: [Freeswitch-dev] Issue with Call Hold @ Freeswitch FXS....
by Anthony Minessale 08 Jan '08

08 Jan '08

by the way thanks, I see you actually did file a bug so nevermind that req. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Irshad Ahamed <irshad.fswitch(a)gmail.com> To: freeswitch-dev(a)lists.freeswitch.org; freeswitch-users(a)lists.freeswitch.org Sent: Tuesday, January 8, 2008 11:53:35 AM Subject: Re: [Freeswitch-dev] Issue with Call Hold @ Freeswitch FXS.... Your interpretation is right. This is what I have observed while testing here. To be more precise, when you hangup the FXS completely, the first call doesnt get disconnected. BR, Irshad. On Jan 8, 2008 7:38 PM, Anthony Minessale <anthmct(a)yahoo.com> wrote: Can you clarify more so I am sure I understand? You use fxs to call an extension that leads to a sip phone. You press FLASH on fxs to get a dialtone and make another call. You hangup the fxs completely (ONHOOK) and one of the 2 calls do not end? The current intended behavior is when you FLASH fxs you can make another call and switch back and forth with subsequent FLASH. But if the fxs is ONHOOK all the calls should end. We still need some more code to do other behaviors from fxs like transfer etc. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: " freeswitch-dev(a)lists.freeswitch.org" <freeswitch-dev(a)lists.freeswitch.org> To: freeswitch-dev(a)lists.freeswitch.org; freeswitch-users(a)lists.freeswitch.org Sent: Monday, January 7, 2008 11:36:09 PM Subject: [Freeswitch-dev] Issue with Call Hold @ Freeswitch FXS.... Set-up is as below: 1. Freeswitch is configured as UA with Asterisk TDM card (Openzap) 1 FXS + 1 FXO registered with SIPX. 2. SNOM300 registered with SIPX SNOM300: Kernel Version:snom300 linux 3.25 Application-Version:snom300-SIP 6.5.2 Rootfs-Version:snom300 jffs2 v3.36 Firmware-URL: Production Information:Mac:00041325329C;Version:Standard;Hardware:snom300 (MB V3.2_A11);Date:26/06/06;Copyright(C) snom technology AG 3. GRANDSTREAM registered with SIPX. GRANDSTREAM: Product Model: GXP2000 Software : Program-- 1.1.4.18 Version : Bootloader-- 1.1.4.6 Procedure followed: 1. Make a successful call from Freeswitch FXS to SNOM300. Put the call on hold @ Freeswitch FXS and make new call to GRANDSTREAM. 2. Accept the call @ GRANDSTREAM and disconnect the connected call @ FREESWITCH FXS. 3. The second call with GRANDSTREAM is being disconnected but the first call with SNOM300 is still alive at SNOM300. NOTE: Please find the Freeswitch logs and Ethereal caps @ http://jira.freeswitch.org/browse/MODENDP-74 BR, Irshad. Looking for last minute shopping deals? Find them fast with Yahoo! Search. _______________________________________________ Freeswitch-dev mailing list Freeswitch-dev(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

1 0

Re: [Freeswitch-dev] Issue with Call Hold @ Freeswitch FXS....
by Anthony Minessale 08 Jan '08

08 Jan '08

Can you clarify more so I am sure I understand? You use fxs to call an extension that leads to a sip phone. You press FLASH on fxs to get a dialtone and make another call. You hangup the fxs completely (ONHOOK) and one of the 2 calls do not end? The current intended behavior is when you FLASH fxs you can make another call and switch back and forth with subsequent FLASH. But if the fxs is ONHOOK all the calls should end. We still need some more code to do other behaviors from fxs like transfer etc. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: "freeswitch-dev(a)lists.freeswitch.org" <freeswitch-dev(a)lists.freeswitch.org> To: freeswitch-dev(a)lists.freeswitch.org; freeswitch-users(a)lists.freeswitch.org Sent: Monday, January 7, 2008 11:36:09 PM Subject: [Freeswitch-dev] Issue with Call Hold @ Freeswitch FXS.... Set-up is as below: 1. Freeswitch is configured as UA with Asterisk TDM card (Openzap) 1 FXS + 1 FXO registered with SIPX. 2. SNOM300 registered with SIPX SNOM300: Kernel Version:snom300 linux 3.25 Application-Version:snom300-SIP 6.5.2 Rootfs-Version:snom300 jffs2 v3.36 Firmware-URL: Production Information:Mac:00041325329C;Version:Standard;Hardware:snom300 (MB V3.2_A11);Date:26/06/06;Copyright(C) snom technology AG 3. GRANDSTREAM registered with SIPX. GRANDSTREAM: Product Model: GXP2000 Software : Program-- 1.1.4.18 Version : Bootloader-- 1.1.4.6 Procedure followed: 1. Make a successful call from Freeswitch FXS to SNOM300. Put the call on hold @ Freeswitch FXS and make new call to GRANDSTREAM. 2. Accept the call @ GRANDSTREAM and disconnect the connected call @ FREESWITCH FXS. 3. The second call with GRANDSTREAM is being disconnected but the first call with SNOM300 is still alive at SNOM300. NOTE: Please find the Freeswitch logs and Ethereal caps @ http://jira.freeswitch.org/browse/MODENDP-74 BR, Irshad. ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

3 2

Issue with Call Hold @ Freeswitch FXS....
by freeswitch-dev＠lists.freeswitch.org 08 Jan '08

08 Jan '08

Set-up is as below: 1. Freeswitch is configured as UA with Asterisk TDM card (Openzap) 1 FXS + 1 FXO registered with SIPX. 2. SNOM300 registered with SIPX SNOM300: Kernel Version:snom300 linux 3.25 Application-Version:snom300-SIP 6.5.2 Rootfs-Version:snom300 jffs2 v3.36 Firmware-URL: Production Information:Mac:00041325329C;Version:Standard;Hardware:snom300 (MB V3.2_A11);Date:26/06/06;Copyright(C) snom technology AG 3. GRANDSTREAM registered with SIPX. GRANDSTREAM: Product Model: GXP2000 Software : Program-- 1.1.4.18 Version : Bootloader-- 1.1.4.6 Procedure followed: 1. Make a successful call from Freeswitch FXS to SNOM300. Put the call on hold @ Freeswitch FXS and make new call to GRANDSTREAM. 2. Accept the call @ GRANDSTREAM and disconnect the connected call @ FREESWITCH FXS. 3. The second call with GRANDSTREAM is being disconnected but the first call with SNOM300 is still alive at SNOM300. NOTE: Please find the Freeswitch logs and Ethereal caps @ http://jira.freeswitch.org/browse/MODENDP-74 BR, Irshad.

1 0

Crash while incoming Call with improper dialplan/default.xml
by Irshad Ahamed 07 Jan '08

07 Jan '08

Hi, Crash has been found with Freeswitch when we configure the dialplan/default.xml as follows. <extension name="incoming"> <condition field="destination_number" expression="^(7001)$"> <action application="bridge" data="openzap"/> </condition> </extension> Procedures followed: 1. Configure for incoming call as above in your dialplan/default.xml 2. Run Freeswitch and register FXS with sipx. 3. After successful registration, make an inward call from other registered endpoint to Freeswitch FXS. It will result in a crash. BR, Irshad. On Jan 6, 2008 2:05 AM, Brian West <brian.west(a)mac.com> wrote: > Attention FreeSWITCHers, > As we get closer to b3 I would like to ask that everyone assist me > in > testing each and every application. As an open source project we have > very limited resources in testing so I call on the community to assist > me in testing. Please report any bugs to me, or the list.. and if you > feel like it post info to http://jira.freeswitch.org. It would be > greatly appreciated. > > This includes testing with valid, invalid and really invalid input > such as long lines.. garbage and such. > > I have started a wiki page for this. We should discuss automated > application testing scenarios if possible. > > http://wiki.freeswitch.org/wiki/Testing (bare page for now as I lab > up more tests and start logging them.) > > Thanks, > Brian West > FreeSWITCH > > _______________________________________________ > Freeswitch-dev mailing list > Freeswitch-dev(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev > http://www.freeswitch.org >

2 1

Application Testing
by Brian West 07 Jan '08

07 Jan '08

Attention FreeSWITCHers, As we get closer to b3 I would like to ask that everyone assist me in testing each and every application. As an open source project we have very limited resources in testing so I call on the community to assist me in testing. Please report any bugs to me, or the list.. and if you feel like it post info to http://jira.freeswitch.org. It would be greatly appreciated. This includes testing with valid, invalid and really invalid input such as long lines.. garbage and such. I have started a wiki page for this. We should discuss automated application testing scenarios if possible. http://wiki.freeswitch.org/wiki/Testing (bare page for now as I lab up more tests and start logging them.) Thanks, Brian West FreeSWITCH

3 3

Re: [Freeswitch-dev] [Freeswitch-users] Not able to make an outgoing Call through FXO....
by Irshad Ahamed 04 Jan '08

04 Jan '08

Hi Anthony, Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/>  </condition> </extension> <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> The Openzap.conf.xml looks like below: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/>     <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/>     </analog_spans> </configuration> But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below: 2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default(a)192.168.2.51) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA: Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD freeswitch(a)sipxpbx.oneconv.com> freeswitch(a)sipxpbx.oneconv.com> freeswitch(a)sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Thanks, Irshad. On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct(a)yahoo.com> wrote: > What does openzap.conf.xml look like? > Perhaps you are using the default which only has 1 span defined. > Try cloning the whole block so there > is a span 1 and 2 like this: > > <configuration name=" openzap.conf" description="OpenZAP Configuration"> > <settings> > <param name="debug" value="0"/> > </settings> > <analog_spans> > > <param name="tonegroup" value="us"/> > <param name="digit-timeout" value="2000"/> > <param name="max-digits" value="11"/> > <param name="dialplan" value="XML"/> > <param name="context" value="default"/> >  >  >  >  > > > > <param name="tonegroup" value="us"/> > <param name="digit-timeout" value="2000"/> > <param name="max-digits" value="11"/> > <param name="dialplan" value="XML"/> > <param name="context" value="default"/> >  >  >  >  > > > > </analog_spans> > </configuration> > > > > > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > > AIM: anthm > MSN:anthony_minessale@hotmail.com > GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com > IRC: irc.freenode.net #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org > iax:guest@conference.freeswitch.org/888 > googletalk:conf+888@conference.freeswitch.org > pstn:213-799-1400 > > > ----- Original Message ---- > From: Irshad Ahamed <irshad.fswitch(a)gmail.com > > To: freeswitch-dev(a)lists.freeswitch.org; > freeswitch-users(a)lists.freeswitch.org > Sent: Wednesday, January 2, 2008 12:40:14 AM > Subject: [Freeswitch-users] Not able to make an outgoing Call through > FXO.... > > Hi, > > Wishing U all a very Happy n Prosperous New Year!!!! > > I am trying to make an outgoing call using FXO connected to an external > telephone line. > > Here is the set-up: > > 1. FXO connected to external telephone line > 2. FXS connected to analog phone. > > > The Openzap.conf @ /etc/openzap is as follows: > [span zt] > name => OpenZAP > number => 1 > fxs-channel => 1 > > [span zt] > name => OpenZAP > number => 1 > fxo-channel => 4 > > The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for > inward and outgoing calls on FXO as follows: > > <extension name="outgoing-fxo"> > <condition field="destination_number" expression="^(43)$"> > <action application="bridge" data="openzap/2/1/43"/> > </condition> > </extension> > > <extension name="incoming-fxo"> > <condition field="destination_number" expression="^(35)$"> > <action application="bridge" data="openzap/1/1"/> > </condition> > </extension> > > While Start-up Freeswitch following logs were seen: > > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for > span > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of > type zt > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 > [name]=[OpenZAP] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 > [number]=[1] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 > [fxs-channel]=[1] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type > to 'FXS' start(KEWL) > 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device > /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for > span > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of > type zt > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 > [name]=[OpenZAP] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 > [number]=[1] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 > [fxo-channel]=[4] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type > to 'FXO' start(KEWL) > 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device > /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 > 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 > channel(s) > 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 > switch_loadable_module_load_file() Successfully Loaded [mod_openzap] > > and while I made a call following logs were seen: > > 2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 > switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 > 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms > 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 > switch_channel_set_name() New Chan OPENZAP/43 > [e3630387-25d6-4031-bf81-239c3e64e3fa] > 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() > OPENZAP/43 State Change CS_NEW -> CS_INIT > 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 > switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] > 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() > outgoing_call method not implemented! > 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() > Close Channel OPENZAP/43 [CS_INIT] > 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 > switch_ivr_originate() Cannot Create Outgoing Channel! cause: > DESTINATION_OUT_OF_ORDER > 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 > switch_ivr_originate() Originate Resulted in Error Cause: 27 > [DESTINATION_OUT_OF_ORDER] > 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() > Originate Failed. Cause: DESTINATION_OUT_OF_ORDER > 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() > Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] > 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 > switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] > 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 > switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] > 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 > switch_core_session_run() (OpenZAP/43) State HANGUP > 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing > state on 1:1 from IDLE to HANGUP > 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() > OpenZAP/43 CHANNEL HANGUP > 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 > switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: > DESTINATION_OUT_OF_ORDER > 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 > switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on > external entities > 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 > switch_core_session_thread() Session 1 (OpenZAP/43) Ended > 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 > switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] > 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() > Executing state handler on 1:1 for HANGUP > 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() > Changing state on 1:1 from HANGUP to BUSY > 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() > Executing state handler on 1:1 for BUSY > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT > [ONHOOK][1:1] STATE [BUSY] > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing > state on 1:1 from BUSY to DOWN > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() > Executing state handler on 1:1 for DOWN > 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig > [STOP] > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() > ANALOG CHANNEL thread ended. > > Could anyone help me out in getting FXO working ??? > > Thanks in advance... > > BR, > Irshad. > > > > ------------------------------ > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8…> > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

1 0

Not able to make an outgoing Call through FXO....
by Irshad Ahamed 02 Jan '08

02 Jan '08

Hi, Wishing U all a very Happy n Prosperous New Year!!!! I am trying to make an outgoing call using FXO connected to an external telephone line. Here is the set-up: 1. FXO connected to external telephone line 2. FXS connected to analog phone. The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1 [span zt] name => OpenZAP number => 1 fxo-channel => 4 The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows: <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> <extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension> While Start-up Freeswitch following logs were seen: 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap] and while I made a call following logs were seen: 2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Could anyone help me out in getting FXO working ??? Thanks in advance... BR, Irshad.

1 0

bug policy
by Raymond Chandler 30 Dec '07

30 Dec '07

It's recently come to my attention that people are posting bugs in various places on the internet (websites, blogs, etc that seem to have no official affiliation with FreeSWITCH). That, in and of itself, doesn't really strike me as all that bazaar or harmful. I am, however, a bit confused by the fact that the bugs reported in some such forums aren't in jira. Why would someone who claims to be a "member" of the community post a bug to a site not affiliated with FreeSWITCH? Is this an accepted/condoned action? Should a person that posts to a public site rather than to jira expect to receive any support (or inclusion in the project) whatsoever? While I don't claim to be a mind-reader and, hence, cannot tell why a person would do these types of things. I personally feel that the persons responsible for such posts are intentionally trying to defame the project. Since that is my interpretation of the ongoing events, I'm not posting any links to such resources as that would likely just help the author(s) in their goal since i believe googlebot regularly crawls the ML archives. In many projects, there is policy for almost everything. There's policy on where to post bugs and what information to include, where to ask for help, even how many spaces and tabs to use when helping write code. So, what is the FreeSWITCH policy? Is there a FreeSWITCH policy? Is it not thought a good idea to implement such a policy for FreeSWITCH (if it doesn't exist as yet)? If there is currently policy regulating such things, where can one read about it? Since I've "joined" the community, I've tried to help the project in any way I can (reporting bugs that I find, submitting what patches I can, documenting, etc), so I find it a bit offensive that there are people in the community that would do things to hurt the project in any way. By "joined", I mean when I decided that this was a worthwhile project and decided to help where I can, we all know that there's not an actual initiation or anything. I'm pretty sure that the lead devs wouldn't be inclined to approve of the afforementioned actions, but what I really want to know is how others feel (i.e. am I silly for being offended?) and what's expected of a "member" of the community. --ilm

2 1

How to make Attended Call Transfer as Transferor??
by Irshad Ahamed 28 Dec '07

28 Dec '07

Hi, I have installed Freeswitch successfully on my machine. I was trying to perform an Attended Call transfer to other endpoint in the same domain as a Transferor. But I couldn't find how exactly I should do that. It would be really great if someone helps me out in telling the procedures to follow. I have tried out Call Transfer as Transferee and it works fine. Thanks in Advance... Best Regards, Irshad.

3 6

ATTNETION Javascript DTMF Callback Changes ATTENTION
by Brian West 27 Dec '07

27 Dec '07

http://wiki.freeswitch.org/wiki/Javascript_DTMF_Callback_Function The callback has been changed slightly. In addition to the dtmf.digit you get dtmf.duration. Please refer to the Wiki Page for more information. Thanks, Brian West

1 0