- FreeSWITCH-dev - FreeSWITCH Mailing Lists

"intercept_unbridged_only=true" Not Working
by Jerry Richards 16 Nov '10

16 Nov '10

Hello, The <action application="set" data="intercept_unbridged_only=true"/> statement does not work for me. I added it to the <extension name="intercept_ext"> of the default dialplan, but it still unconditionally bridges to a call even after it has already been answered. Am I missing a tag? <extension name="intercept-ext"> <condition field="destination_number" expression="^\*\*(\d+)$"> <action application="set" data="intercept_unbridged_only=true"/> <action application="answer"/> <action application="intercept" data="${hash(select/${domain_name}-last_dial_ext/$1)}"/> <action application="sleep" data="2000"/> </condition> </extension> Thanks, Jerry

3 6

Repeat 180 RINGING messages
by Kevin Snow 16 Nov '10

16 Nov '10

I¹d like to be able to make 180 RINGING messages be repeated to the caller every X seconds until the 200 OK (or other error). I dug through the source & FreeSWITCH book but didn¹t see a mechanism for doing this. Does FS have such a thing? Thanks Kevin

4 4

Question about presence_id
by Beeton, Carolyn (Carolyn) 15 Nov '10

15 Nov '10

I am trying to understand the PRESENCE_IN events that are sent on call init, answer, and hangup. I have two endpoints registered to Freeswitch, configured in the dialplan with presence_id set. One set calls the other. There is one event for each leg of the call, inbound and outbound. The events contain the Channel-Name and the Channel-Presence-ID, and I would expect these to match (i.e. each event contains the presence_id of that leg), but it seems that for the inbound leg, they only match on the "ringing" event, not the "answered" and "hangup" event. The two events for "answered" and "hangup" both have the presence_id of the callee, regardless of the Call-Direction. Is this intentional? (I think it is the reason that lights stick on in certain scenarios - for example, if there are subscribers to the caller but not the callee then no notifications are sent on hangup) Carolyn

2 9

stfu jitterbuffer in FS
by Jyotshna Cherukuri 15 Nov '10

15 Nov '10

Hi, I enabled Jitterbuffer in FS for A leg of the call and when I set up packet loss simulation(4%) on my end client I expected FS to tag the lost packets as SFF_PLC but its not .I rather see the below code being executed . Could you please explain what this code does in stfu.c? i->miss_count++; if (i->miss_count > 10 || (i->in_queue->array_len == i->in_queue->array_size) || tried >= i->in_queue->array_size) { i->running = 0; i->interval = 0; i->out_queue->wr_len = i->out_queue->array_size; return NULL; } Any help is greatly appreciated Thanks Jyotshna

2 1

VLAN support in sofia module
by Adam Kuśmirek 15 Nov '10

15 Nov '10

Hi All I would like to run FreeSwitch as SBC in my network. I have architecture with all clients connected via separate vlans. It gives me possibility to use one ip address for all clients, but I need FS sofia profile to bind to specific interface (eg eth0:20 vlan 20) and global ip address. As I see, for now sofia module allows to bind to ip address only. I looked quickly to sourcees and it seems that this is limited by sofia library. Of course i may be wrong because I'm new to FS and didn't have time to analyze sources. Please, write some words on this topic. Do you have plans to implement vlan support in FS. I know that AcmePacket Net-Net gives such feature. Don't know any open voip solution with this iplemented. Regards Adam

5 7

ftmod_libpri - RDNIS patch
by lakshmanan ganapathy 15 Nov '10

15 Nov '10

Hi all, Please find the attached patch file which contain a small change to handle RDNIS in ftmod_libpri. Somebody can review it and find ok, do commit it. regards, Lakshmanan G.

2 1

FreeSWITCH Snapshot Information
by Michael Collins 12 Nov '10

12 Nov '10

Hello all, It was recently brought to my attention that the freeswitch-snapshot files were not getting updated properly. It turns out that the cron process was still using the SVN repo! Our bad. I have fixed the snapshot to use the git repo. I manually ran the script and it created new snapshot files which can be downloaded now. I will monitor the cron job this weekend to confirm if it is properly generating new files each night. Note: it can take up to 24 hours from the time the cron job runs to the time you see the files over at files.freeswitch.org so be patient. The new files are: freeswitch-snapshot.tar.bz2 freeswitch-snapshot.tar.bz2.md5 freeswitch-snapshot.tar.bz2.sha1 freeswitch-snapshot.tar.gz freeswitch-snapshot.tar.gz.md5 freeswitch-snapshot.tar.gz.sha1 The files should be dated 2010-Nov-12. Any files earlier than this should be considered unreliable. Feel free to try the snapshot on your system. Remember that the snapshots are pre-bootstrapped so you can go straight to the ./configure && make install process. Email me off list if you have any questions. Thanks, Michael

1 0

Minor log cleanup in sofia_reg.c
by Beeton, Carolyn (Carolyn) 11 Nov '10

11 Nov '10

Here's a patch for a minor log cleanup in sofia_reg.c. The "forbidden" variable is never set, so the logs keep showing a "challenge" being sent instead of "forbidden", when a registration is rejected. diff --git a/src/mod/endpoints/mod_sofia/sofia_reg.c b/src/mod/endpoints/mod_sofia/sofia_reg.c index 67641ae..61bb4aa 100644 --- a/src/mod/endpoints/mod_sofia/sofia_reg.c +++ b/src/mod/endpoints/mod_sofia/sofia_reg.c @@ -816,7 +816,7 @@ uint8_t sofia_reg_handle_register(nua_t *nua, sofia_profile_t *profile, nua_hand char contact_str[1024] = ""; int nat_hack = 0; uint8_t multi_reg = 0, multi_reg_contact = 0, avoid_multi_reg = 0; - uint8_t stale = 0, forbidden = 0; + uint8_t stale = 0; auth_res_t auth_res; long exptime = 300; switch_event_t *event; @@ -1115,7 +1115,7 @@ uint8_t sofia_reg_handle_register(nua_t *nua, sofia_profile_t *profile, nua_hand if (auth_res != AUTH_OK && !stale) { if (profile->debug) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_DEBUG, "Send %s for [%s@%s]\n", forbidden ? "forbidden" : "challenge", to_user, to_host); + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_DEBUG, "Send %s for [%s@%s]\n", (auth_res == AUTH_FORBIDDEN) ? "forbidden" : "challenge", to_user, to_host); } if (auth_res == AUTH_FORBIDDEN) { nua_respond(nh, SIP_403_FORBIDDEN, NUTAG_WITH_THIS(nua), TAG_END());

2 1

Announcing the Jester Mail project
by Chad Phillips -- Apartment Lines 11 Nov '10

11 Nov '10

With funding and support from Star2Star Communications, and in conjunction with FreeSWITCH Solutions, I will soon be embarking on a project to bring a drop-in replacement for Asterisk's Comedian Mail to the FreeSWITCH platform. As I learned in my own move from Asterisk to FreeSWITCH, one of the bigger challenges was finding a transparent way to transition my user's voicemail experience. Since FreeSWITCH's native voicemail module did not adequately meet this need, I elected to write my own voicemail system, leveraging Lua -- the recommended scripting language for integrating complex tasks into the dialplan. The underlying concept in Jester Mail is to provide a flexible, extensible, and easily customizable voicemail plugin for FreeSWITCH. Unlike mod_voicemail, the code/configuration will be written in either XML or Lua, so that it will be easily hackable should the need arise. Every effort will be made to make the components modular and configurable, to avoid the need to rewrite any of the core functionality. Initial alpha releases will be based on my existing company's code, adding more and more of the standard Comedian Mail features, culminating in the 1.0 release, which will be a complete drop in replacement for Comedian Mail. Future releases may extend functionality even beyond that provided in Comedian Mail -- we'll see about that when we get there. :) We'd like to encourage people to offer feedback and insight on the project as it progresses, and we'll do our best (as it fits into our budget, timeline, and larger goals) to incorporate this into our final product in a way that is most beneficial for all in the community. Within the next 2-3 weeks, I'll be posting a strategy/architecture battle plan on the FreeSWITCH wiki. A few weeks after that I'll commit the initial pre-alpha code to the contributions repository for community feedback. There should be two nice side effects of this project: a) More people should be willing to make the transition from Asterisk to FreeSWITCH, as this removes another significant barrier for some. b) We will have excellent new resource to point people to for learning how to leverage Lua in FreeSWITCH. Chad Phillips aka hunmonk

1 0

FreeSWITCH Conference Call Today
by Michael Collins 10 Nov '10

10 Nov '10

Hey folks, Today's agenda is here: http://wiki.freeswitch.org/wiki/FS_weekly_2010_11_10 We have a special announcement from Chad Philips and Kristian Kielhofner so be sure to join us today! -Michael

1 0