January 2008 - freeswitch-dev@lists.freeswitch.org

[Freeswitch-dev] Issue with Call Hold @ Freeswitch FXS....
by freeswitch-dev＠lists.freeswitch.org 08 Jan '08

08 Jan '08

Set-up is as below: 1. Freeswitch is configured as UA with Asterisk TDM card (Openzap) 1 FXS + 1 FXO registered with SIPX. 2. SNOM300 registered with SIPX SNOM300: Kernel Version:snom300 linux 3.25 Application-Version:snom300-SIP 6.5.2 Rootfs-Version:snom300 jffs2 v3.36 Firmware-URL: Production Information:Mac:00041325329C;Version:Standard;Hardware:snom300 (MB V3.2_A11);Date:26/06/06;Copyright(C) snom technology AG 3. GRANDSTREAM registered with SIPX. GRANDSTREAM: Product Model: GXP2000 Software : Program-- 1.1.4.18 Version : Bootloader-- 1.1.4.6 Procedure followed: 1. Make a successful call from Freeswitch FXS to SNOM300. Put the call on hold @ Freeswitch FXS and make new call to GRANDSTREAM. 2. Accept the call @ GRANDSTREAM and disconnect the connected call @ FREESWITCH FXS. 3. The second call with GRANDSTREAM is being disconnected but the first call with SNOM300 is still alive at SNOM300. NOTE: Please find the Freeswitch logs and Ethereal caps @ http://jira.freeswitch.org/browse/MODENDP-74 BR, Irshad.

1 0

[Freeswitch-dev] Crash while incoming Call with improper dialplan/default.xml
by Irshad Ahamed 07 Jan '08

07 Jan '08

Hi, Crash has been found with Freeswitch when we configure the dialplan/default.xml as follows. <extension name="incoming"> <condition field="destination_number" expression="^(7001)$"> <action application="bridge" data="openzap"/> </condition> </extension> Procedures followed: 1. Configure for incoming call as above in your dialplan/default.xml 2. Run Freeswitch and register FXS with sipx. 3. After successful registration, make an inward call from other registered endpoint to Freeswitch FXS. It will result in a crash. BR, Irshad. On Jan 6, 2008 2:05 AM, Brian West <brian.west(a)mac.com> wrote: > Attention FreeSWITCHers, > As we get closer to b3 I would like to ask that everyone assist me > in > testing each and every application. As an open source project we have > very limited resources in testing so I call on the community to assist > me in testing. Please report any bugs to me, or the list.. and if you > feel like it post info to http://jira.freeswitch.org. It would be > greatly appreciated. > > This includes testing with valid, invalid and really invalid input > such as long lines.. garbage and such. > > I have started a wiki page for this. We should discuss automated > application testing scenarios if possible. > > http://wiki.freeswitch.org/wiki/Testing (bare page for now as I lab > up more tests and start logging them.) > > Thanks, > Brian West > FreeSWITCH > > _______________________________________________ > Freeswitch-dev mailing list > Freeswitch-dev(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev > http://www.freeswitch.org >

2 1

[Freeswitch-dev] Application Testing
by Brian West 07 Jan '08

07 Jan '08

Attention FreeSWITCHers, As we get closer to b3 I would like to ask that everyone assist me in testing each and every application. As an open source project we have very limited resources in testing so I call on the community to assist me in testing. Please report any bugs to me, or the list.. and if you feel like it post info to http://jira.freeswitch.org. It would be greatly appreciated. This includes testing with valid, invalid and really invalid input such as long lines.. garbage and such. I have started a wiki page for this. We should discuss automated application testing scenarios if possible. http://wiki.freeswitch.org/wiki/Testing (bare page for now as I lab up more tests and start logging them.) Thanks, Brian West FreeSWITCH

3 3

Re: [Freeswitch-dev] [Freeswitch-users] Not able to make an outgoing Call through FXO....
by Irshad Ahamed 04 Jan '08

04 Jan '08

Hi Anthony, Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/>  </condition> </extension> <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> The Openzap.conf.xml looks like below: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/>     <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/>     </analog_spans> </configuration> But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below: 2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default(a)192.168.2.51) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA: Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD freeswitch(a)sipxpbx.oneconv.com> freeswitch(a)sipxpbx.oneconv.com> freeswitch(a)sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Thanks, Irshad. On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct(a)yahoo.com> wrote: > What does openzap.conf.xml look like? > Perhaps you are using the default which only has 1 span defined. > Try cloning the whole block so there > is a span 1 and 2 like this: > > <configuration name=" openzap.conf" description="OpenZAP Configuration"> > <settings> > <param name="debug" value="0"/> > </settings> > <analog_spans> > > <param name="tonegroup" value="us"/> > <param name="digit-timeout" value="2000"/> > <param name="max-digits" value="11"/> > <param name="dialplan" value="XML"/> > <param name="context" value="default"/> >  >  >  >  > > > > <param name="tonegroup" value="us"/> > <param name="digit-timeout" value="2000"/> > <param name="max-digits" value="11"/> > <param name="dialplan" value="XML"/> > <param name="context" value="default"/> >  >  >  >  > > > > </analog_spans> > </configuration> > > > > > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > > AIM: anthm > MSN:anthony_minessale@hotmail.com > GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com > IRC: irc.freenode.net #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org > iax:guest@conference.freeswitch.org/888 > googletalk:conf+888@conference.freeswitch.org > pstn:213-799-1400 > > > ----- Original Message ---- > From: Irshad Ahamed <irshad.fswitch(a)gmail.com > > To: freeswitch-dev(a)lists.freeswitch.org; > freeswitch-users(a)lists.freeswitch.org > Sent: Wednesday, January 2, 2008 12:40:14 AM > Subject: [Freeswitch-users] Not able to make an outgoing Call through > FXO.... > > Hi, > > Wishing U all a very Happy n Prosperous New Year!!!! > > I am trying to make an outgoing call using FXO connected to an external > telephone line. > > Here is the set-up: > > 1. FXO connected to external telephone line > 2. FXS connected to analog phone. > > > The Openzap.conf @ /etc/openzap is as follows: > [span zt] > name => OpenZAP > number => 1 > fxs-channel => 1 > > [span zt] > name => OpenZAP > number => 1 > fxo-channel => 4 > > The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for > inward and outgoing calls on FXO as follows: > > <extension name="outgoing-fxo"> > <condition field="destination_number" expression="^(43)$"> > <action application="bridge" data="openzap/2/1/43"/> > </condition> > </extension> > > <extension name="incoming-fxo"> > <condition field="destination_number" expression="^(35)$"> > <action application="bridge" data="openzap/1/1"/> > </condition> > </extension> > > While Start-up Freeswitch following logs were seen: > > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for > span > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of > type zt > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 > [name]=[OpenZAP] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 > [number]=[1] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 > [fxs-channel]=[1] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type > to 'FXS' start(KEWL) > 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device > /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for > span > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of > type zt > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 > [name]=[OpenZAP] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 > [number]=[1] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 > [fxo-channel]=[4] > 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type > to 'FXO' start(KEWL) > 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device > /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 > 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 > channel(s) > 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 > switch_loadable_module_load_file() Successfully Loaded [mod_openzap] > > and while I made a call following logs were seen: > > 2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 > switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 > 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms > 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 > switch_channel_set_name() New Chan OPENZAP/43 > [e3630387-25d6-4031-bf81-239c3e64e3fa] > 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() > OPENZAP/43 State Change CS_NEW -> CS_INIT > 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 > switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] > 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() > outgoing_call method not implemented! > 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() > Close Channel OPENZAP/43 [CS_INIT] > 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 > switch_ivr_originate() Cannot Create Outgoing Channel! cause: > DESTINATION_OUT_OF_ORDER > 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 > switch_ivr_originate() Originate Resulted in Error Cause: 27 > [DESTINATION_OUT_OF_ORDER] > 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() > Originate Failed. Cause: DESTINATION_OUT_OF_ORDER > 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() > Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] > 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 > switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] > 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 > switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] > 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 > switch_core_session_run() (OpenZAP/43) State HANGUP > 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing > state on 1:1 from IDLE to HANGUP > 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() > OpenZAP/43 CHANNEL HANGUP > 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 > switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: > DESTINATION_OUT_OF_ORDER > 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 > switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on > external entities > 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 > switch_core_session_thread() Session 1 (OpenZAP/43) Ended > 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 > switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] > 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() > Executing state handler on 1:1 for HANGUP > 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() > Changing state on 1:1 from HANGUP to BUSY > 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() > Executing state handler on 1:1 for BUSY > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT > [ONHOOK][1:1] STATE [BUSY] > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing > state on 1:1 from BUSY to DOWN > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() > Executing state handler on 1:1 for DOWN > 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig > [STOP] > 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() > ANALOG CHANNEL thread ended. > > Could anyone help me out in getting FXO working ??? > > Thanks in advance... > > BR, > Irshad. > > > > ------------------------------ > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8…> > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

1 0

[Freeswitch-dev] Not able to make an outgoing Call through FXO....
by Irshad Ahamed 02 Jan '08

02 Jan '08

Hi, Wishing U all a very Happy n Prosperous New Year!!!! I am trying to make an outgoing call using FXO connected to an external telephone line. Here is the set-up: 1. FXO connected to external telephone line 2. FXS connected to analog phone. The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1 [span zt] name => OpenZAP number => 1 fxo-channel => 4 The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows: <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> <extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension> While Start-up Freeswitch following logs were seen: 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap] and while I made a call following logs were seen: 2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Could anyone help me out in getting FXO working ??? Thanks in advance... BR, Irshad.

1 0