October 2007 - freeswitch-dev@lists.freeswitch.org

[Freeswitch-dev] ipv6 in SDP has been in the RFC since 2002
by Brian West 27 Oct '07

27 Oct '07

http://www.packetizer.com/rfc/rfc3266 I hear this has come to someones attention. /b

1 0

Re: [Freeswitch-dev] [Freeswitch-users] Presence doesn't work on windows
by Brian West 26 Oct '07

26 Oct '07

Have you tried SVN as of today? <param name="manage-presence" value="true"/> also in sofia.conf needs to be on. /b On Oct 25, 2007, at 8:42 PM, Hassan Firouzbakht wrote: > Hi, > It seems Presence doesn't work on windows or at least there is a > special configuration that I am not aware about that. > > I appreciate if somebody tell me what is wrong in here. > > Here is the procedures: > 1) Sent SIP Subscribe , Request event is = Presence.winfo (Watcher > info) > 2) Received 202 - Accept. > 3) Waited for SIP Notify message. > 4) Nothing happened > > Again > 1) Sent SIP Subscribe to add a buddy into my contact list, Request > event is = presence. > 2) Received 202 -Accept. > 3) Waited for SIP Notify message, > 4) Nothing happened > > In another scenario > > 1) Sent SIP Publish with my status in pidf+xml format > 2) Received 202 -Accept. > 4) Nothing happened > > Thanks a lot, > > Hassan > > R U Ready for Windows Live Messenger Beta 8.5? Try it today! > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org

3 3

[Freeswitch-dev] Presence doesn't work on windows
by Hassan Firouzbakht 26 Oct '07

26 Oct '07

Hi, It seems Presence doesn't work on windows or at least there is a special configuration that I am not aware about that. I appreciate if somebody tell me what is wrong in here. Here is the procedures: 1) Sent SIP Subscribe , Request event is = Presence.winfo (Watcher info) 2) Received 202 - Accept. 3) Waited for SIP Notify message. 4) Nothing happened Again 1) Sent SIP Subscribe to add a buddy into my contact list, Request event is = presence. 2) Received 202 -Accept. 3) Waited for SIP Notify message, 4) Nothing happened In another scenario 1) Sent SIP Publish with my status in pidf+xml format 2) Received 202 -Accept. 4) Nothing happened Thanks a lot, Hassan _________________________________________________________________ R U Ready for Windows Live Messenger Beta 8.5? Try it today! http://entertainment.sympatico.msn.ca/WindowsLiveMessenger

1 0

Re: [Freeswitch-dev] Freeswitch Jobs Available
by Martin Bitzinger 25 Oct '07

25 Oct '07

Hi David, What we would be looking for is work on predefined work packages that somebody can do as a teleworker. Is that something you would be interested in? Regards Martin -----Ursprüngliche Nachricht----- Von: freeswitch-dev-bounces(a)lists.freeswitch.org [mailto:freeswitch-dev-bounces@lists.freeswitch.org] Im Auftrag von David Elbel Gesendet: Dienstag, 23. Oktober 2007 20:37 An: freeswitch-dev(a)lists.freeswitch.org Betreff: Re: [Freeswitch-dev] Freeswitch Jobs Available Hello, I am interested in Freeswitch development work, included is my resume. Thanks! I am located in the GMT-8 timezone On 10/23/07, Martin Bitzinger <bitzinger(a)comdasys.com> wrote: > Hello Together, > > We are a German based Company using FreeSwitch for some of our projects. > For those we often have to do changes / enhancements to FreeSwitch. We > are currently looking for help doing that, so I thought why not ask > the experts here on the developer mailing list. So anybody interested > in doing some paid programming work on Freeswitch, just drop me an Email. > > Regards > > Martin Bitzinger > Comdasys AG > > _______________________________________________ > Freeswitch-dev mailing list > Freeswitch-dev(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev > http://www.freeswitch.org >

1 0

Re: [Freeswitch-dev] Freeswitch Jobs Available
by Jan Berger 24 Oct '07

24 Oct '07

Hi David, I had a quick look at your CV, so I took the liberty of sugesting a 'minor' change. /j

2 1

[Freeswitch-dev] Freeswitch Jobs Available
by Martin Bitzinger 23 Oct '07

23 Oct '07

Hello Together, We are a German based Company using FreeSwitch for some of our projects. For those we often have to do changes / enhancements to FreeSwitch. We are currently looking for help doing that, so I thought why not ask the experts here on the developer mailing list. So anybody interested in doing some paid programming work on Freeswitch, just drop me an Email. Regards Martin Bitzinger Comdasys AG

2 1

[Freeswitch-dev] SRTP to RTP and SIPS TLS
by Maxim Karp 23 Oct '07

23 Oct '07

Hello, Has anyone used freeSWITCH as a User Agent to convert inbound SRTP media streams to RTP before routing them to a secondary SIP proxy, SBC or Call Manager? How about using TLS to encrypt SIP signaling? Thanks in advance, Maxim.

1 0

[Freeswitch-dev] mod_sofia compilation problem on win32
by Maxim Karp 22 Oct '07

22 Oct '07

Hello, Trying to compile latest version of mod_sofia on win32 and am getting the following errors and warnings: 1>------ Build started: Project: mod_sofia, Configuration: Debug Win32 ------ 1>Compiling... 1>sofia.c 1>.\sofia.c(2078) : error C2143: syntax error : missing ';' before 'type' 1>.\sofia.c(2082) : error C2065: 'from_key' : undeclared identifier 1>.\sofia.c(2082) : warning C4047: 'function' : 'char *' differs in levels of indirection from 'int' 1>.\sofia.c(2082) : warning C4024: 'sofia_reg_find_gateway__' : different types for formal and actual parameter 4 Any ideas? Maxim.

2 2

[Freeswitch-dev] Mac OSX mod_portaudio build problem
by Tamas 22 Oct '07

22 Oct '07

Hello, I have a build issue on Mac OSX 10.4.2 Mac Mini (PPC) - SVN r6015. In the 1st run FreeSWITCH (bootstrap.sh) complained for old automake so I hade to download Macports and install new automake (than set the PATH variable: PATH=/opt/local/bin:/opt/local/sbin:$PATH). After this step, bootstrap.sh did it's work and configure made too. FS compiled fine in this step - with the default modules.conf settings. I added speex and portaudio, where speex was OK while at mod_portaudio build, libs/portaudio compilation failed with: making all mod_portaudio gcc -c -g -O2 -DPA_BIG_ENDIAN -arch i386 -arch ppc -isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.3 -I./include -I./src/common -I./src/os/unix -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DWORDS_BIGENDIAN=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_NANOSLEEP=1 -DPA_USE_COREAUDIO=1 -DHAVE_LIBKERN_OSATOMIC_H=1 src/common/pa_cpuload.c -fno-common -DPIC -o src/common/pa_cpuload.o cc1: error: invalid option 'macosx-version-min=10.3' cc1: error: invalid option 'macosx-version-min=10.3' lipo: can't figure out the architecture type of: /var/tmp//ccWylNiN.out make[6]: *** [src/common/pa_cpuload.lo] Error 1 make[5]: *** [../../../../libs/portaudio/lib/libportaudio.la] Error 2 make[4]: *** [all] Error 1 make[3]: *** [mod_portaudio-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 As a quick hack I removed the -macosx-version-min=10.3 switch from the libs/portaudio/Makefile file (2 places) and started again. make went over this issue but dropped this error: gcc -c -g -O2 -DPA_BIG_ENDIAN -arch i386 -arch ppc -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I./src/common -I./src/os/unix -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DWORDS_BIGENDIAN=1 -DSIZEOF_SHORT=2 -DSIZEOF_INT=4 -DSIZEOF_LONG=4 -DHAVE_NANOSLEEP=1 -DPA_USE_COREAUDIO=1 -DHAVE_LIBKERN_OSATOMIC_H=1 src/common/pa_cpuload.c -fno-common -DPIC -o src/common/pa_cpuload.o src/common/pa_cpuload.c:55:20: error: assert.h: No such file or directory src/common/pa_cpuload.c:55:20: error: assert.h: No such file or directory lipo: can't figure out the architecture type of: /var/tmp//ccZF5Xkv.out make[6]: *** [src/common/pa_cpuload.lo] Error 1 make[5]: *** [../../../../libs/portaudio/lib/libportaudio.la] Error 2 make[4]: *** [all] Error 1 make[3]: *** [mod_portaudio-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 As I'm a newbie in Mac and Mac OSX, I could make something wrong with preparing the system, so this could be mine fault instead of FS's. (I got a Mac Mini for testing with supervisor login, added xcodetools from the bundled CD than I continued adding subversion for Mac from the net and then MacPorts). uname -a: Darwin visnet-303.lan 8.0.0 Darwin Kernel Version 8.0.0: Sat Mar 26 14:15:22 PST 2005; root:xnu-792.obj~1/RELEASE_PPC Power Macintosh powerpc visnet-303:~/fs supervisor$ sudo find / | grep assert.h Password: /Library/Frameworks/Python.framework/Versions/2.5/Resources/English.lproj/Documentation/ref/assert.html /System/Library/Frameworks/Kernel.framework/Versions/A/Headers/IOKit/assert.h /System/Library/Frameworks/Kernel.framework/Versions/A/Headers/kern/assert.h /usr/include/assert.h /usr/include/net-snmp/library/snmp_assert.h /usr/include/php/ext/standard/php_assert.h Unfortunately the "Software upgrade" doesn't work on this mac (it just crashes) so I don't know how to upgrade to newer versions (like 10.4.9). Thank you in advance, Tamas

5 8

[Freeswitch-dev] H323
by Brian West 22 Oct '07

22 Oct '07

Show of hands who would like to see native H323 support in FreeSWITCH? http://www.opalvoip.org/, which now compiles and works on OS X, Windows and Linux for sure. Also check out http://www.woomeravoip.org/ Thanks, Brian West

3 3