- FreeSWITCH-users - FreeSWITCH Mailing Lists

B2BUA behavior.
by M. Ranganathan 25 Mar '10

25 Mar '10

Hello, I am learning about FreeSWITCH. If I allocate a B2BUA in freeSWITCH and send it a REFER, will the REFER be passed through transparently or converted to an INVITE? If it is the latter behavior, is it possible to configure FreeSWITCH to pass the REFER through? Thanks -- M. Ranganathan

2 1

Cannot lock pid
by Ken Fulmer 25 Mar '10

25 Mar '10

Cannot lock pid file /opt/freeswitch/run/freeswitch.pid. We see the above error when attempting to start FreeSwitch on Ubuntu 9.10 server. Has anyone seen this before? Thanks, Ken Fulmer

4 6

Move config between 16272M and 17084M does not work
by Fabio Pietrosanti (naif) 25 Mar '10

25 Mar '10

Hi, yesterday i spent half a day trying to figure out what was happening in trying to move a configuration (that lookup dynamically via mod_xml_curl directory and dialplan) from FreeSWITCH version 16272M to 17084M . I've done a clean install and just moved only the few lines required by hand. Didn't worked: - On registration dynamic lookup works fine and users can login with password stored on remote server - On dial dynamic lookup of dialplan does not work and die with: 2010-03-25 08:33:47.777741 [ERR] mod_dialplan_xml.c:440 Open of dialplan failed I also tried to get the whoole /usr/local/freeswitch/conf of version "FreeSWITCH Version 1.0.5-20100109-0400 (16272M)" and put it as a replacement on top of the "FreeSWITCH Version 1.0.5-20100321-0400 (17084M)" but the problem remain exactly the same: - Registration works via dynamic lookup via mod_xml_curl - Dialing does not work and dynamic lookup via mod_xml_curl does not work In both case the configuration regarding mod_xml_curl is the following that works on 16272M but does not work on 17084M and is written in autoload_configs/xml_curl.conf.xml <binding name="directory"> <param name="gateway-url" value="http://xxx/directory" bindings="directory"/> <param name="auth-scheme" value="digest"/> </binding> <binding name="dialplan"> <param name="gateway-url" value="http://xxx/dialplan" bindings="dialplan"/> </binding> In both case i see in the log the correct initialization of xml_curl: 2010-03-25 08:29:50.193915 [NOTICE] mod_xml_curl.c:684 Binding [directory] XML Fetch Function [http://xxx/directory] [directory] 2010-03-25 08:29:50.193953 [NOTICE] mod_xml_curl.c:684 Binding [dialplan] XML Fetch Function [http://xxx/dialplan] [dialplan] 2010-03-25 08:29:50.196983 [CONSOLE] switch_loadable_module.c:900 Successfully Loaded [mod_xml_curl] 2010-03-25 08:29:50.197019 [NOTICE] switch_loadable_module.c:272 Adding API Function 'xml_curl' The same configuration works on 16272M but is broken on 17084M . There's some modification that was done to dialplan and/or to mod_xml_curl that could cause this issue? Is there some specific debugging i can do to understand if it's a bug (like it seems) or some configuration parameters changed regarding the dialplan lookup via mod_xml_curl ? Waiting for yours Fabio Pietrosanti

3 4

Invalid Boost Version 103 Expecting 100
by Thangappan.M 25 Mar '10

25 Mar '10

Dear all, Compiled the wanpipe with freeswitch and configured it. When I originate a call from the freeswitch command line it said the following error and got core dump. freeswitch@IVRFreeSWITCH> originate openzap/smg_prid/a/9940464753 &park() 2010-03-24 13:46:45.862315 [WARNING] sangoma_boost_client.c:246 TX EVENT (P): SYSTEM_RESTART:(87) [w1g1] Rc=0 CSid=0 Seq=0 2010-03-24 13:46:45.862315 [CRIT] sangoma_boost_client.c:355 Invalid Boost Version 103 Expecting 100 2010-03-24 13:46:45.862315 [CRIT] sangoma_boost_client.c:369 Critical Error: PQ Invalid Event lenght from boost rxlen=27 evsz=1027 NOTE: freeswitch version is 1.0.trunk ( 17084) wanpipe version is 3.5.8.6. smg_prid version is 1.63 Please help me......... -- Regards, Thangappan.M

2 2

hangup leg B from registered on another FS
by Madovsky 25 Mar '10

25 Mar '10

Hi, maybe it's my mistake: 2 FS running with a shared DB, same sip profile. if leg A registered on FS 1 call leg B registered on FS 2 and hangs up, leg B stays onlline even after rtp time out. also every registration take a row for every node in sip_registration table, is it ok ? Thanks

1 0

Success with a TDM410P finally
by Joseph L. Casale 24 Mar '10

24 Mar '10

Finally got this working but have a couple simple things to work out. The gain seems rather excessive, I assumed zt.conf's rx|txgain was where this needed to be adjusted, but values did not have an effect there. I have disabled the echo canceller in zt.conf as per the recent thread and the results with the mg2 canceller are not very good, is it also required to be disabled when using any echo canceller in dahdi? Thanks, jlc

3 8

Javascript and Events
by Fraser Redmond 24 Mar '10

24 Mar '10

I'm trying to get me head round events in Javascript. Looking at this page: http://wiki.freeswitch.org/wiki/Javascript_Event ...I'd thought I should be able to take the first example and run it in a call, so that it's listening for all(?) events. Then take the second example and fire an event. But nothing is happening. I had a good read through this thread from a year ago: http://lists.freeswitch.org/pipermail/freeswitch-users/2009-January/038246.… ...but it seemed to say the resolution was in the event-listener. In the listener code I changed this: if (type == "event") { console_log("notice", "Event: " + event_obj.serialize() + "\n"); } ...to this: console_log("notice", "something: " + type + "\n"); And nothing comes up at all (unless I press a key for "dtmf") Does the javascript event listener only listen for events on it's own session/channel somehow? I'd thought about adding something like this to the event-firer: e.addHeader("Unique-ID", "8e187c47-da72-471e-82af-adab0bae9347"); Cheers, Fraser

2 1

donating german prompts
by Christian Löschenkohl 24 Mar '10

24 Mar '10

hello we are going to produce a full set of german audio prompts and donate them to this wonderful project. i have attached a prompt list with the phrases we are going to record. the source of this prompt list is the file docs/phrase/phrase_de.xml. i have also compared it with the english file under docs/phrase/phrase_en.xml an merged this two + translated what was needed/had not been present in the german langunge file from english to german. i would be happy if someone could give me feedback on this and at best review the phrase list in terms of correctness and completeness. br -- Ing. Christian Löschenkohl Technische Leitung, Forschung & Entwicklung VoIP xpirio Telekommunikation & Service GmbH Lakeside B04 9020 Klagenfurt Austria T +43 (0) 5 77 11 - 1000 F +43 (0) 5 77 11 - 1002 E christian.loeschenkohl(a)xpirio.com

2 2

ringback
by Joseph L. Casale 24 Mar '10

24 Mar '10

To answer a call and provide a ringtone during the transfer (while the destination ua rings and awaits answering), do I simply need to: <action application="set" data="transfer_ringback="$${us-ring}"/> <action application="answer"/> <action application="transfer" data="..."/> Thanks, jlc

2 2

When leg on hold hangs up, another leg is hanged up too
by Maciej Aniserowicz 24 Mar '10

24 Mar '10

Hello, it's me again, I noticed then these steps: 1) dial 2 calls bgapi originate {ignore_early_media=true}sofia/gateway/agent_gateway/2500 &park() bgapi originate {ignore_early_media=true}sofia/gateway/g2/2501 &park() 2) bridge them bgapi uuid_transfer f0c0db16-f00f-4b0b-8a00-d3b108d121b2 intercept:a85fd47e-051f-42ea-987e-f4e090c7ae78,park inline 3) put the 2nd call on hold: uuid_hold a85fd47e-051f-42ea-987e-f4e090c7ae78 4) hangup the 2nd call uuid_kill a85fd47e-051f-42ea-987e-f4e090c7ae78 cause the 1st call to be hanged up as well. I want it to be parked in this situation. When I set the [park_after_bridge=true] var in dialstring, it works just like I want it to. Is setting this variable the proper way of accomplishing it - keeping channel alive when the other leg put on hold hangs up? Thanks, Maciej Aniserowicz -- View this message in context: http://n2.nabble.com/When-leg-on-hold-hangs-up-another-leg-is-hanged-up-too… Sent from the freeswitch-users mailing list archive at Nabble.com.

3 3