July 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Cron-like execution in FS
by Matthew Fong 10 Feb '21

10 Feb '21

I'm wondering if there's any features that allow the cron-like execution of code inside of Freeswitch, preferably with lua--or if I am stuck using the api interface and running the cron outside of freeswitch. --matt

5 5

Re: [Freeswitch-users] stream a file multicast with mod_esf
by Sluschny, Thomas 10 May '18

10 May '18

Hi Brian, i thought if i can stream from portaudio it is almost the same with streaming from file, so it should working already now. Is this not the design idea of channels and media to do so? regards, thomas PS: sry for improper formatted mail, i cant reply at the moment and have to copy mail from archive :( ________________________________ >From brian at freeswitch.org Thu Feb 12 07:07:36 2009 From: brian at freeswitch.org (Brian West) Date: Thu, 12 Feb 2009 09:07:36 -0600 Subject: [Freeswitch-users] stream a file multicast with mod_esf Message-ID: <6F68FEDB-8976-44D4-9A67-F871EC7D5120(a)freeswitch.org <mailto:6F68FEDB-8976-44D4-9A67-F871EC7D5120@freeswitch.org> > esf is for multi cast paging... it currently won't let you play files... we would have to create a multicast playback application. /b On Feb 12, 2009, at 8:00 AM, Sluschny, Thomas wrote: > Hi, > > i want to stream a file per IP multicast with mod_esf. > > I can stream IP multicast with: > pa call stream XML > and in XML dialplan: > <extension name="stream"> > <condition field="destination_number" expression="^stream$"> > <action application="answer"/> > <action application="esf_page_group" data="224.168.168.168 34567"/> > <action application="esf_page_group" data=""/> > </condition> > </extension> > and i can also play files with 'playback' app, > > BUT: how can put these 2 things together? > > May be its trivial, but i cant get it make working with 'originate' > or 'uuid_broadcast' or 'bridge', 'transfer' and so on ... > > Thanks in advance, > Thomas

7 15

Dingaling In Component Mode "How To Call JingleTo SIP"
by Ali Jawad 11 Aug '14

11 Aug '14

Dear All This might be a duplicate post, I am sorry if it is. Normally I get direct feedback from the list. But this time I did not get any reply. So I was afraid it might not have been delivered. First I would like to state that dingaling is working in client mode with gtalk perfectly. I can call from gtalk to my sip extension "1000". I have setup component mode now I am using FS with Openfire, open does show the following: 1 fs.jabber2.mydomain.net LibDingaLing gateway However stats on the jabber server are Session Statistics: Packets Received/Sent: 1/1 So the component is REGISTERED, so far so good my problem now is how to initiate a call from XMPP to a SIP extension. Using client mode I would do the following: 1. Setup GTALK account and assign extension to it 2. Login with another gtalk account and dial the first gtalk account 3. The assigned extension rings I don't know how to do the same using component mode. Adding sip+1000@mydomain to the jabber client "Jabbin" does not popup an "add contact" on XTEN. Anything I missed here ? Thanks for any hints or suggestions The Freeswitch server logs are below: 2008-04-11 13:57:32 [NOTICE] libdingaling.c:1276 on_log() SEND: ------------------------------------------------------------------------ ------- <stream:stream xmlns:stream="http://etherx.jabber.org/streams" xmlns="jabber:component:accept" to="fs" version="1.0"></stream:stream> 2008-04-11 13:57:32 [INFO] libdingaling.c:1274 on_log() RECV: ------------------------------------------------------------------------ ------- <stream:stream xmlns:stream="http://etherx.jabber.org/streams" xmlns="jabber:component:accept" from="fs.jabber2.MyDomain" id="69fcaa7b"></stream:stream> 2008-04-11 13:57:32 [NOTICE] libdingaling.c:1276 on_log() SEND: ------------------------------------------------------------------------ ------- <handshake>72dac833190326bb82dddedae558b2b794df5e1b</handshake> 2008-04-11 13:57:32 [INFO] libdingaling.c:1274 on_log() RECV: ------------------------------------------------------------------------ ------- <handshake></handshake> 2008-04-11 13:57:32 [INFO] libdingaling.c:1274 on_log() RECV: ------------------------------------------------------------------------ ------- <iq type="get" id="970-504" from="component.jabber2.MyDomain" to="fs.jabber2.MyDomain"> <query xmlns="http://jabber.org/protocol/disco#info"></query> </iq> 2008-04-11 13:57:32 [NOTICE] libdingaling.c:1276 on_log() SEND: ------------------------------------------------------------------------ ------- <iq from="fs" to="component.jabber2.MyDomain" id="970-504" type="result"> <query xmlns="http://jabber.org/protocol/disco#info"> <identity category="gateway" name="LibDingaLing"></identity> <feature var="http://jabber.org/protocol/disco"></feature> <feature var="http://jabber.org/protocol/disco#info"></feature> <feature var="jabber:iq:version"></feature> <feature var="vcard-temp"></feature> <feature var="http://www.google.com/xmpp/protocol/voice/v1"></feature> <feature var="jabber:iq:last"></feature> </query> </iq>

4 8

Newbie's installation: Can't start FS at boot
by Dyna Guy 23 May '13

23 May '13

I am a newbie to FS and I want learn it. So I setup a Centos 5.2 (fresh install) and followed the instruction on the wiki installed the new Freeswitch v1.0.3. After the installation I can start FS by issus command "/usr/local/freeswitch/bin/freeswitch". After that I copied freeswitch.init.centos5 to /etc/init.d/freeswitch and chmod it to 755. Reboot the server and FS is not running. If I try the start up script: [root@localhost build]# /etc/init.d/freeswitch start Starting freeswitch: [ OK ] [root@localhost build]# /etc/init.d/freeswitch status freeswitch dead but subsys locked Did I miss somthing here? Please help. Thanks a lot. dynaguy Here is the copy of the origenal freeswitch.init.centos5 ---------------------------- [root@localhost ~]# cat /etc/init.d/freeswitch #!/bin/bash # # /etc/rc.d/init.d/freeswitch # # The FreeSwitch Open Source Voice Platform # # chkconfig: 345 89 14 # description: Starts and stops the freeswitch server daemon # processname: freeswitch # config: /usr/local/freeswitch/conf/freeswitch.conf # pidfile: /usr/local/freeswitch/log/freeswitch.pid # # Source function library. . /etc/init.d/functions PROG_NAME=freeswitch PID_FILE=${PID_FILE-/usr/local/freeswitch/log/freeswitch.pid} FS_USER=${FS_USER-freeswitch} FS_FILE=${FS_FILE-/usr/local/freeswitch/bin/freeswitch} FS_HOME=${FS_HOME-/usr/local/freeswitch} LOCK_FILE=/var/lock/subsys/freeswitch FREESWITCH_ARGS="-nc" RETVAL=0 # Source options file if [ -f /etc/sysconfig/freeswitch ]; then . /etc/sysconfig/freeswitch fi # <define any local shell functions used by the code that follows> start() { echo -n "Starting $PROG_NAME: " if [ -e $LOCK_FILE ]; then if [ -e $PID_FILE ] && [ -e /proc/`cat $PID_FILE` ]; then echo echo -n $"$PROG_NAME is already running."; failure $"$PROG_NAME is already running."; echo return 1 fi fi cd $FS_HOME daemon --user $FS_USER --pidfile $PID_FILE "$FS_FILE $FREESWITCH_ARGS $FREESWITCH_PARAMS >/dev/null 2>&1" echo RETVAL=$? [ $RETVAL -eq 0 ] && touch $LOCK_FILE; echo return $RETVAL } stop() { echo -n "Shutting down $PROG_NAME: " if [ ! -e $LOCK_FILE ]; then echo echo -n $"cannot stop $PROG_NAME: $PROG_NAME is not running." failure $"cannot stop $PROG_NAME: $PROG_NAME is not running." echo return 1; fi cd $FS_HOME $FS_FILE -stop > /dev/null 2>&1 killproc $PROG_NAME RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f $LOCK_FILE; return $RETVAL } rhstatus() { status $PROG_NAME; } case "$1" in start) start ;; stop) stop ;; status) status $PROG_NAME RETVAL=$? ;; restart) stop start ;; reload) # <cause the service configuration to be reread, either with # kill -HUP or by restarting the daemons, in a manner similar # to restart above> ;; condrestart) [ -f $PID_FILE ] && restart || : ;; *) echo "Usage: $PROG_NAME {start|stop|status|reload|restart}" exit 1 ;; esac exit $RETVAL

3 2

xmpp
by Peter P GMX 19 Oct '12

19 Oct '12

I saw that xmpp is supported in Fresswitch. See wiki: http://wiki.freeswitch.org/wiki/Mod_xmpp_event Has anybody already set this up? I have found no mod_xmpp neither in my mod directory nor in the source? There was also a question: " Q: Is it possible to send commands to fs via xmpp? Answer: Yes. " Anybody knows what can be done here and how to do this? Best regards Peter

4 3

mod_dingaling picking wrong IP address / no audio?
by Mark Campbell-Smith 14 Sep '12

14 Sep '12

Hi! I am trying to call from my corporate network (firewalled) using Gtalk to Freeswitch. I am not getting any audio. In the logs I see that mod_dingaling is using my internal corporate IP address which is not publically addressable. 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2932 1 candidates 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2960 candidates 146.xx.xx.xx:50320 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2993 Acceptable Candidate 146.xx.xx.xx:50320 Further on in the log, I can see GTalk sending a new candidate IP address to use: 2009-06-23 22:46:52.940486 [DEBUG] libdingaling.c:503 New Candidate 1 name=rtp type=local protocol=udp username=e+JTkVHT1xEkqXGD password=fAxU6Pr1oF9Zq48U address=192.168.1.102 port=50322 pref=1.00 2009-06-23 22:46:52.940486 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.940486 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] and 2009-06-23 22:46:52.957753 [DEBUG] libdingaling.c:503 New Candidate 2 name=rtp type=stun protocol=udp username=RBqyF2XNMYLfJNoU password=DQMjon1fSVoJIRTp address=124.xxx.xxx.xxx port=50323 pref=0.90 2009-06-23 22:46:52.957753 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.957753 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] and 2009-06-23 22:46:53.788341 [DEBUG] libdingaling.c:503 New Candidate 3 name=rtp type=relay protocol=udp username=62L5zs2FHbcUdeCJ password=KxmNgkUmZsLfuX6S address=209.xx.xxx.xxx port=19295 pref=0.50 2009-06-23 22:46:53.788341 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:53.788341 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] Because of this, I never get audio. Any ideas how to fix this? Thanks!

5 5

ESL problem
by Thangappan.M 31 Jul '12

31 Jul '12

Dear all, In the previous post, I got the information that using event outbound socket we can implement the IVR and also see the example in libs/esl/perl/server2.pl. I have seen it and understood the flow of the script.But when I was running that script it tells the following error. Can't locate loadable object for module ESL in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at ESL.pm line 11 Compilation failed in require at server2.pl line 1. Then I checked the 11th line in the ESL.pm that line is (bootstrap ESL;) But in perl directory there is no directory called ESL. What would be the issue?. Is ESL necessary is necessary for implementing IVR using event outbound socket? -- Regards, Thangappan.M

5 5

How to break a playback with loops
by Daniel Liang 24 Jun '12

24 Jun '12

Hi, I am trying to playing back a wav file a few times, and on receiving a dtmf event, it stops playing the file. The command I sent is: sendmsg call-command: execute execute-app-name: playback execute-app-arg: <the wav file> loops: 4 On receiving a dtmf event, I send a break command: sendmsg call-command: execute execute-app-name: break However, that only breaks one loop of the playback. And I have to press a dtmf for 4 times to stop the file. I tried sending 4 break commands all at once. But it didn't work. And even worse, my program stops receiving dtmfs anymore. My guess is that the first break stops the first loop, but before the second loop starts, the following 3 breaks stop something else that I don't know what they are. Any help is appreciated. Thanks. Daniel Liang

6 6

Grandstream GXP 2000
by Jonas Gauffin 18 Dec '11

18 Dec '11

Hello I have problems with TCP and GXP2000 phones. They work fine using UDP, but no calls arrive if I switch to TCP. I've upgraded to the latest GS firmware today to see it that helped, but it didn't. Have anyone else had problems with TCP? Regards, Jonas

5 8

Hardware phones that do 48Khz Celt: Was Re: Is there any license G729?
by Craig Askings 29 Sep '11

29 Sep '11

Are there any hardware phones that support 48 Khz Celt and automated/mass deployment? Craig. 2009/6/30 Jason White <jason(a)jasonjgw.net>: > Brian West <brian(a)freeswitch.org> wrote: >> Everyone has this need for lower bandwidth calls... I tend to march the >> other way. 48kHz baby! (btw you can do 48kHz in the same bandwidth as a >> single ulaw call) > > 48khz Celt (celt@48000 in your codec preferences) sounds wonderful with > FreeSWITCH. To test, run two FreeSWITCH instances, both with mod_portaudio. > This also works well in 48khz conferences. > > I wouldn't use G.729 even if it weren't encumbered by patents - it's G.711, > G.722, G.722.1 and (my current favourite) Celt all the way. > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > -- Craig Askings Network Engineer | Over the Wire Pty Ltd craig(a)overthewire.com.au | www.overthewire.com.au Phone: 07 3847 9292 | Fax: 07 3847 9696 | Mobile: 0404 019 365

12 24