- FreeSWITCH-users - FreeSWITCH Mailing Lists

Friday Free For All
by Ken Rice 14 Jun '13

14 Jun '13

Hey guys Don¹t forget the Friday Free For All today, Join us on 888 today! Pre-call we¹ll be listening in to the VUC Conference call. We¹ll kick off the FFA open bridge about 12 noon PST (or about 3 EST) officially but you can join at any time. We¹ll have some things to talk about at that time, but as always the bridge is open for business! Come out and join us! -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch

1 0

Inbound calls without registering
by Matt Broad 14 Jun '13

14 Jun '13

Hi, I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway. I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password? -- Thanks Matt This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.

3 6

configure fails to find libpq
by Claus Andersen 14 Jun '13

14 Jun '13

Hi, I am having trouble enabling pgsql support with the configure script and I will almost (boldly!) claim there might be a problem we the configure script. Autoconf and friends is however close to black magic and voodoo so I will try to assert my viewpoint and hopefully someone can point out my level of cluelessness :-) I am able to compile and run Freeswitch 1.2.8 (without core-pgsql), PostgreSQL 9.2.4 and OpenResty 1.2.8.5 (with libpq!). Openresty was configured with: ./configure --with-luajit --with-http_iconv_module --with-http_postgres_module --with-libpq=/usr/pgsql-9.2 Hence I know that I have a recent and working libpq. From previous mails on this list I can see that is the typical response to this issue is to install postgresql92-devel which I have already done. However freeswitch configure fails: $ ./configure --enable-core-pgsql-support <snip> checking for odbc header in /usr/include... found checking for SQLDisconnect in -lodbc... yes checking whether to include odbc... yes checking for SQLDisconnect in -lodbc... (cached) yes checking for pg_config... /usr/pgsql-9.2/bin/pg_config checking for PostgreSQL libraries... checking for PQgetvalue in -lpq... no configure: error: no usable libpq; please install PostgreSQL devel package or equivalent The part of configure which fails is: { $as_echo "$as_me:$LINENO: checking for PQgetvalue in -lpq" >&5 $as_echo_n "checking for PQgetvalue in -lpq... " >&6; } if test "${ac_cv_lib_pq_PQgetvalue+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpq $LIBS" I do simply not understand what "${ac_cv_lib_pq_PQgetvalue+set}" actually is doing and it becomes a dark art for me. If I remove the "if" clause I assume things would simply work (as LIBS should be correct)! My initial thought was to try to make an addition to configure to support the following options: --with-pgsql-lib=dir --with-pqsql-include=dir My OCD does however not like that I do not understand the test performed today. To blindly add those options would be too hackish (and stoopid). Can anyone explain what happens in the configure script? I would rather spend some time making sure configure works perfectly rather than tweaking my environment to match the expectations of the script. Kind Regards, Claus Andersen Additional info: Freeswitch 1.2.8 with PostgreSQL 9.2.4 uname -m = x86_64 uname -r = 2.6.32-358.6.1.el6.x86_64 uname -s = Linux uname -v = #1 SMP Tue Apr 23 19:29:00 UTC 2013 $ grep PQgetvalue /usr/pgsql-9.2/include/libpq-fe.h extern char *PQgetvalue(const PGresult *res, int tup_num, int field_num); $ pg_config (excerpt) INCLUDEDIR = /usr/pgsql-9.2/include LIBDIR = /usr/pgsql-9.2/lib LDFLAGS = -L/usr/lib64 -Wl,--as-needed LIBS = -lpgport -lxslt -lxml2 -lpam -lssl -lcrypto -lgssapi_krb5 -lz -lreadline -lcrypt -ldl -lm VERSION = PostgreSQL 9.2.4 $ tail config.log #define HAVE_ODBC 1 #define HAVE_LIBODBC 1 #define SWITCH_HAVE_PGSQL 1 #define POSTGRESQL_VERSION "9.2.4" #define POSTGRESQL_MAJOR_VERSION 9 #define POSTGRESQL_MINOR_VERSION 2 #define POSTGRESQL_PATCH_VERSION 4 configure: exit 1 $ rpm -ql postgresql92-devel | grep libpq /usr/pgsql-9.2/include/internal/libpq /usr/pgsql-9.2/include/internal/libpq-int.h /usr/pgsql-9.2/include/internal/libpq/pqcomm.h /usr/pgsql-9.2/include/libpq /usr/pgsql-9.2/include/libpq-events.h /usr/pgsql-9.2/include/libpq-fe.h /usr/pgsql-9.2/include/libpq/libpq-fs.h /usr/pgsql-9.2/include/server/libpq /usr/pgsql-9.2/include/server/libpq/auth.h /usr/pgsql-9.2/include/server/libpq/be-fsstubs.h /usr/pgsql-9.2/include/server/libpq/crypt.h /usr/pgsql-9.2/include/server/libpq/hba.h /usr/pgsql-9.2/include/server/libpq/ip.h /usr/pgsql-9.2/include/server/libpq/libpq-be.h /usr/pgsql-9.2/include/server/libpq/libpq-fs.h /usr/pgsql-9.2/include/server/libpq/libpq.h /usr/pgsql-9.2/include/server/libpq/md5.h /usr/pgsql-9.2/include/server/libpq/pqcomm.h /usr/pgsql-9.2/include/server/libpq/pqformat.h /usr/pgsql-9.2/include/server/libpq/pqsignal.h /usr/pgsql-9.2/lib/libpq.a /usr/pgsql-9.2/lib/libpq.so

2 10

Default configuration files
by Mike Hendrie 14 Jun '13

14 Jun '13

Is there a command I can use to reinstall the default configuration files? Mike

5 4

mod_conference background noise
by Alexander Haugg 14 Jun '13

14 Jun '13

Hi All, since yesterday i make some tests with the mod_conference and it works pretty good, but i have on all conference member phones a background noise. All configuration changes with the energy level, frame size (interval), volume of microphone or listening do no fix the problem. The conference member calls works with PCMA/8000 ptime 20. In the wireshark trace i can hearing, the background noise come from the FS to the HiPath 3000. You have any idea for correction options? Thanks

3 2

Error in my_thread_global_end(): 16 threads didn't exit
by Alex Lake 14 Jun '13

14 Jun '13

I think this error message is related to using odbc to access mysql inside lua, but I'm wondering if it's anything to get worried about, as the functionality seems ok. FWIW, I am using libmyodbc_r.so as the driver.

2 2

Conference and transcoding
by Oleg Stolyar 14 Jun '13

14 Jun '13

Hi guys, I understand that in a conference FS always performs transcoding to mix the multiple channels together even if all the users use the same codecs. My question is - is it also true for a conference with only two users or does FS detect a conference with only two users with the same codecs and optimize it to not transcode? Thank you *Oleg*

4 5

Voice change
by Muhammad Naseer Bhatti 13 Jun '13

13 Jun '13

Is there a way to change the voice of the caller in FreeSWITCH? Something like changing the tone of voice, adding extra echo, looping etc. Even if one would have to write a module, what should we look at? -- Thanks, Muhammad Naseer Bhatti

4 3

mod_lua - finding the file name
by Lloyd Aloysius 13 Jun '13

13 Jun '13

Hi All I have a main.lua file and couple of include files using dofile(). These include files have the functions. is there anyway to find the file name (Include File Name) when a function is executing from one of the include file. I noticed mod_lua do not include the debug library from lua? Any help is appreciated. Thank you. Lloyd

1 0

how to DISABLE events by class or all
by Vincent Xia 13 Jun '13

13 Jun '13

it's said at http://wiki.freeswitch.org/wiki/Mod_event_socket that "event" command is to Enable or disable events by class or all (plain or xml or json output format) usage is: event plain <list of events to log or all for all> but i didn't see any description on how to DISABLE events by class or all, how can this be done? (noevents will disable all events, but i just want to disable a certain type of events that had been previously subscribed.) BR

2 3