- FreeSWITCH-users - FreeSWITCH Mailing Lists

Frequent repeated debug information
by Ashish gautam 12 Jun '13

12 Jun '13

Hi, I am getting this repeated debug information much frequent than expected (almost twice a second) on console. Its showing T200 timer expired. What could be the issue. I have installed Digium 8 port PRI card and using it with mod-freetdm,dahdi,libpri stack. *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s3c16][3:78] Changing from state 5(Awaiting establishment) to 4(TEI assigned)* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s3c16][3:78] TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)* *2013-06-10 14:00:20.154765 [DEBUG] lpwrap_pri.c:367 [s7c16][7:202] pri timer 1 ms late* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] t200_expire* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] TEI: 0 State 5(Awaiting establishment)* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] V(A)=0, V(S)=0, V(R)=0* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] K=7, RC=3, l3_initiated=1, reject_except=0, ack_pend=0* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] T200_id=57344, N200=3, T203_id=0* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] SAPI/TEI=0/0 Starting link restart delay timer* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] Changing from state 5(Awaiting establishment) to 4(TEI assigned)* *2013-06-10 14:00:20.154765 [DEBUG] ftmod_libpri.c:133 [s7c16][7:202] TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)* -- Ashish Gautam Nucleus Microsystems (Pvt.) Ltd. Ph. 011 47574758

3 3

MOD_PYTHON Compile Problems
by derrick edwards 12 Jun '13

12 Jun '13

Hi, I continue to have problems compiling mod_python, even though FS and other modules compile and work fine with FreeBSD Current. When compiling mod_python I get the following error during configure. checking for python... /usr/local/bin/python checking python version... 2.7.5 checking for python distutils... yes checking location of site-packages... /usr/local/lib/python2.7/site-packages checking python libdir... /usr/local/lib checking for main in -lpython2.7... yes checking for PyThread_init_thread... no configure: error: Your python lacks threads support, can not build mod_python In the config.log this is noted. configure:23419: error: Your python lacks threads support, can not build mod_python Which refers to this check: if test "$python_has_threads" = "no"; then if test "$with_python" = "try"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your python lacks threads support, can not build mod_python" >&5 $as_echo "$as_me: WARNING: Your python lacks threads support, can not build mod_python" >&2;} else as_fn_error $? "Your python lacks threads support, can not build mod_python" "$LINENO" 5 I verified that my system python was compiled with thread support through the sysconfig module. CONFIG_ARGS '--with-threads' '--enable-unicode=ucs4' '--enable-ipv6' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd10.0' 'build_alias=amd64-portbld-freebsd10.0' 'CC=cc' 'CFLAGS=-O2 -pipe -fno-strict-aliasing' 'LDFLAGS= -pthread' 'CPPFLAGS=' 'CPP=cpp' For testing, I have edited the configure file so that it could complete that process however, I still can not build the actual module. I get the following error message: Compiling freeswitch_python.cpp... cc1plus: error: unrecognized command line option "-Wno-unused-result" gmake[1]: *** [freeswitch_python.o] Error 1 gmake: *** [all] Error 1 Which makes me think that this may be a compiler issue. I am using FreeBSD 10.0 and kern.compiler_version: FreeBSD clang version 3.3 (trunk 178860) 20130405. Attempting to use a different python version during the configure phase gives even weirder responses. checking for python... /usr/local/bin/python3.3 checking python version... 3.3.2 checking for python distutils... yes checking location of site-packages... /usr/local/lib/python3.3/site-packages checking python libdir... /usr/local/lib checking for main in -lpython3.3... no configure: error: python3.3 is unusable Any ideas on what the cause could be, or possible fix? Any help would be appreciated. Derrick

3 2

in a lua script, is "session" available only after "answer"?
by Vincent Xia 12 Jun '13

12 Jun '13

i have an extension in the dialplan\default.xml <extension name="test_lua" continue="false"> <condition field="destination_number" expression="^(9\d{3})$"> <action application="answer" /> <action application="lua" data="test.lua" /> <action application="sleep" data="1000" /> </condition> </extension> the test.lua is something like: if session:ready() then freeswitch.consoleLog("info", "a leg is ready.\n" ) else freeswitch.consoleLog("info", "a leg is not ready.\n" ) end this works fine and info "a leg is ready." will be shown on the console. when im trying to swap the sequence of the dialplan as <action application="lua" data="test.lua" /> <action application="answer" /> the freeswitch gets down, with a windows message box prompting to debug or close the program. (a bug?) does this mean in a lua script, "session" is only available after "answer"?

4 3

pickup endpoint - Break the Simultaneous Ring
by Lloyd Aloysius 12 Jun '13

12 Jun '13

Hello All The following break the Simultaneous Ring.User registered two different devices. Only one Device ring after add the *,pickup/dave(a)alcan.mydomain.ca * *bridge_data: * {sip_invite_domain=alcan.mydomain.ca ,ignore_early_media=true,force_transfer_context=alcan.mydomain.ca }[leg_timeout=20]user/dave@alcan.mydomain.ca*,pickup/dave@alcan.mydomain.ca* Thanks LLoyd * <http://www.sunteltech.ca/blog/>*

3 3

Setting custom presence/BLF
by Kelly McDonald 12 Jun '13

12 Jun '13

François, The answer to your question (dated Apr 13 2013) is yes: I'm hoping that this matches up with your earlier post so that others can find it (I'm new to the Freeswitch mailing list, so I couldn't just reply to the message.) With the help of Allamamond here on the list, I was able to do the following: telnet localhost 8021 > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > Content-Type: auth/request > auth ClueCon > Content-Type: command/reply > Reply-Text: +OK accepted > sendevent PRESENCE_IN proto: sip from: 6001(a)192.168.1.99 login: 6001(a)192.168.1.99 event_type: presence alt_event_type: dialog event_count: 1 unique-id: kpmtest1 Presence-Call-Direction: outbound Answer-State: early > Content-Type: command/reply > Reply-Text: +OK a4e12f2a-d2c3-11e2-9598-1170e5c1ad37 Unique-id should most likely be . . . um - unique (although it worked fine for me when it wasn't) And I tried a virtual id for the from and login. For example"kpmtest(a)192.168.1.99" worked fine. On the phone (yealink) I just used "6001" or "kpmtest" in the BLF without the trailing domain. Answer-State could also be "confirmed" or "terminated" Finally, this was working with 1.2 Freeswitch. HTH Kelly

1 0

Re: [Freeswitch-users] Sending NOTIFY with perl ESL
by Kelly McDonald 12 Jun '13

12 Jun '13

Just to follow up on an email from Jun 24 2012: Vallamamod was trying to set BLF fields from ESL, and hadn't quite got it - I was having the same problems, so I PM'd him to see if he had figured it out and he had. Based on the code that he sent me, I was successfully able to alter the BLF on a Yealink phone. here is my raw text from a ESL session using telnet (well- almost raw, - I prefixed all responses from freeswitch or telnet with a >) telnet localhost 8021 >Trying 127.0.0.1... >Connected to localhost. >Escape character is '^]'. >Content-Type: auth/request > auth ClueCon >Content-Type: command/reply >Reply-Text: +OK accepted > sendevent PRESENCE_IN proto: sip from: 6001(a)192.168.1.99 login: 6001(a)192.168.1.99 event_type: presence alt_event_type: dialog event_count: 1 unique-id: kpmtest1 Presence-Call-Direction: outbound Answer-State: early >Content-Type: command/reply >Reply-Text: +OK a4e12f2a-d2c3-11e2-9598-1170e5c1ad37 ----------------------------------------------------- This changed the light - For Answer-State you can also use confirmed and terminated Thanks to Vallimamod for his help. Kelly

1 0

Re: [Freeswitch-users] Unable to get K3765 dongle signalling using mod_gsmopen
by Silviu CHINGARU 11 Jun '13

11 Jun '13

Thank you for your reply. Can you give me a small example of usage of minicom with dongles? Baud rate, etc... Should I call only from minicom via AT commands sent to interface or use freeswitch to init the call and only sniff the interface with minicom. Sorry if is noob question but I never tryed those low level commands. -- Best regards, Fiftyz -------- Original message -------- From: Dmitry Lysenko <dvl36.ripe.nick(a)gmail.com> Date: 12/06/2013 00:01 (GMT+02:00) To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> Subject: Re: [Freeswitch-users] Unable to get K3765 dongle signalling using mod_gsmopen Hi! > I think the serial interface is ok because I can send AT commands to init the call but I don't get any signaling. You should try other ttyUSBx. One of ttyUSBx used for commands only, but another for commands AND signalling too. You can open ttyUSBx with minicom and make call to number of SIM card inserted to modem. If you will see RING you will find "right" serial port. Best wishes, Dmitry. 2013/6/11 Silviu CHINGARU <silviuchingaru(a)gmail.com> Hi, I'm trying to make mod_gsmopen work with my testing freeswitch. I have the following setup: K3765 Huawei dongle Freeswitch 1.2.9 with mod_gsmopen I setup a gateway using gsmopen.conf.xml (see attached) and an extension in dialplan. I've set consolelog 9 and I'm able to make call via mod_gsmopen from any switch phone, but the signaling is not working. So when I answer to mobile called by gsmopen module, sip phone is still displaying "Conecting...", I can talk to mobile phone via sip phone and reverse but when I close the conversation from mobile side is still "Conecting...". In console I don't see any signaling from gsmopen like ringing, answered and so on. I think the serial interface is ok because I can send AT commands to init the call but I don't get any signaling. Also the audio interface is ok because I have audio both sides (via Early Media because the call is never signaled as answered). I've attached: - reload.log (output from freeswitch when I type reload mod_gsmopen) - call.log (output from freeswitch when I init the call via mod_gsmopen) - gsmopen.conf.xml (I've changed / masked context, ip and phone number for privacy) I've used this dongle also with chan_dongle in asterisk and was working fine but on freeswitch I'm unable to configure it. Please help, I don't even know what to read! What could be the problem, what is wrong? How can I figure out what is wrong? Thank you very much for your time! Best regards, Fiftyz _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

2 2

USSD support for mod_gsmopen
by Yuriy Ostapchuk 11 Jun '13

11 Jun '13

Hi, I've submitted a patch that implements USSD messaging support. (useful for checking and refilling account balance and other provider-specific usage) Here is the JIRA ticket: http://jira.freeswitch.org/browse/FS-5078 If this feature is considered useful, I would appreciate if it's integrated in git. Thanks, Yuriy

5 4

SIP-S and openssl
by mehroz 11 Jun '13

11 Jun '13

Hi all, The question is beyond the SIP SSL/TLS support, everything working perfectly fine with creating keys/certs, generating agent.pem and client with cafile.pem. I am looking for a way to use different Ciphers for encryption/decryption before keys get involved. I dont know if freeswitch could directly or indirectly help to acquire the desired results, but since FS is using openssl at TLS layer, it might have a link ! Ciphers are being traced out in wireshark packets and i can see ClientHello, sending some particular cipher, and Server respond with serverHello, deciding the Cipher from preferences... However, changing the Cipher from client creates issues at server end and normally, "Handshake failures" are returned, even though those offered ciphers are supported by Server. Please comments if any body have previously worked or dev guys could help so? -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/SIP-S-and-openssl-tp7591496.h… Sent from the freeswitch-users mailing list archive at Nabble.com.

2 4

mod_callcenter doesn't play very nicely with mod_xml_curl
by Cal Leeming [Simplicity Media Ltd] 11 Jun '13

11 Jun '13

Hello, Having a few issues with mod_callcenter and mod_xml_curl. If anyone would like to take a look, please feel free; http://jira.freeswitch.org/browse/FS-5504 Any thoughts/comments would be very much appreciated. Thanks Cal

2 1