- FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] Mod-managed c# cdr
by Andre Demattia 15 Jun '13

15 Jun '13

-----Original Message----- From: "Andre Demattia" <andretodd(a)verizon.net> Sent: ‎6/‎15/‎2013 9:33 AM To: "freeswitch-users(a)lists.freeswitch.org" <freeswitch-users(a)lists.freeswitch.org> Subject: Mod-managed c# cdr Hi I'm trying to figure out how to capture the CDR in c# after the call is ended. I see there's a on hangup_complete event. But I'm not sure how to connect that with the session to call session.getxmlcdr() Thanks Andre

1 0

having problem testing FS with WinSIP
by Vincent Xia 15 Jun '13

15 Jun '13

i was trying to test FS with 1 calling party and 1 called party configured in 2 WinSIPs, the registration to FS is OK for both party, but while making calls, the calling party kept receiving 407 Proxy Authentication Required response, i tried to uncomment <param name="accept-blind-reg" value="true"/> <param name="accept-blind-auth" value="true"/> in internal.xml of sip_profiles and still receiving 407 response. the FS log keeps on displaying the following DEBUG: 2013-06-14 18:54:42.166920 [DEBUG] switch_core_session.c:1005 Send signal sofia/internal/1500@192.168.0.100:15070 [BREAK] 2013-06-14 18:54:42.166920 [DEBUG] switch_core_session.c:1005 Send signal sofia/internal/1500@192.168.0.100:15070 [BREAK] 2013-06-14 18:54:42.187428 [DEBUG] sofia.c:7860 IP 192.168.0.100 Rejected by acl "domains". Falling back to Digest auth. 2013-06-14 18:54:42.187428 [DEBUG] switch_core_session.c:1005 Send signal sofia/internal/1500@192.168.0.100:15070 [BREAK] 2013-06-14 18:54:42.187428 [DEBUG] sofia.c:1787 detaching session c301db43-84d7-4b44-8ef1-8369bbf9f476 2013-06-14 18:54:42.187428 [DEBUG] sofia.c:1879 Re-attaching to session c301db43-84d7-4b44-8ef1-8369bbf9f476 2013-06-14 18:54:42.187428 [DEBUG] switch_core_session.c:1005 Send signal sofia/internal/1500@192.168.0.100:15070 [BREAK] 2013-06-14 18:54:42.187428 [DEBUG] switch_core_session.c:1005 Send signal sofia/internal/1500@192.168.0.100:15070 [BREAK] 2013-06-14 18:54:42.206960 [DEBUG] sofia.c:7860 IP 192.168.0.100 Rejected by acl "domains". Falling back to Digest auth. 2013-06-14 18:54:42.206960 [DEBUG] switch_core_session.c:1005 Send signal sofia/internal/1500@192.168.0.100:15070 [BREAK] 2013-06-14 18:54:42.206960 [DEBUG] sofia.c:1787 detaching session c301db43-84d7-4b44-8ef1-8369bbf9f476 2013-06-14 18:54:42.206960 [DEBUG] sofia.c:1879 Re-attaching to session c301db43-84d7-4b44-8ef1-8369bbf9f476 My question is how can i disable FS from asking 407 and/or make the call through? BR

4 5

Mod-managed c# cdr
by Andre Demattia 15 Jun '13

15 Jun '13

Hi I'm trying to figure out how to capture the CDR in c# after the call is ended. I see there's a on hangup_complete event. But I'm not sure how to connect that with the session to call session.getxmlcdr() Thanks Andre

1 0

SIP web client recommendations
by Matthew Cordes 15 Jun '13

15 Jun '13

Hello, Could anyone recommend a SIP web client (either using flash or Java applets) that they found worked particularly well with FreeSwitch. I've tried a few of them with mixed results. http://phono.com is the best one I've tried, but one of my requirements is that the client (and media server if needs one like flash) be deployable inside my company's intranet w/o access to the internet. This rules out all of the cloud based solutions sadly. I'm also playing with WebRTC but I don't think that's mature enough for my immediate needs. I'm not biased against a commercial solution. -Matt

4 3

FreeSWITCH crashed on signal 11
by Ashish gautam 15 Jun '13

15 Jun '13

Hi, I have an FS machine running on FreeBSD system with Digium 8-span PRI card. PRI line is plugged only on span 1. Everything was running fine until all the channels got alarms suddenly and mod_ftdm attempted to restart them. But while restarting FS crashed. /var/log/messages show: *Jun 14 12:36:03 ivrfr kernel: pid 759 (freeswitch), uid 0: exited on signal 11 (core dumped)* * * I am attaching the messages file herewith. Please throw some light on what might have happened. -- Ashish Gautam Nucleus Microsystems (Pvt.) Ltd. Ph. 011 47574758

5 11

Re: [Freeswitch-users] configure fails to find libpq
by kellon.langdon＠sis-grenada.com 15 Jun '13

15 Jun '13

Hi Claus / Steven I have also bee having problems with freeswitch find libpq. I have tried with version 1.2.10 down to 1.2.7. what i've found on my system Platform CentOS 6.4 Postgresql 9.2 using the following configure options ./configure --enable-core-pgsql-support LDFLAGS="-L/usr/pgsql-9.2/lib" CPPFLAGS="-I/usr/pgsql-9.2/include" freeswitch no longer complains about not finding lpg. Another error is thrown out. This new problem is to do with mod_xml_scgi which seems to be an old bug and the problem I'm having currently. Try the options given above and see. I suspect you only need the --enable-core-pgsql-support. Kellon From: Claus Andersen <clan(a)wheel.dk> Date: 06/14/13 12:07Subject: Re: [Freeswitch-users] configure fails to find libpq On Fri, 14 Jun 2013, Steven Ayre wrote: > Adding this line immediately before AC_CHECK_LIB, bootstrap.sh again, and then try configure. > LDFLAGS="$LDFLAGS `$PG_CONFIG --libdir`" > > It's a possible workaround rather than an actual fix (and an ugly one at that since it then keeps that lib > directory for the rest of the script). One I haven't actually tested since libpq-dev on my system (Debian) > installs to /usr/lib so doesn't have your issue. So let us know how you get on with it. > > If detected POSTGRESQL_LDFLAGS is already set containing the correct path so if that's what gets used by the > build it might not be a problem past the configure stage. I assume that the following has the same effect: $ LDFLAGS="${LDFLAGS} -L/usr/pgsql-9.2/lib" $ export LDFLAGS $./configure --enable-core-pgsql-support This fails during make and I have written a sperate mail to that effect. I will try your suggestion as well. Would the proper procedure be to file a new bug or should the make error be filed as a seperate (but related) bug? Kind Regards, Claus Andersen

2 1

Record calls on FusionPBX
by Cesar Bermudez 14 Jun '13

14 Jun '13

Hi all I know maybe this is not the best place to answer, but playing with FusionPBX , and trying to configure to replace a asterisk install i dint see a option to record all outbound calls, or record some extensions the inbound/outbound calls, but maybe some of the guys here knows how do that. Regards.

2 1

Anyone able to get freeswitch to register a gateway over TLS or TCP? I can't get it to not send UDP packets for reg.
by Mitch Capper 14 Jun '13

14 Jun '13

I am trying to get freeswitch to register with another freeswitch server (on TLS port 5061) however default the config settings I believe should set it, it always trys to register over UDP (after registration or with registration set to false however it does send TCP then for outbound calls). If anyone has a gateway config that actually registers over TCP or TLS that would be great. The client gateway/profile config at: http://pastebin.freeswitch.org/15383is what i believe should work but isn't I have tried setting contact-params on the gateway to tport=tls tport=tcp tport=tcp;transport=tls and transport=tls without any luck. Anyway even TCP would be helpful as it would allow me to trace better how the sip registration decides to use TCP or UDP. I tried digging into libsofia but its a bit hard to trace and understand with its generic event structure and tagging (plus the documentation isn't the most rebust on registration options). Thanks ~Mitch

3 4

Kamailio+Freeswitch SBC
by Camila Troncoso 14 Jun '13

14 Jun '13

Hi all, I’m working for a while with Kamailio+Freeswitch as SBC. I have this structure: * * * * * * * * * * * * * * * * When I make a call, from one client coneccted to LCR, it is route to my SBC and afterwards to his destiny in the cloud passing thourgh a gateway. When the destiny is unreachable, the LCR reroutes the call to another gateway. Sometimes the LCR send this retry again to the SBC , becouse the second gateway is also in the cloud, but when this happens, Fresswitch answer with : “482 Request merged”. Is there a way to solve this? Regards, * * *Camila Troncoso **|* Ingeniero de Desarrollo RedVoiss *|*ctroncoso(a)redvoiss.net Santiago - Chile *|* +56 2 2408535 www.redvoiss.net

2 5

Freeswitch+ Skypopen concurrent calls.
by Pankaj Belsare 14 Jun '13

14 Jun '13

Hi Giovanni, I have a freeswitch configured with skypopen with multiple skype clients as per the wiki pages<http://wiki.freeswitch.org/wiki/Skypopen#Running_multiple_instances_of_the_…> at the time when i implimented it, concurrent calls were working fine, but today i observed while my regular sanity checks that the concurrent calls are not longer getting through for the same skype user id, the calls were landing into voice mail of skype (although the voicemail feature for skype account was enabled since beginning the concurrent calls were working fine then.) I am not able to find any clue why suddenly concurrent calls with the same skype usrename stopped working, is it some thing to do with the skype network? Please help. Thanks Pankaj

2 1