- FreeSWITCH-users - FreeSWITCH Mailing Lists

Freeswitch/SIP to Avaya CM
by John Doe 19 Jun '13

19 Jun '13

Does anyone have the configuration settings for creating a sip trunk back to an Avaya CM 5.2?

1 0

Add IP to ACL from the CLI
by Tom Carlson 19 Jun '13

19 Jun '13

I have two freeswitch servers that I am linking together, so that I need to add the IP of each box to the ACL of the other box. However, one of these servers has a dynamic IP from the internet service provider. I have a cron job running that determines the IP address of the dynamic box, every 5 minutes, and if it changes, writes that IP address to the domain name server, so that registration, etc. to the domain name always works, since the domain name always points to the current IP address.. However, Freeswitch does not accept domain names in the ACL. It only accepts IP addresses. That means I need to change acl.conf.xml, every time the ip address changes. I would rather just execute a command using fscli to add the IP address do the ACL. Is this possible?

1 0

FreeSWITCH Community Conference Call - ClueCon 2013 Schedule!
by Michael Collins 19 Jun '13

19 Jun '13

Hello all! This is a reminder that we will be releasing the ClueCon 2013<http://www.cluecon.com>schedule on today's community conference call <http://wiki.freeswitch.org/wiki/FS_weekly_2013_06_19>. We also have the whole FreeSWITCH core development team joining us today. The call starts at 1PM Eastern, 10AM Pacific. We look forward to having a large crowd and some stimulating conversation on today's call! -- Michael S Collins ClueCon Team http://www.cluecon.com 877-7-4ACLUE

2 1

Call dropping while using TLS in freeswitch
by Richa Richa 19 Jun '13

19 Jun '13

Hi All, I am new to freeswitch. And I want to secure my calls using TLS. I have two Aastra 6753i phones registered as Transport Protocol setting "UDP and TCP". When I try to call one extension from another. It rings a little, then got disconnected. Freeswitch log at: http://pastebin.freeswitch.org/21077 Regards, Richa.

1 1

Re: [Freeswitch-users] tls SIP Trunk in Freeswitch
by mehroz 19 Jun '13

19 Jun '13

It looks as if , it does not decrypt itself over the 2nd server. The encrypted SIP message must decrypt on the other end, to understand what it is about. I am also confused , which certs and from which server need to be imported to the other server. Either cafile.pem of FS1 has to go to FS2, or cafile.pem of FS2 has to move over FS1. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/tls-SIP-Trunk-in-Freeswitch-t… Sent from the freeswitch-users mailing list archive at Nabble.com.

3 2

CHANGED Skype gw to Weekly Conference Call
by Giovanni Maruzzelli 19 Jun '13

19 Jun '13

Hey FreeSWITCHers, while I was testing performance related innovation I invalidated by mistake the Skype account you called to connect to the Weekly Call. So, the "skypiax5" account you used to call is no more. Please call skype "freeswitch_conf_call" to be automatically connected to the Weekly Call. Sorry for the inconvenience, -giovanni -- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618

1 0

Best practice for centralized user registration database
by Emrah 19 Jun '13

19 Jun '13

Hi all, What is the best practice today to handle users directory dynamically through a database, ideally PostgreSQL or MySQL? I'm kind of concerned by what I've seen so far in the available documentation. Do I really have to write an API to serve data from a DB to FreeSwitch? How about monitoring registration states? My goal is simple. I would like to have multiple FS instances share the same users directory and be able to tell on which server the client has registered. Your help would be greatly appreciated. Thanks, E

5 11

having problem build 1.2.10 stable with VS2010
by Vincent Xia 19 Jun '13

19 Jun '13

i downloaded the FS 1.2.10 stable tarball and was trying to build it in VS2010, after several attempts to "build all", the libeay32 still cannot be built, resulting fail of other dependencies includeing FreeSwitchCore, VS was reporting “netinet/sctp.h”: No such file or directory then i added preprocess definitions OPENSSL_NO_SCTP and OPENSSL_NO_EC_NISTP_64_GCC_128, now it reports several unresolved external symbols, as BUF_memdup, BUF_strdup, BUF_strlcat, Camellia_set_key, EC_POINT_point2oct, RSA_flags, etc. so do i still missed any external libs or something was wrong with my settings?

2 3

tls SIP Trunk in Freeswitch
by Abdullah 19 Jun '13

19 Jun '13

hi ,all please help me how to configure SIP (Tls) TRUNK in free-switch SIP Server. any idea. thanks in advance -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/tls-SIP-Trunk-in-Freeswitch-t… Sent from the freeswitch-users mailing list archive at Nabble.com.

2 2

freeswitch suddenly very slow
by devel＠omninet.eu 19 Jun '13

19 Jun '13

Hello, I am facing a very strange problem: my fs server suddenly performs very very slow. Here a description of the system: Debian 7, odbc, mysql is on another server, xml_curl for the users Suddenly the server stops responding to registration requests or answers with a very big delay. Sometimes I see there a message “503 System Busy”. When this behavior starts, the active calls can continue, without any issue. The problem is with new requests of any type. Once, during this phase, I’ve tried to start manually (cli) the watchdog. It crashed the fs session immediately. I thought I found the problem and next time I started the watchdog while the system was running well. The watchdog did not recognize the problem when fs was running again very slow. Sofia siptrace shows the registration attempts. Almost no answers are shown. Tracing on the network side shows the registration attempts arriving, but usually there is no response from the server. No other activity towards mysql. Restarting freeswitch can solve the problem for a few minutes, sometimes for several hours, but it suddenly happens again. Lately, even after the restart the speed is not coming back to normal. This happened also during the night, with almost no calls and only registration requests coming in. In the morning there was no user registered. We restarted fs and the registrations started over. I’ve tried to restart also Apache, MySQL, without noticing any difference. Also a reboot of the server did not help. A workaround now is to increase the re-registration timer for the registration. Now I can see that sometimes the response to the registration attempt is immediately, sometimes there is a bigger delay, but enough for the client to stay registered. With some clients the registration has a bigger delay and they get un-registered. It looks like suddenly we have a bottleneck, but I can’t find it. I forgot to mention, that the server hardware has plenty of resources (24 GB RAM, 4 cores, cpu running very low). In the past I have seen similar behavior, when we had some attacks from “bad guys”, trying to place a lot of calls at the same time… We can’t see such an attack now. Does anybody have an idea into which direction to continue investigating? Thank you A

2 1