Hi, I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway. I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password? -- Thanks Matt This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
By default the external profile is on port 5080 --calls to that profile don't require authentication, and get sent to the public context. -Avi On Jun 14, 2013 2:12 PM, "Matt Broad" <matt@inveroak.com> wrote:
Hi,
I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway.
I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password?
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
thanks for the quick response Avi. I have set up a test account with the provider and have set a number to be directed to me without authentication. I see the call coming in but get the output: [WARNING] sofia_reg.c:2503 Can't find user [trunk1@ipaddress] You must define a domain called 'ipaddress' in your directory and add a user with the id="trunk1" attribute and you must configure your device to use the proper domain in it's authentication credentials. (trunk1 and ipaddress are masks for the actual values). Thanks Matt On 14 June 2013 12:47, Avi Marcus <avi@avimarcus.net> wrote:
By default the external profile is on port 5080 --calls to that profile don't require authentication, and get sent to the public context.
-Avi On Jun 14, 2013 2:12 PM, "Matt Broad" <matt@inveroak.com> wrote:
Hi,
I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway.
I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password?
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
Hi, after taking a look it does seem that the calls are coming in on port 5060 which uses the internal context. If I have the provider send the traffic to port 5080, does this mean I just need to set up a dialplan in the public folder? And if so is there anything I should be aware of in regards to security? thanks Matt On 14 June 2013 14:04, Matt Broad <matt@inveroak.com> wrote:
thanks for the quick response Avi. I have set up a test account with the provider and have set a number to be directed to me without authentication.
I see the call coming in but get the output:
[WARNING] sofia_reg.c:2503 Can't find user [trunk1@ipaddress] You must define a domain called 'ipaddress' in your directory and add a user with the id="trunk1" attribute and you must configure your device to use the proper domain in it's authentication credentials.
(trunk1 and ipaddress are masks for the actual values).
Thanks Matt
On 14 June 2013 12:47, Avi Marcus <avi@avimarcus.net> wrote:
By default the external profile is on port 5080 --calls to that profile don't require authentication, and get sent to the public context.
-Avi On Jun 14, 2013 2:12 PM, "Matt Broad" <matt@inveroak.com> wrote:
Hi,
I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway.
I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password?
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
-- Thanks Matt This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
There are hundreds, if not thousands, of ways your FS instance can become compromised and vulnerable to toll fraud (or even remote execution, depending on what you put in your config!). I'd personally advice not leaving your 5080 open to the wide internet, consider putting it behind a firewall and allow only your providers to contact 5080, and if possible, block 5060 as well (if you know the IPs/CIDRs your phones are connecting in from). You can also use acl.conf to manage these restrictions, but if you are knew to FS then it's very easy to get this wrong. Others may argue that using a firewall is overkill, and in some ways complicates your deployment, but if you are new to FS then it's better to be safe than sorry. If you haven't done so already, start having a look though the FS wiki [1], and the examples provided in the FS repo [2] [3]. Hope this helps! Cal [1] http://wiki.freeswitch.org/<http://wiki.freeswitch.org/wiki/Default_config> [2] http://wiki.freeswitch.org/wiki/Default_config [3] https://github.com/FreeSWITCH/FreeSWITCH/tree/master/conf/vanilla On Fri, Jun 14, 2013 at 2:15 PM, Matt Broad <matt@inveroak.com> wrote:
Hi,
after taking a look it does seem that the calls are coming in on port 5060 which uses the internal context.
If I have the provider send the traffic to port 5080, does this mean I just need to set up a dialplan in the public folder? And if so is there anything I should be aware of in regards to security?
thanks Matt
On 14 June 2013 14:04, Matt Broad <matt@inveroak.com> wrote:
thanks for the quick response Avi. I have set up a test account with the provider and have set a number to be directed to me without authentication.
I see the call coming in but get the output:
[WARNING] sofia_reg.c:2503 Can't find user [trunk1@ipaddress] You must define a domain called 'ipaddress' in your directory and add a user with the id="trunk1" attribute and you must configure your device to use the proper domain in it's authentication credentials.
(trunk1 and ipaddress are masks for the actual values).
Thanks Matt
On 14 June 2013 12:47, Avi Marcus <avi@avimarcus.net> wrote:
By default the external profile is on port 5080 --calls to that profile don't require authentication, and get sent to the public context.
-Avi On Jun 14, 2013 2:12 PM, "Matt Broad" <matt@inveroak.com> wrote:
Hi,
I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway.
I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password?
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks for the suggestions Cal. I do already have firewall settings in place on all ports so should be nice and secure from that point :) I was thinking (and should probably be more clear) more about the toll fraud side of things, but I guess if I keep the public context well away from the default there should be no cross over. thanks Matt On 14 June 2013 14:37, Cal Leeming [Simplicity Media Ltd] < cal.leeming@simplicitymedialtd.co.uk> wrote:
There are hundreds, if not thousands, of ways your FS instance can become compromised and vulnerable to toll fraud (or even remote execution, depending on what you put in your config!).
I'd personally advice not leaving your 5080 open to the wide internet, consider putting it behind a firewall and allow only your providers to contact 5080, and if possible, block 5060 as well (if you know the IPs/CIDRs your phones are connecting in from). You can also use acl.conf to manage these restrictions, but if you are knew to FS then it's very easy to get this wrong.
Others may argue that using a firewall is overkill, and in some ways complicates your deployment, but if you are new to FS then it's better to be safe than sorry.
If you haven't done so already, start having a look though the FS wiki [1], and the examples provided in the FS repo [2] [3].
Hope this helps!
Cal
[1] http://wiki.freeswitch.org/<http://wiki.freeswitch.org/wiki/Default_config> [2] http://wiki.freeswitch.org/wiki/Default_config [3] https://github.com/FreeSWITCH/FreeSWITCH/tree/master/conf/vanilla
On Fri, Jun 14, 2013 at 2:15 PM, Matt Broad <matt@inveroak.com> wrote:
Hi,
after taking a look it does seem that the calls are coming in on port 5060 which uses the internal context.
If I have the provider send the traffic to port 5080, does this mean I just need to set up a dialplan in the public folder? And if so is there anything I should be aware of in regards to security?
thanks Matt
On 14 June 2013 14:04, Matt Broad <matt@inveroak.com> wrote:
thanks for the quick response Avi. I have set up a test account with the provider and have set a number to be directed to me without authentication.
I see the call coming in but get the output:
[WARNING] sofia_reg.c:2503 Can't find user [trunk1@ipaddress] You must define a domain called 'ipaddress' in your directory and add a user with the id="trunk1" attribute and you must configure your device to use the proper domain in it's authentication credentials.
(trunk1 and ipaddress are masks for the actual values).
Thanks Matt
On 14 June 2013 12:47, Avi Marcus <avi@avimarcus.net> wrote:
By default the external profile is on port 5080 --calls to that profile don't require authentication, and get sent to the public context.
-Avi On Jun 14, 2013 2:12 PM, "Matt Broad" <matt@inveroak.com> wrote:
Hi,
I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway.
I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password?
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
Indeed. There's more risk exposing SIP accounts to the all IPs (they can be hacked/brute forced) than a straightforward public context. As far as I can tell, you can set up the public context to be impervious to toll calls.... you might get some CDR spam, though. -Avi On Fri, Jun 14, 2013 at 4:49 PM, Matt Broad <matt@inveroak.com> wrote:
Thanks for the suggestions Cal. I do already have firewall settings in place on all ports so should be nice and secure from that point :) I was thinking (and should probably be more clear) more about the toll fraud side of things, but I guess if I keep the public context well away from the default there should be no cross over.
thanks Matt
On 14 June 2013 14:37, Cal Leeming [Simplicity Media Ltd] < cal.leeming@simplicitymedialtd.co.uk> wrote:
There are hundreds, if not thousands, of ways your FS instance can become compromised and vulnerable to toll fraud (or even remote execution, depending on what you put in your config!).
I'd personally advice not leaving your 5080 open to the wide internet, consider putting it behind a firewall and allow only your providers to contact 5080, and if possible, block 5060 as well (if you know the IPs/CIDRs your phones are connecting in from). You can also use acl.conf to manage these restrictions, but if you are knew to FS then it's very easy to get this wrong.
Others may argue that using a firewall is overkill, and in some ways complicates your deployment, but if you are new to FS then it's better to be safe than sorry.
If you haven't done so already, start having a look though the FS wiki [1], and the examples provided in the FS repo [2] [3].
Hope this helps!
Cal
[1] http://wiki.freeswitch.org/<http://wiki.freeswitch.org/wiki/Default_config> [2] http://wiki.freeswitch.org/wiki/Default_config [3] https://github.com/FreeSWITCH/FreeSWITCH/tree/master/conf/vanilla
On Fri, Jun 14, 2013 at 2:15 PM, Matt Broad <matt@inveroak.com> wrote:
Hi,
after taking a look it does seem that the calls are coming in on port 5060 which uses the internal context.
If I have the provider send the traffic to port 5080, does this mean I just need to set up a dialplan in the public folder? And if so is there anything I should be aware of in regards to security?
thanks Matt
On 14 June 2013 14:04, Matt Broad <matt@inveroak.com> wrote:
thanks for the quick response Avi. I have set up a test account with the provider and have set a number to be directed to me without authentication.
I see the call coming in but get the output:
[WARNING] sofia_reg.c:2503 Can't find user [trunk1@ipaddress] You must define a domain called 'ipaddress' in your directory and add a user with the id="trunk1" attribute and you must configure your device to use the proper domain in it's authentication credentials.
(trunk1 and ipaddress are masks for the actual values).
Thanks Matt
On 14 June 2013 12:47, Avi Marcus <avi@avimarcus.net> wrote:
By default the external profile is on port 5080 --calls to that profile don't require authentication, and get sent to the public context.
-Avi On Jun 14, 2013 2:12 PM, "Matt Broad" <matt@inveroak.com> wrote:
Hi,
I have a Freeswitch server up and running and am able to make and receive calls via my VOIP provider. I have it set up that my Freeswitch registers to the provider and then I receive/make calls via that gateway.
I now have a new provider that will be providing just inbound calls. They have informed me that I do not need to register with them they will just send the calls to my IP address. My question is how do I configure Freeswitch to allow calls from an IP address? I assume I need to setup an external SIP profile, but does this not require a username and password?
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Thanks Matt
This email and any attachments to it are confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of InverOak Limited.
If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error.
This email including any attachments cannot be guaranteed to be 100% secure or error-free as information could be intercepted, corrupted, lost, destroyed, out-dated, or containing viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission.
InverOak Limited is a company registered in England & Wales under company number 04529594, whose registered address is Old Barn house, 2 Wannions Close, Botley, Chesham, Buckinghamshire, HP5 1YA, United Kingdom.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Avi Marcus
-
Cal Leeming [Simplicity Media Ltd]
-
Matt Broad