October 2014 - FreeSWITCH-users - FreeSWITCH Mailing Lists

mod_conference / OPUS / 100 participants -> Bad Quality
by martin.hoole＠emailn.de 24 Oct '14

24 Oct '14

3 5

How to play play-list file (m3u format with mod_shout)
by Aqs Younas 24 Oct '14

24 Oct '14

i have locally a m3u (tunein-station.m3u) file and i just want to play it with mod_shout. Could someone please tell me how to play it. Thanks for help.

1 0

mod_com_g729 Issue
by Jerry Allen 24 Oct '14

24 Oct '14

Anyone ever seen this? The following 5 lines logged over and over sometimes the entire call sometimes only on the first few packets. Only does this calling the number below (that I have seen so far). Audio is completely trashed when this occurs. G729/PCMU Grandstream GXP2200 to gateway Vitelity G729/PCMU/GSM Dual core (2 threads) Intel(R) Xeon(R) CPU 5110 @ 1.60GHz Debian 7.6 Freeswitch latest from git build from source G729 mod_com_g729 fs-201409100948-installer 2014-10-22 10:44:37.910219 [WARNING] switch_core_media.c:1964 Changing current codec to PCMU (payload type 0). 2014-10-22 10:44:37.930219 [DEBUG] switch_core_media.c:2279 Changing Codec from G729@20ms@8000hz to PCMU@20ms@8000hz 2014-10-22 10:44:37.970219 [DEBUG] switch_core_media.c:2371 Set Codec sofia/external/3086352211 PCMU/8000 20 ms 160 samples 64000 bits 1 channels 2014-10-22 10:44:37.970219 [DEBUG] switch_core_codec.c:123 sofia/external/3086352211 Original read codec replaced with PCMU:0 2014-10-22 10:44:37.990219 [DEBUG] switch_core_media.c:1953 alternate payload received (received 18, expecting 0) Jerry Allen

6 6

FTDM channels are stucking in HANGUP state
by Vishal Kakkar 24 Oct '14

24 Oct '14

Hi all, Observing that channels are getting stuck in HANGUP state.. So next attempt to make outgoing calls prompts "Channel in use" *freeswitch@mansarover> ftdm core state HANGUP* [s2c1][2:32] in state HANGUP [s2c2][2:33] in state HANGUP [s2c3][2:34] in state HANGUP [s2c4][2:35] in state HANGUP [s2c5][2:36] in state HANGUP [s2c6][2:37] in state HANGUP [s2c7][2:38] in state HANGUP [s2c8][2:39] in state HANGUP [s2c9][2:40] in state HANGUP [s2c10][2:41] in state HANGUP [s2c11][2:42] in state HANGUP [s2c12][2:43] in state HANGUP [s2c13][2:44] in state HANGUP [s2c14][2:45] in state HANGUP [s2c15][2:46] in state HANGUP [s2c17][2:48] in state HANGUP [s2c18][2:49] in state HANGUP [s2c19][2:50] in state HANGUP [s2c20][2:51] in state HANGUP [s2c21][2:52] in state HANGUP [s2c22][2:53] in state HANGUP [s2c23][2:54] in state HANGUP [s2c24][2:55] in state HANGUP [s2c25][2:56] in state HANGUP [s2c27][2:58] in state HANGUP [s2c28][2:59] in state HANGUP [s2c29][2:60] in state HANGUP [s2c30][2:61] in state HANGUP [s2c31][2:62] in state HANGUP Total channels in state HANGUP: 29 *freeswitch@mansarover> ftdm dump wp2 1* span_id: 2 chan_id: 1 physical_span_id: 2 physical_chan_id: 32 physical_status: ok physical_status_red: 0 physical_status_yellow: 0 physical_status_rai: 0 physical_status_blue: 0 physical_status_ais: 0 physical_status_general: 0 signaling_status: UP type: B state: HANGUP last_state: TERMINATING txgain: 0.00 rxgain: 0.00 cid_date: cid_name: cid_num: 01203890380 ani: aniII: dnis: 09819154202 rdnis: cause: NORMAL_CLEARING session: (none) -- States -- -- Function -- -- Location -- -- Time Offset -- DIALING => PROCEED [on_proceeding] [ftmod_libpri.c:1586] 0ms PROCEED => TERMINATING [on_hangup] [ftmod_libpri.c:1444] 4991ms TERMINATING => HANGUP [channel_on_hangup] [mod_freetdm.c:623] 1ms HANGUP => HANGUP_COMPLETE [on_hangup] [ftmod_libpri.c:1458] 153ms HANGUP_COMPLETE => DOWN [state_advance] [ftmod_libpri.c:1266] 0ms DOWN => DIALING [channel_outgoing_channel] [mod_freetdm.c:1767] 757ms DIALING => PROCEED [on_proceeding] [ftmod_libpri.c:1586] 158ms PROCEED => RINGING [on_ringing] [ftmod_libpri.c:1685] 8029ms RINGING => TERMINATING [on_hangup] [ftmod_libpri.c:1477] 35432ms *TERMINATING => HANGUP * [channel_on_hangup] [mod_freetdm.c:623] 0ms Time since last state change:* 1213972ms* *freeswitch@mansarover> status* UP 0 years, 0 days, 0 hours, 54 minutes, 5 seconds, 411 milliseconds, 728 microseconds FreeSWITCH (Version 1.5.15b git acd8d74 2014-10-03 16:48:43Z 64bit) is ready 274 session(s) since startup 1 session(s) - peak 13, last 5min 2 0 session(s) per Sec out of max 30, peak 3, last 5min 3 1000 session(s) max min idle cpu 0.00/99.83 Current Stack Size/Max 240K/8192K So one by one i see channels are blocked in HANGUP state so are not being used for further calls. Can anyone help what could be the problem. I think channel state should move to HANGUP_COMPLETE and then to DOWN. So that it can be used in further calls. Thanks, Vishal.

1 0

site is broken again?
by Денис 23 Oct '14

23 Oct '14

I try view wiki https://wiki.freeswitch.org/wiki/Variable_sip_renegotiate_codec_on_reinvite and got Error code: ERR_CONNECTION_TIMED_OUT and in https://confluence.freeswitch.org/

3 5

Anyone have any advice for configuring a OBIHAI300
by Blake Priddy 23 Oct '14

23 Oct '14

I am getting a comm error when trying to receive a fax. On my linksys devices I can set jitter adjustments and I am wondering if that is the problem with this one.. -- *Blakelund Priddy* Network & Systems Engineer Bryant Public School District Bryant, Arkansas 72022 http://www.bryantschools.org p 501-653-5038 f 501-847-5656

2 1

problem with user database and aditional profiles
by Jason Holden 23 Oct '14

23 Oct '14

Hi, I currently need to add an additional sip profile since port 5060 is being blocked by some ISP's. The problem I am having is that any user on the new profile can not be called directly by user/ext since the lookup in the db fails to locate any details for the user. For now I've setup direct ip dialing on the bridge statements but I'd like to be able to have the profile function the same as my primary default internal profile. Any help is appreciated. Thanks.

2 1

LUA, ESL & DTMF
by Stuart Mills 23 Oct '14

23 Oct '14

Hi, Does anyone know if there is a reason why LUA script will not see DTMF digits when call is initially controlled using ESL. All DTMF seems to work fine in ESL but when executing luarun, the script fails to see DTMF using PlayAndGetDigits on the outbound channel. Regards, Stuart

2 1

G729
by Andre Demattia 23 Oct '14

23 Oct '14

Hi does FreeSWITCH work with G729 for windows and embedded? Thanks

6 11

Need A-Z sip termination with t.38 support
by Tahir Almas 23 Oct '14

23 Oct '14

I need a-z sip termination with competitive rates supporting g.711, t.38 and 500 concurrent calls capacity immediately with no minimum criteria , Please contact with me off the list *Tahir Almas* Managing Partner ICT Innovations http://www.ictinnovations.com Leveraging open source in ICT

1 0