July 2013 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Hey Guys don¹t forget the Friday Free For All this afternoon on 888
by Ken Rice 05 Jul '13

05 Jul '13

You know it, its that day again... Friday Free For All http://wiki.freeswitch.org/wiki/Weekly_Conference_Call_Calling_Instructions for how to access the bridge, Or call sip:888@conference.freeswitch.org -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch

2 1

nibblebill switch nibble_account when balance depleted
by khelfam 05 Jul '13

05 Jul '13

Hi, i need to implement a billig solution using mod_nibblebill with the need below: each user has deux nibble_account, when the balance of the first nibble_account is depleted nibble_bill switch to the second nibble_account. is it possible to implement this ? and how to thx -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/nibblebill-switch-nibble-acco… Sent from the freeswitch-users mailing list archive at Nabble.com.

1 0

record file failure
by Khue Nguyen Minh 05 Jul '13

05 Jul '13

Hi all, I'm testing function "recordFile" with scripts: var is_exit = false; function on_dtmf(session, type, obj, arg){ try{ if (type == "dtmf"){ if (obj.digit == '*'){ is_exit = true; return false; } } } catch(e){ console_log("info","error read dtmf\n"); } return true; } session.answer(); while (session.ready()){ console_log("info","starting record\n"); session.recordFile("/opt/freeswitch/recordings/test.wav", on_dtmf, "", 240, 500, 3); console_log("info","finish\n"); session.streamFile("/opt/freeswitch/recordings/test.wav"); session.hangup(); } I see that function "recordFile" return immediately when called, and, I didn't play file "test.wav". My FreeSWITCH receive incoming call from GMSC of operator. Please check it for me. Thanks & Best regards, Khue.

1 0

Re: [Freeswitch-users] how to configure pin for use in gsmopen ?
by Luis Azedo 05 Jul '13

05 Jul '13

Hi, thanks i disabled the pin with a cellphone. i can't seem to get this to work. i configured the imei because i don't know what dev to use. how can i find what /dev/USB.... should i use if detection fails ? i have a minimal centos 6.4 installation, do i need to install any missing components ? thanks from lsusb command Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet from "load mod_gsmopen" 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1127 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1127 ][none ][-1,-1,-1] Default globals.destination=5000 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1129 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1129 ][none ][-1,-1,-1] Default globals.context=default 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1137 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1137 ][none ][-1,-1,-1] globals.debug=0 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1139 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1139 ][none ][-1,-1,-1] globals.debug=9 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1145 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1145 ][none ][-1,-1,-1] globals.dialplan=XML 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1151 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1151 ][none ][-1,-1,-1] globals.context=context_2 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1142 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1142 ][none ][-1,-1,-1] globals.hold_music= 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1148 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1148 ][none ][-1,-1,-1] globals.destination=9999 2013-07-04 19:52:05.429699 [DEBUG] gsmopen_protocol.cpp:2869 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 2869 ][none ][-1,-1,-1] setting boost 0 to 512.000000 2013-07-04 19:52:05.429699 [DEBUG] gsmopen_protocol.cpp:2869 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 2869 ][none ][-1,-1,-1] setting boost 0 to 512.000000 2013-07-04 19:52:05.429699 [ERR] mod_gsmopen.cpp:3035 rev 32adc78|4640a9c[(nil)|37 ][ERRORA 3035 ][none ][-1,-1,-1] port /dev/ttyUSB2, NOT open 2013-07-04 19:52:05.429699 [NOTICE] mod_gsmopen.cpp:3053 rev 32adc78|4640a9c[(nil)|37 ][NOTICA 3053 ][none ][-1,-1,-1] ************************************************ 2013-07-04 19:52:05.429699 [NOTICE] mod_gsmopen.cpp:3054 rev 32adc78|4640a9c[(nil)|37 ][NOTICA 3054 ][none ][-1,-1,-1] f.imei=|| 2013-07-04 19:52:05.429699 [NOTICE] mod_gsmopen.cpp:3055 rev 32adc78|4640a9c[(nil)|37 ][NOTICA 3055 ][none ][-1,-1,-1] f.imsi=|| 2013-07-04 19:52:05.429699 [NOTICE] mod_gsmopen.cpp:3056 rev 32adc78|4640a9c[(nil)|37 ][NOTICA 3056 ][none ][-1,-1,-1] f.tty_data_device = |/dev/ttyUSB2| 2013-07-04 19:52:05.429699 [NOTICE] mod_gsmopen.cpp:3057 rev 32adc78|4640a9c[(nil)|37 ][NOTICA 3057 ][none ][-1,-1,-1] f.tty_audio_device = |/dev/ttyUSB1| 2013-07-04 19:52:05.429699 [NOTICE] mod_gsmopen.cpp:3058 rev 32adc78|4640a9c[(nil)|37 ][NOTICA 3058 ][none ][-1,-1,-1] ************************************************ 2013-07-04 19:52:05.429699 [WARNING] mod_gsmopen.cpp:1589 rev 32adc78|4640a9c[(nil)|37 ][WARNINGA 1589 ][interface0][-1, 0, 0] STARTING interface_id=1 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1590 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1590 ][interface0][-1, 0, 0] id=1 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1591 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1591 ][interface0][-1, 0, 0] name=interface0 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1592 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1592 ][interface0][-1, 0, 0] hold-music= 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1593 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1593 ][interface0][-1, 0, 0] context=context_2 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1594 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1594 ][interface0][-1, 0, 0] dialplan=XML 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1595 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1595 ][interface0][-1, 0, 0] destination=351934612906 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1596 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1596 ][interface0][-1, 0, 0] imei=353435021664348 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1597 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1597 ][interface0][-1, 0, 0] imsi= 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1598 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1598 ][interface0][-1, 0, 0] controldevice_name=/dev/ttyUSB3 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1599 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1599 ][interface0][-1, 0, 0] controldevice_audio_name=/dev/ttyUSB2 2013-07-04 19:52:05.429699 [DEBUG] mod_gsmopen.cpp:1601 rev 32adc78|4640a9c[(nil)|37 ][DEBUG_GSMOPEN 1601 ][interface0][-1, 0, 0] gsmopen_serial_sync_period=300 2013-07-04 19:52:05.429699 [ERR] gsmopen_protocol.cpp:137 rev 32adc78|4640a9c[(nil)|37 ][ERRORA 137 ][interface0][-1, 0, 0] port /dev/ttyUSB3, NOT open 2013-07-04 19:52:05.429699 [ERR] mod_gsmopen.cpp:1608 rev 32adc78|4640a9c[(nil)|37 ][ERRORA 1608 ][interface0][-1, 0, 0] STARTING interface_id=1 FAILED: gsmopen_serial_init failed 2013-07-04 19:52:05.429699 [ERR] mod_gsmopen.cpp:2684 rev 32adc78|4640a9c[(nil)|37 ][ERRORA 2684 ][interface0][-1, 0, 0] ALARM on interface interface0: 2013-07-04 19:52:05.449493 [CONSOLE] switch_loadable_module.c:1401 Successfully Loaded [mod_gsmopen] 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:147 Adding Endpoint 'gsmopen' 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:305 Adding API Function 'gsm' 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:305 Adding API Function 'gsmopen' 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:305 Adding API Function 'gsmopen_boost_audio' 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:305 Adding API Function 'gsmopen_dump' 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:305 Adding API Function 'gsmopen_sendsms' 2013-07-04 19:52:05.449493 [NOTICE] switch_loadable_module.c:417 Adding Chat interface 'sms'

2 1

Reason header in SIP 180 / 183
by jay binks 05 Jul '13

05 Jul '13

Hey all... I need to tap the collective knowledge of all. In the scenario where I can get a Reason header in a Progress response ( 180 / 183 ) how can I control how Freeswitch will respond. I can see 3 possible scenarios here, but it would be great to control which scenario was used. 1) Freeswitch just passes through the 180/183 with reason header... without doing anything with it. 2) Freeswitch can remove the reason header from the 180/183 and just play back the media stream that is accompanied. 3) Freeswitch can act upon the reason, and hangup the call .. ( if its a Q850 Cause code 1 for example ) now... where is this useful. well, what if I had a carrier that gave Q850 cause codes in ISDN progress messages ( number unallocated ) but then they played an RVA saying "number dialed is not connected". They have done it this way to allow customer to choose how to handle the RVA ( do you want the RVA or not ) but does FS give me the ability to truly control this ? ( without needing to go as far as complex ESL applications ) -- Sincerely Jay

2 1

Is FreeSwitch run on Windows 2008 R2 64?
by Albert Nguyen 05 Jul '13

05 Jul '13

Hi, I am trying to load freeswitch on to Windows 2008 R2 64 bit server but so far I can not get any windows versions of freeswitch to work on this os (latest 32 bits and 64 bits version from freeswitch web site). It give error message saying that it could not load the ..v8.dll and another dll file within the switch_loadable_module.c. Is Freeswitch not compatible to win2008R2 or am I missing something? Cheers, Albert

6 21

att_xfer question
by Stuart Mills 05 Jul '13

05 Jul '13

Hi all, I have a question which is hopefully not too complicated. I’m playing with mid call transfer features, I have an extension in features.conf to do the MCT which works fine, a_leg connects to the b_leg, then b_leg transfer to destination c_leg and can talk. My question is this, is it then easy for b_leg to toggle the call between a_leg and c_leg, I take it it’s just another feature extension that bridges calls between the 2 legs, could it be that simple? Kind Regards, Stuart Mills

6 12

FFax T.38 how to force Freeswitch to reinvite with T.38
by Peter Steinbach 04 Jul '13

04 Jul '13

Hello, while receiving a fax and forwarding it to Hylafay via a tty modem interface, we currently only get T.30 analogous fax working. We have set <action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/> However Freeswitch does not offer a reinvite with T.38. The strange thing is: When we receive a fax with the rxfax application (and do not forward via tty modem to Hylafax), then Freswitch does offer a T.38 Reinvite and the fax is received via T.38. So <patton> ----> <freeswitch rxfax>: Freeswitch offers T.38 Reinvite to Patton <patton> ----> <freeswitch> --TTY modem--> <Hylafax>: Freeswitch does not offer Reinvite to Patton Anybody has a clue to overcome this? -- With kind regards Peter Steinbach Telefaks Services GmbH mailto:lists (att) telefaks.de Internet: www.telefaks.de

1 1

Faxing problems if B leg offers T.38
by Rob Morin 04 Jul '13

04 Jul '13

Im having problems faxing if the B leg offers T.38. Several scenarios, but always the same result. First, the architecture FAX à ATA (T.38 optional) à FS à Carrier à Destination (Possibly another carrier (PSTN) and the fax machine) On my ATA, T.38 is enabled (Auto Detect). If the destination supports T.38, the Carrier will offer it to Freeswitch. If the Destination doesnt support T.38, the B leg doesnt offer it and the faxes go through. Ive set Freeswitch as: <action application="set" data="fax_enable_t38=true"/> <action application="export" data="t38_passthru=true"/> When thats the case, and the B leg offers T.38, Freeswitch passes through the offer and the ATA responds, 3 times. But the response never gets sent to the B leg, so it terminates the call after about 30 seconds. When I set Freeswitch as: <action application="set" data="fax_enable_t38=false"/> The B leg still offers T.38 if its other side is capable. Freeswitch doesnt pass the offer through and the B leg terminates the call after about 30 seconds. Im running on a recent git ( FreeSWITCH Version 1.0.head (git-86d757d 2011-05-17 22-51-47 -0500) ). Ive had no success attempting to configure FS as a gateway. Frankly, T.38 passthrough has had the most success, mostly when the other ends arent T.38 capable and it stays in G711u. Is there something else I need to do to enable T.38 in passthrough mode? Thank you, Rob Morin PS I can provide tcpdumps of this, or whatever else is necessary.

5 13

Caller ID and Caller Name Issue
by Jagadish Thoutam 04 Jul '13

04 Jul '13

HI, i have a freeswitch as a VOIP Gateway that will handle the Inbound and Outbound calls with media proxy, here issue comes My Freeswith is Sending FreeSwitch as a callid Number.. and callid name as a Number i wondered why it is sending like that i even comment the effective acller id name and caller id but still same issue, can any one help on this. Version : FreeSWITCH Version 1.5.1b+git~20130423T194907Z~e1c325dcb5 (git e1c325d 2013-04-23 19:49:07Z) Thanks Jagan

5 11