- FreeSWITCH-users - FreeSWITCH Mailing Lists

SIP Trunk registration issues.
by Siddhardha Garige 27 Aug '14

27 Aug '14

Hello all, New to Freeswith and I am working on setting up a sip trunk to register freeswith to external service provider. Follwoing sequences are happening in order. 1. Freeswith sends REGISTER to external Registrar. (Expire=360) 2. Registrar responds with 200OK. (expries=360) 3. After few seconds, Freeswitch sends REGISTER with Expries=0 and unregisters. Looks like Timer K is expiring. After successful 200 OK why expring timer K triggers an UnRegister? nta.c:9099 outgoing_timer_dk() nta: timer K fired, terminate REGISTER (64250994) Any help is much appreciated. -Sid I enabled sofia debug and here is the log 2014-08-27 17:15:16.842412 [NOTICE] sofia_reg.c:423 Registering Inphonex nua.c:622 nua_register() nua: nua_register: entering nua_stack.c:529 nua_signal() nua(0xb6518d28): sent signal r_register nua_stack.c:569 nua_stack_signal() nua(0xb6518d28): recv signal r_register nua_params.c:480 nua_stack_set_params() nua: nua_stack_set_params: entering soa.c:280 soa_clone() soa_clone(static::0xb6100d80, 0xb61008f8, 0xb6518d28) called soa.c:403 soa_set_params() soa_set_params(static::0xb6114780, ...) called soa.c:403 soa_set_params() soa_set_params(static::0xb6114780, ...) called nua_dialog.c:338 nua_dialog_usage_add() nua(0xb6518d28): adding register usage nta.c:4415 nta_leg_tcreate() nta_leg_tcreate(0xb612b810) nta.c:2665 nta_tpn_by_url() nta: selecting scheme sip tport.c:3257 tport_tsend() tport_tsend(0xb61023d8) tpn = udp/172.16.222.166:5060 tport.c:4046 tport_resolve() tport_resolve addrinfo = 172.16.222.166:5060 tport.c:4680 tport_by_addrinfo() tport_by_addrinfo(0xb61023d8): not found by name udp/172.16.222.166:5060 tport.c:3594 tport_vsend() tport_vsend(0xb61023d8): 574 bytes of 574 to udp/172.16.222.166:5060 tport.c:3492 tport_send_msg() tport_vsend returned 574 nta.c:8302 outgoing_send() nta: sent REGISTER (64250994) to udp/172.16.222.166:5060 tport.c:4160 tport_pend() tport_pend(0xb61023d8): pending 0xb6127c50 for udp/172.16.1.10:5092 (already 0) nta.c:1350 set_timeout() nta: timer set to 32000 ms nta.c:1348 set_timeout() nta: timer shortened to 1000 ms tport.c:2749 tport_wakeup_pri() tport_wakeup_pri(0xb61023d8): events IN tport.c:2864 tport_recv_event() tport_recv_event(0xb61023d8) tport.c:3205 tport_recv_iovec() tport_recv_iovec(0xb61023d8) msg 0xb6153848 from (udp/172.16.1.10:5092) has 435 bytes, veclen = 1 tport.c:3023 tport_deliver() tport_deliver(0xb61023d8): msg 0xb6153848 (435 bytes) from udp/172.16.222.166:5092/sip next=(nil) nta.c:3297 agent_recv_response() nta: received 200 OK for REGISTER (64250994) nta.c:3364 agent_recv_response() nta: 200 OK is going to a transaction nta.c:9562 outgoing_estimate_delay() nta_outgoing: RTT is 3.65 ms tport.c:4222 tport_release() tport_release(0xb61023d8): 0xb6127c50 by 0xb612cac0 with 0xb6153848 nua_dialog.c:564 nua_dialog_usage_set_refresh_range() nua(): refresh register after 259 seconds (in [90..270]) nua_stack.c:271 nua_stack_event() nua(0xb6518d28): event r_register 200 OK nua_stack.c:359 nua_application_event() nua: nua_application_event: entering nua.c:366 nua_handle_magic() nua: nua_handle_magic: entering nua.c:366 nua_handle_magic() nua: nua_handle_magic: entering nta.c:1296 agent_timer() nta: timer set next to 4003 ms nta.c:9099 outgoing_timer_dk() nta: timer K fired, terminate REGISTER (64250994) nta.c:8797 outgoing_reclaim_queued() outgoing_reclaim_all((nil), (nil), 0xb570f1cc) nta.c:8927 _nta_outgoing_timer() nta_outgoing_timer: 0/0 resent, 0/0 tout, 1/1 term, 1/1 free nta.c:1289 agent_timer() nta: timer not set

1 0

feature idea for fs_cli
by Nathan Neulinger 27 Aug '14

27 Aug '14

In fs_cli, would be cool to have cisco-like extensions to support include/exclude/begin: show channels | include regex show channels | exclude regex show channels | begin regex It's obviously not always going to generate useful output (particularly since it will usually strip header), but can be very helpful when doing interactive diagnostics. http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fundamentals/configuration… -- Nathan ------------------------------------------------------------ Nathan Neulinger nneul(a)mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect

6 6

Re: [Freeswitch-users] EnterpriseOriginate and mod_sofia, manual redirect
by Dan Christian Bogos 27 Aug '14

27 Aug '14

Hey Brian, I would like to process manually the redirect within dialplan, but in case of enterprise originate, this happens for me automatically although I have manual_redirect set. Thanks, DanB

5 4

CDR problem with att_xfer
by satyajeet vyas 27 Aug '14

27 Aug '14

I am using att_xfer for conversation between A, B, C A calls B, B calls C then B press 0 to create conference. There is 3 CDR record as expected but if C answer the call then all 3 CID_name is "Outbound Call" and All 3 "CID_number" is C's number however if C dont answer the call then all 3 records are just showing fine. So anyone can explain this behavior..!

2 2

Freeswitch won't start up after crash
by Chris Martineau 27 Aug '14

27 Aug '14

Hi, Experimenting with trying to get nibblebill working with conference and caused a Floating point exception (core dumped). Ever since I cannot now start up freeswitch and only get the following errors. I have no core database active only that required for nibblebill. 2014-08-27 10:56:00.240055 [INFO] switch_event.c:669 Activate Eventing Engine. 2014-08-27 10:56:00.240290 [WARNING] switch_event.c:651 Create additional event dispatch thread 0 2014-08-27 10:56:00.271503 [INFO] switch_nat.c:419 Scanning for NAT 2014-08-27 10:56:00.271654 [DEBUG] switch_nat.c:169 Checking for PMP 1/5 2014-08-27 10:56:00.521437 [DEBUG] switch_nat.c:169 Checking for PMP 2/5 2014-08-27 10:56:00.522435 [DEBUG] switch_nat.c:169 Checking for PMP 3/5 2014-08-27 10:56:01.022429 [DEBUG] switch_nat.c:169 Checking for PMP 4/5 2014-08-27 10:56:02.022380 [DEBUG] switch_nat.c:169 Checking for PMP 5/5 2014-08-27 10:56:04.022277 [ERR] switch_nat.c:200 Error checking for PMP [general error] 2014-08-27 10:56:04.022309 [DEBUG] switch_nat.c:424 Checking for UPnP 2014-08-27 10:56:16.022732 [INFO] switch_nat.c:440 No PMP or UPnP NAT devices detected! 2014-08-27 10:56:16.024856 [ERR] switch_core_db.c:108 SQL ERR [malformed database schema (uuindex2) - no such table: main.channels] 2014-08-27 10:56:16.024882 [ERR] switch_core_db.c:223 SQL ERR [malformed database schema (uuindex2) - no such table: main.channels] 2014-08-27 10:56:16.024927 [CRIT] switch_core_sqldb.c:507 Failure to connect to CORE_DB core! 2014-08-27 10:56:16.024956 [ERR] switch_core_sqldb.c:3321 Error Opening DB! Cannot Initialize [Error activating database] Any ideas what is going wrong as there is no database main? Obviously something has corrupted but what? Any ideas or pointers would be greatly appreciated. Thanks Chris

3 6

Need help setting up Freeswitch with commercial SSL certificate
by Tim Smith 27 Aug '14

27 Aug '14

Hi, The story so far : • I've installed new certs • checked config in vars.xml is pointing to the right place • restarted freeswitch entirely • it is still using some sort of internal certificates ?? cafile and agent contain my certs and not those referred to in the openssl output ?? What am I missing ?? Thanks Tim FreeSWITCH Version 1.4.8+git~20140821T185758Z~1fe89f530f~64bit (git 1fe89f5 2014-08-21 18:57:58Z 64bit) /usr/local/freeswitch/conf/ssl# openssl verify -CAfile cafile.pem agent.pem agent.pem: OK /usr/local/freeswitch/conf# cat vars.xml | grep ssl valid options: sslv2,sslv3,sslv23,tlsv1,tlsv1.1,tlsv1.2 <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=true"/> <X-PRE-PROCESS cmd="set" data="internal_ssl_dir=$${base_dir}/conf/ssl"/> <X-PRE-PROCESS cmd="set" data="external_ssl_enable=true"/> <X-PRE-PROCESS cmd="set" data="external_ssl_dir=$${base_dir}/conf/ssl"/> $ openssl s_client -showcerts -connect my.server:5061 CONNECTED(00000003) depth=0 /C=US/CN=FreeSWITCH verify error:num=18:self signed certificate verify return:1 depth=0 /C=US/CN=FreeSWITCH verify return:1 --- Certificate chain 0 s:/C=US/CN=FreeSWITCH i:/C=US/CN=FreeSWITCH -----BEGIN CERTIFICATE----- -----END CERTIFICATE----- --- Server certificate subject=/C=US/CN=FreeSWITCH issuer=/C=US/CN=FreeSWITCH --- No client certificate CA names sent --- SSL handshake has read 615 bytes and written 328 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None Start Time: Timeout : 300 (sec) Verify return code: 18 (self signed certificate) ---

5 13

MOD_VERTO / Windows Precompiled BInaries
by Victor Medina 26 Aug '14

26 Aug '14

Hi all! Does the latest freeswitch precompiles binaries comes with mod_verto included? I can't find it. Sin mas a que hacer referencia, Victor Medina

5 5

Cisco SX-20 video conferencing
by Norman Laidla 26 Aug '14

26 Aug '14

Hello, I tried sending this to the video mailing list, but after three failed deliveries, I figure that's a dead-end. Our office is setting up a video conferencing system and I've been tasked with making it work through FreeSWITCH. The end-point we're using is a Cisco Telepresence SX-20 (http://www.cisco.com/c/en/us/products/collaboration-endpoints/telepresence-…) unit. Currently, the test setup looks like this: a laptop running Zoiper, the SX-20 and a Debian server running FS, all on a LAN. Both end-points are registered on the internal profile. During calls, the audio stream works without a hitch, but the video is more problematic. There's basically no video. Setting FS to proxy media mode and enabling the proxy codecs lets audio pass, but no video at all. Setting FS to bypass mode is only marginally better: there's certainly a video stream, but it's corrupted beyond usefulness and only works from Zoiper to SX-20. I've run Wireshark and in proxy mode, h.263 packets move only from Zoiper to FS with nothing coming from FS to Zoiper; whereas in bypass mode, there is a stream of packets going from the SX-20 to Zoiper, but there's no image.

2 1

freeswitch-1.4.5-1 rpm building
by Mujahid Ali 26 Aug '14

26 Aug '14

i'm building freeswitch rpm from spec file i download freeswitch-1.4.5.tar.bz2 <http://files.freeswitch.org/freeswitch-1.4.5.tar.bz2> from http://files.freeswitch.org/ but during rpm building there is alot of errors like Processing files: freeswitch-codec-speex-1.4.5-1.el6.x86_64 error: File not found by glob: /root/rpmbuild/BUILDROOT/freeswitch-1.4.5-1.el6.x86_64/usr/lib64/freeswitch/mod/mod_speex.so* RPM build errors: File not found by glob: /root/rpmbuild/BUILDROOT/freeswitch-1.4.5-1.el6.x86_64/usr/lib64/freeswitch/mod/mod_speex.so*

4 3

Mod_managed Linux Debian
by Andre Demattia 25 Aug '14

25 Aug '14

Hi how do I install(get) mod managed for Debian? I'm following these instructions https://confluence.freeswitch.org/display/FREESWITCH/Debian#Debian-DebianPa… But when I search for the module it's not found. Also is there a file path/ structure somewhere? In windows its all in one folder. Thanks Andre

1 0