- FreeSWITCH-users - FreeSWITCH Mailing Lists

multiple records of the same user registration on the same host
by Henry Huang 25 Aug '14

25 Aug '14

I did not enable the multiple_registation parameter in sip profile, but I am seeing multiple registrations of the same user in the sip_registration table through odbc. Here is how it happened, the client (pjsip) is registering through TCP, without un-registering, the client failed and got restarted again. Hence another registration was fired to the server; however, it did not replace the previous record, but instead created an additional one. Now, can someone explain to me how that is possible? How can I make sure the new registration overwrite the previous one. The only thing different is that every time when the client register again, it's using a different TCP port. Can that be the cause of multiple record? If so, what should I do? Here is an example of the registered record from sip_registration table except the TCP port number is different every time. I have also masked the IP addresses and sip_user call_id: VV3Fz9nEPrGZaVHi-Na0xUMR43u5pe4E sip_user: ****999 sip_host: sip.domain.com presence_hosts: sip.domain.com,10.10.10.10 contact: "user" <sip:****999@123.123.123.123:49311 ;transport=TCP;ob;fs_nat=yes;fs_path=sip%3A71117x0%40124.124.124.124%3A5060> status: Registered(AUTO-NAT-2.0) rpid: unknown expires: 1408559112 user_agent: unknown server_user: ****999 server_host: 11.11.11.11 profile_name: device_kamailio hostname: freeswitch01 network_ip: 124.124.124.124 network_port: 5060 sip_username: ****999 sip_realm: 124.124.124.124 mwi_user: ****999 mwi_host: sip.domain.com orig_server_host: 12.12.12.12 orig_hostname: freeswitch01 sub_host: NULL Thanks, Henry

1 1

freeswitch rpm build
by Mujahid Ali 25 Aug '14

25 Aug '14

i'm building freeswitch rpm from spec file i download freeswitch-1.4.7.tar.bz2 <http://files.freeswitch.org/freeswitch-1.4.7.tar.bz2> from http://files.freeswitch.org/ but during rpm building there is alot of errors like making all mod_cdr_pg_csv make[4]: Entering directory `/root/rpmbuild/BUILD/freeswitch-1.4.7/src/mod/event_handlers/mod_cdr_pg_csv' CC mod_cdr_pg_csv_la-mod_cdr_pg_csv.lo mod_cdr_pg_csv.c:40:33: error: postgresql/libpq-fe.h: No such file or directory mod_cdr_pg_csv.c:83: error: expected specifier-qualifier-list before 'PGconn' mod_cdr_pg_csv.c: In function 'config_validate_spool_dir': mod_cdr_pg_csv.c:110: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c: At top level: mod_cdr_pg_csv.c:121: error: 'struct <anonymous>' has no member named 'legs' mod_cdr_pg_csv.c:122: error: 'struct <anonymous>' has no member named 'spool_format' mod_cdr_pg_csv.c:123: error: 'struct <anonymous>' has no member named 'rotate' mod_cdr_pg_csv.c:124: error: 'struct <anonymous>' has no member named 'debug' mod_cdr_pg_csv.c:127: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c: In function 'do_rotate': mod_cdr_pg_csv.c:167: error: 'struct <anonymous>' has no member named 'rotate' mod_cdr_pg_csv.c:187: error: 'struct <anonymous>' has no member named 'rotate' mod_cdr_pg_csv.c: In function 'insert_cdr': mod_cdr_pg_csv.c:250: error: 'PGresult' undeclared (first use in this function) mod_cdr_pg_csv.c:250: error: (Each undeclared identifier is reported only once mod_cdr_pg_csv.c:250: error: for each function it appears in.) mod_cdr_pg_csv.c:250: error: 'res' undeclared (first use in this function) mod_cdr_pg_csv.c:250: error: invalid operands to binary * (have 'struct switch_xml_config_item_t *' and 'struct switch_xml_config_item_t *') cc1: warnings being treated as errors mod_cdr_pg_csv.c:250: error: statement with no effect mod_cdr_pg_csv.c:255: error: 'struct <anonymous>' has no member named 'debug' mod_cdr_pg_csv.c:259: error: 'struct <anonymous>' has no member named 'db_mutex' mod_cdr_pg_csv.c:259: error: passing argument 1 of 'switch_mutex_lock' from incompatible pointer type ../../../../src/include/switch_apr.h:351: note: expected 'struct switch_mutex_t *' but argument is of type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:261: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:261: error: implicit declaration of function 'PQstatus' mod_cdr_pg_csv.c:261: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:261: error: 'CONNECTION_OK' undeclared (first use in this function) mod_cdr_pg_csv.c:261: error: comparison between pointer and integer mod_cdr_pg_csv.c:262: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:262: error: implicit declaration of function 'PQconnectdb' mod_cdr_pg_csv.c:262: error: statement with no effect mod_cdr_pg_csv.c:265: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:265: error: comparison between pointer and integer mod_cdr_pg_csv.c:266: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:266: error: statement with no effect mod_cdr_pg_csv.c:268: error: implicit declaration of function 'PQerrorMessage' mod_cdr_pg_csv.c:268: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:268: error: format '%s' expects type 'char *', but argument 8 has type 'int' mod_cdr_pg_csv.c:272: error: implicit declaration of function 'PQexec' mod_cdr_pg_csv.c:272: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:272: error: statement with no effect mod_cdr_pg_csv.c:273: error: implicit declaration of function 'PQresultStatus' mod_cdr_pg_csv.c:273: error: 'PGRES_COMMAND_OK' undeclared (first use in this function) mod_cdr_pg_csv.c:273: error: comparison between pointer and integer mod_cdr_pg_csv.c:274: error: implicit declaration of function 'PQresultErrorMessage' mod_cdr_pg_csv.c:274: error: format '%s' expects type 'char *', but argument 8 has type 'int' mod_cdr_pg_csv.c:275: error: implicit declaration of function 'PQclear' mod_cdr_pg_csv.c:282: error: 'struct <anonymous>' has no member named 'db_mutex' mod_cdr_pg_csv.c:282: error: passing argument 1 of 'switch_mutex_unlock' from incompatible pointer type ../../../../src/include/switch_apr.h:357: note: expected 'struct switch_mutex_t *' but argument is of type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:289: error: implicit declaration of function 'PQfinish' mod_cdr_pg_csv.c:289: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:290: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:290: error: statement with no effect mod_cdr_pg_csv.c:291: error: 'struct <anonymous>' has no member named 'db_mutex' mod_cdr_pg_csv.c:291: error: passing argument 1 of 'switch_mutex_unlock' from incompatible pointer type ../../../../src/include/switch_apr.h:357: note: expected 'struct switch_mutex_t *' but argument is of type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:294: error: 'struct <anonymous>' has no member named 'spool_format' mod_cdr_pg_csv.c:294: error: comparison between pointer and integer mod_cdr_pg_csv.c:295: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c:299: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c: In function 'my_on_reporting': mod_cdr_pg_csv.c:323: error: 'struct <anonymous>' has no member named 'legs' mod_cdr_pg_csv.c:323: error: invalid operands to binary & (have 'struct switch_xml_config_item_t *' and 'int') mod_cdr_pg_csv.c:323: error: 'struct <anonymous>' has no member named 'legs' mod_cdr_pg_csv.c:323: error: invalid operands to binary & (have 'struct switch_xml_config_item_t *' and 'int') mod_cdr_pg_csv.c:324: error: 'struct <anonymous>' has no member named 'legs' mod_cdr_pg_csv.c:324: error: invalid operands to binary & (have 'struct switch_xml_config_item_t *' and 'int') mod_cdr_pg_csv.c:335: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c:335: error: passing argument 1 of 'switch_dir_make_recursive' from incompatible pointer type ../../../../src/include/switch_apr.h:898: note: expected 'const char *' but argument is of type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:336: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c:336: error: format '%s' expects type 'char *', but argument 8 has type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:340: error: 'struct <anonymous>' has no member named 'debug' mod_cdr_pg_csv.c:361: error: implicit declaration of function 'PQescapeString' mod_cdr_pg_csv.c: In function 'event_handler': mod_cdr_pg_csv.c:411: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:412: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:413: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:413: error: statement with no effect mod_cdr_pg_csv.c: In function 'load_config': mod_cdr_pg_csv.c:444: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:445: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:446: error: 'struct <anonymous>' has no member named 'db_mutex' mod_cdr_pg_csv.c:446: error: passing argument 1 of 'switch_mutex_destroy' from incompatible pointer type ../../../../src/include/switch_apr.h:344: note: expected 'struct switch_mutex_t *' but argument is of type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:447: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:447: error: statement with no effect mod_cdr_pg_csv.c:452: error: 'struct <anonymous>' has no member named 'db_mutex' mod_cdr_pg_csv.c:452: error: passing argument 1 of 'switch_mutex_init' from incompatible pointer type ../../../../src/include/switch_apr.h:337: note: expected 'struct switch_mutex_t **' but argument is of type 'struct switch_xml_config_item_t (*)[1]' mod_cdr_pg_csv.c: In function 'mod_cdr_pg_csv_load': mod_cdr_pg_csv.c:528: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c:528: error: passing argument 1 of 'switch_dir_make_recursive' from incompatible pointer type ../../../../src/include/switch_apr.h:898: note: expected 'const char *' but argument is of type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c:529: error: 'struct <anonymous>' has no member named 'spool_dir' mod_cdr_pg_csv.c:529: error: format '%s' expects type 'char *', but argument 8 has type 'struct switch_xml_config_item_t *' mod_cdr_pg_csv.c: In function 'mod_cdr_pg_csv_shutdown': mod_cdr_pg_csv.c:550: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:551: error: 'struct <anonymous>' has no member named 'db_connection' mod_cdr_pg_csv.c:552: error: 'struct <anonymous>' has no member named 'db_online' mod_cdr_pg_csv.c:552: error: statement with no effect make[4]: *** [mod_cdr_pg_csv_la-mod_cdr_pg_csv.lo] Error 1 make[4]: Leaving directory `/root/rpmbuild/BUILD/freeswitch-1.4.7/src/mod/event_handlers/mod_cdr_pg_csv' make[3]: *** [mod_cdr_pg_csv-all] Error 1 make[3]: Leaving directory `/root/rpmbuild/BUILD/freeswitch-1.4.7/src/mod' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/rpmbuild/BUILD/freeswitch-1.4.7/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/rpmbuild/BUILD/freeswitch-1.4.7' make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.76GyR0 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.76GyR0 (%build) how can i solve it

5 6

EnterpriseOriginate and mod_sofia manual redirect
by Dan Christian Bogos 25 Aug '14

25 Aug '14

Hey Guys, Is it possible to work with enterprise originate and manual redirect of mod_sofia? Tried that but without much luck. Did I hit a bug or since enterprise originate is a special treat of forking it has it's limits? Ta, DanB

2 1

Simpl5[WebRTC] to PSTN codec changed during a call
by Adrian Andrei 25 Aug '14

25 Aug '14

Hello, In my follwing setup Sipml5 -> FS -> Cisco ->PSTN the codec is changed during the call. At the first glance the call evolution is: 1. Sipml5 Client codec pref is OPUS,ISAC, PCMU, PCMA , Cisco voice class codec PCMU, PCMA (g711u&a). After negociation the PCMU codec is set. 2014-08-25 19:03:05.412802 [DEBUG] switch_core_media.c:3475 Audio Codec Compare [PCMU:0:8000:20:64000:1]/[PCMU:0:8000:20:64000:1] 2014-08-25 19:03:05.412802 [DEBUG] switch_core_media.c:3530 Audio Codec Compare [PCMU:0:8000:20:64000:1] ++++ is saved as a match The call is set up, voice goes well in both ways. 2. After a while(after receiving the next SDP packet from WebRtc Client) it seems that it finds a new codec match in OPUS. 2014-08-25 19:04:11.292795 [DEBUG] switch_core_media.c:3475 Audio Codec Compare [opus:111:48000:60:0:1]/[opus:116:48000:20:0:1] 2014-08-25 19:04:11.292795 [DEBUG] switch_core_media.c:3530 Audio Codec Compare [opus:116:48000:20:0:1] ++++ is saved as a match FS will change the codec and the call will end. 2014-08-25 19:04:11.292795 [DEBUG] switch_core_media.c:2260 Changing Codec from PCMU@20ms@8000hz to opus@20ms@48000hz 2014-08-25 19:04:11.332798 [DEBUG] switch_core_media.c:2352 Set Codec sofia/internal/xxxx(a)5.6.7.8 opus/48000 20 ms 960 samples 0 bits 1 channels 2014-08-25 19:04:11.332798 [DEBUG] switch_core_codec.c:123 sofia/internal/ xxxx(a)5.6.7.8 Original read codec replaced with opus:116 2014-08-25 19:04:11.352807 [NOTICE] switch_core_io.c:1257 Activating write resampler 2014-08-25 19:04:11.752801 [NOTICE] switch_rtp.c:1144 Auto Changing stun/rtp/dtls port from 1.2.3.4:50594 to 1.2.3.4:19602 2014-08-25 19:04:12.072801 [ERR] mod_opus.c:402 Decoder Error: corrupted stream! 2014-08-25 19:04:12.072801 [ERR] switch_core_io.c:1310 Codec OPUS (STANDARD) decoder error! 2014-08-25 19:04:12.072801 [DEBUG] switch_ivr_bridge.c:579 sofia/external/ 5555555(a)9.9.9.9 ending bridge by request from write function I tried to force codec on both legs by adding: <action application="set" data="absolute_codec_string=PCMU,PCMA"/> but nothing change. Also inbound-late-negotiation is set to true in sofia-profiles. Any ideea how to fix this issue? Here is the full log: http://pastebin.freeswitch.org/23161 Thank you

1 0

mod_lua
by Joel White 25 Aug '14

25 Aug '14

Just a quick question..... How many Lua / Bindings can you define in a FreeSWITCH instance? e.x. dialplan, directory, etc...

1 0

LUA
by Joel White 25 Aug '14

25 Aug '14

I am trying to get Lua generation of the Directory so I can also tie this in with auto provisioning. I have created the table in the Postgres DB and have the lua script specified in the lua module config But I keep getting this error 2014-08-18 13:07:11.869818 [ERR] mod_lua.cpp:203 /usr/local/freeswitch/scripts/gen_dir_user_xml.lua:5: attempt to index global 'params' (a nil value) I am sure after playing with it for a while I will get everything working properly, but would anyone have some information to point me in the right direction? Thank you in advance

3 4

Registration Failed with status Method Not Allowed [405]
by Ave ebock 25 Aug '14

25 Aug '14

Hi, Please im trying to register a gateway that uses IP Authentication. I've added the IP address of my freeswitch to my service provider and i have this in my /sip_profiles/external/vb.xml <include> <gateway name="vb"> <param name="register" value="false"/> <param name="username" value="username"/> <param name="password" value="password"/> <param name="proxy" value="108.59.2.133"/> <param name="realm" value="108.59.2.133"/> <param name="expire-seconds" value="600"/> <param name="retry-seconds" value="30"/> <param name="ping" value="25"/> </gateway> </include> when i do sofia profile external register vb, i get an error vb Registration Failed with status Method Not Allowed [405] Please what might i be doing wrong I have other providers that do not use IP authentication and i've got no issue with them. Thank you

2 1

Fwd: mod_python always gives an error at first dialplan call
by Nuno Reis 25 Aug '14

25 Aug '14

Hi guys. I know I've already asked this on the freeswitch-dev mailing list but since i still didn't get an answer, i'm sending it again, this time to the freeswitch-users ML too. I'm experiencing a weird behavior with the new FS 1.4. Everytime i call a python script in the dialplan after a reboot i always got an error similar to this: 2014-08-18 07:03:26.341145 [ERR] mod_python.c:293 Error calling python script 2014-08-18 07:03:26.341145 [ERR] mod_python.c:164 Python Error by calling script "stable.disa": <type 'exceptions.AttributeError'> Message: 'PySwigObject' object has no attribute 'sleep' This only happens with the first call after a restart. After that everything works fine. I never saw this in FS 1.2 This seem to happen only the first time mod_python is invoked and *session* object is used, no mater the script.The other python scripts will work after one (anyone) is used. As said before, after *session* object is accessed once, after a restart (giving back the error), everything starts working again. Any ideas on why? Thanks. *Note:* I'm using FS Version 1.4.8 64bit -- *Nuno Miguel Reis* | *Unified Communication** Systems* M. +351 913907481 | nreis(a)wavecom.pt WAVECOM-Soluções Rádio, S.A. Cacia Park | Rua do Progresso, Lote 15 3800-639 AVEIRO | Portugal T. +351 309 700 225 | F. +351 234 919 191 *GPS <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* [image: Description: Description: WavecomSignature] <http://www.wavecom.pt/pt/wavecom/premios.php> [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php> ---------- Forwarded message ---------- From: Nuno Reis <nreis(a)wavecom.pt> Date: Mon, Aug 18, 2014 at 7:12 AM Subject: mod_python always gives an error at first dialplan call To: freeswitch-dev(a)lists.freeswitch.org Hi guys. -- *Nuno Miguel Reis* | *Unified Communication** Systems* M. +351 913907481 | nreis(a)wavecom.pt WAVECOM-Soluções Rádio, S.A. Cacia Park | Rua do Progresso, Lote 15 3800-639 AVEIRO | Portugal T. +351 309 700 225 | F. +351 234 919 191 *GPS <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* [image: Description: Description: WavecomSignature] <http://www.wavecom.pt/pt/wavecom/premios.php> [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php>

3 4

(no subject)
by Denis Papes 25 Aug '14

25 Aug '14

Hi, I installed clean Debian 7 and executed remote installation using RockSolidPBX. Installation failed to change DHCP assigned address to static, so I did it manually. After that, FreeSWITCH installation passed flawlessly. After successfully creating user with extension 100, I created dialplan that should ring extension 100 when dialing number 123, but XML file it produced had an error: <include> <extension name="123"> <condition field="destination_number" expression="^(123)$"> <action application="export" data="dialed_extension=$1"/> .............. <action application="bridge" data="user/${dialed_extension}@ ${domain_name}"/> <action application="answer"/> <action application="sleep" data="1000"/> </condition> </extension> </include> It does not ring extension 100, but 123. Also, it would be great if it could create custom SIP gateways. Denis

2 1

Re: [Freeswitch-users] freeswitch stream remote audio file
by Snabel Kabiya 25 Aug '14

25 Aug '14

Hi, I used this encoding: URLEncoder.encode(url_parameters, "UTF-8"); to encode the URL parameters. here is the url i got: URL = http://storage.googleapis.com/myBucket/file.wav <http://storage.googleapis.com/myBucket/file.wav>? GoogleAccessId%3D703391026438d3tc85gd1jiu6f32mckumln3b2gc5qhk% 40developer.gserviceaccount.com%26 Expires%3D1408970638639%26 Signature%3DF3zM%2Fkr2mKqulgrdp1F6Q9Gdf5rKvy7GHrWOW5GMU xxxxxxxxxxxXxxxxxxXXXXXXXXjXtFFRBJp4a%2BfhrQJcrs4p%2FZhsSdB kyet8qVwf%2BRUN8I0ROA%2FNpJ%2B0T0eEBqP2PNFPHzI8GKQWm7wI6mmZDwKtgUT3A%2BVXGV74nUqHrNY%3D But now i get this exception: *2014-08-25 15:53:35.138408 [ERR] mod_httapi.c:2723 Error checking file cache (check permissions)* that's all i see in the logs...is this related to the file name size? is there a limitation or is it something else? Thanks, Snabel ---------- Forwarded message ---------- > From: Brian West <brian(a)freeswitch.org> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Cc: > Date: Mon, 25 Aug 2014 07:07:57 -0500 > Subject: Re: [Freeswitch-users] freeswitch stream remote audio file > Yes you should URL encode that. @ would become %40 > > > On Mon, Aug 25, 2014 at 2:02 AM, Snabel Kabiya <snabel(a)lexifone.com> > wrote: > >> Hi, >> >> i tried removing each parameter to see which one is causing the error. >> when i removed this parameter: >> >> GoogleAccessId=xxx-xxx(a)developer.gserviceaccount.com >> <http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…> >> >> freeswitch was able do download and play the file. are there characters >> in this parameter which are causing session:streamFile() failure? >> should i escape some characters? if so which and how? >> >> this parameter is mandatory so i can't just remove it from the link. any >> ideas how to solve this? >> >> Thanks, >> Snabel >> >> ---------- Forwarded message ---------- >> >>> From: Snabel Kabiya <snabel(a)lexifone.com> >>> To: freeswitch-users(a)lists.freeswitch.org >>> Cc: >>> Date: Mon, 25 Aug 2014 09:41:52 +0300 >>> Subject: Re: [Freeswitch-users] freeswitch stream remote audio file >>> Hi, >>> >>> i generated the link using the instructions here: >>> >>> https://developers.google.com/storage/docs/accesscontrol#Signed-URLs >>> >>> http://stackoverflow.com/questions/17508285/gae-application-needing-to-crea… >>> >>> But the link i generated is valid, I paste the signed URL into a web >>> browser and i downloaded the file. >>> that's why i think it's maybe a special characters issues. some >>> characters are causing the >>> session:streamFile() method to return this error. >>> >>> Thanks, >>> Snabel >>> >>> >>> //////////////////////////////////////////////////////////////////////////////////////// >>> >>> Hi, >>> >>> I'm saving the remote audio files on google cloud storage. i want to >>> play these files in freeswitch. >>> >>> when i use: mediaLink = "http://storage.googleapis.com/myBucket/file.wav"; >>> >>> >>> session:streamFile(mediaLink); >>> >>> *it works great.* >>> >>> But when i use signed urls >>> >>> mediaLink = " >>> http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…"; >>> session:streamFile(mediaLink); >>> >>> *i get this error:* >>> >>> *2014-08-24 20:42:48.770818 [ERR] mod_httapi.c:2696 File at url >>> [http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…] >>> <http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…]> is >>> unreachable!* >>> >>> >>> is there a special characters issue in the link? >>> >>> >>> Thanks, >>> Snabel >>> >>> ---------- Forwarded message ---------- >>> >>>> From: Yosi Taguri <yosi(a)taguri.com> >>>> To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> >>>> Cc: >>>> Date: Sun, 24 Aug 2014 21:29:27 +0300 >>>> Subject: Re: [Freeswitch-users] freeswitch stream remote audio file >>>> how did you generate the link? >>>> >>>> >>>> On Sun, Aug 24, 2014 at 9:00 PM, Snabel Kabiya <snabel(a)lexifone.com> >>>> wrote: >>>> >>>>> Hi, >>>>> >>>>> I'm saving the remote audio files on google cloud storage. i want to >>>>> play these files in freeswitch. >>>>> >>>>> when i use: mediaLink = " >>>>> http://storage.googleapis.com/myBucket/file.wav"; >>>>> >>>>> session:streamFile(mediaLink); >>>>> >>>>> *it works great.* >>>>> >>>>> But when i use signed urls >>>>> >>>>> mediaLink = " >>>>> http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…"; >>>>> session:streamFile(mediaLink); >>>>> >>>>> *i get this error:* >>>>> >>>>> *2014-08-24 20:42:48.770818 [ERR] mod_httapi.c:2696 File at url >>>>> [http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…] >>>>> <http://storage.googleapis.com/myBucket/file.wav?GoogleAccessId=xxx-xxx@deve…]> is >>>>> unreachable!* >>>>> >>>>> >>>>> is there a special characters issue in the link? >>>>> >>>>> >>>>> Thanks, >>>>> >>>>> Snabel >>>>> >>>>

1 0