- FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] Fetching SIP Header Variable
by msp 22 Aug '08

22 Aug '08

Hi all, The solution is to add prefix "X-" before any custom variable, and this to be done on SIP proxy who is passing the call to Freeswitch. On the receiving site at freeswitch, we need to use prefix "sip_h_X-" to fetch those variables. This configuration works fine on my systems, thats all. Thanks you all for kind replys, msp

1 0

Both phone rang, but no voice
by Adeel Ansari 22 Aug '08

22 Aug '08

Hi all, I have tried the command below, ==== originate sofia/gateway/gizmo1/01160176xxxxxx &bridge(sofia/gateway/gizmo2/01160122xxxxxx) ==== Its working, phone rang, but no voice. Am I missing something? Thanks. -- Best, Adeel Ansari http://www.linkedin.com/in/adeelansari

4 15

test message please ignore
by Ilan Perez 22 Aug '08

22 Aug '08

1 0

T1 RBS Support Revisited
by John Wehle 22 Aug '08

22 Aug '08

Anthony Minessale wrote: > It's more or less on hook and off hook and reading DTMF Hmmm ... I'm attempting to cobble together support and have hit a snag. Placing the channel off-hook and waiting for the wink is easier enough, however how do I sent the phone number? I believe e&m winkstart uses MF, * not * DTMF to send the phone number / extension ... at least my PBX doesn't respond when I send DTMF. Is there support in FreeSWITCH for MF? If not, then any pointers to how to go about adding support? -- John ------------------------------------------------------------------------- | Feith Systems | Voice: 1-215-646-8000 | Email: john(a)feith.com | | John Wehle | Fax: 1-215-540-5495 | | -------------------------------------------------------------------------

2 1

Custom events?
by James Green 21 Aug '08

21 Aug '08

I have noticed the wiki is pretty much non-existant on the subject of custom events. >From my understanding of the system thus far, I could create a number of custom events that my applications can react to and perform busienss logic. One specific example: I could connect to FS and fire an event "MYPROJECT::OUTBOUND_DIAL" which a separate application could listen for and process further. I might therefore have a chain of small apps developing these and reacting at various stages. Is my understanding correct? Can I therefore register an application to listen for MYPROJECT::MY_CUSTOM_EVENT and wait until another of my apps fires it? The next obvious question is how parameter handling works... But I shall try to walk before running... Thanks, James

4 6

Query regarding FreeSWITCH
by Gayatri Kulkarni 21 Aug '08

21 Aug '08

Hi guys, Is there a way FressSWITCH exposes its list of APIs to third party clients? As in, I have a client and I want to invoke a FreeSWITCH API - Is there anywhere my application can look into to find out what is the list of parameters required? What would a SIP request to FressSWITCH querying about the API name and it's respective parameterlist look like? Does FressSWITCH support such a request basically? - I suppose it does, it has all of it's data in XML format. What would the response be like? Thanks a million, Gayatri Kulkarni.

2 4

DNS SRV != ENUM
by Lee JJ 21 Aug '08

21 Aug '08

Hello Brian : >From the message http://lists.freeswitch.org/pipermail/freeswitch-users/2008-August/005544.h… >* *>>* It should not query ENUM first . *>>* 21 11.653138 210.2x.x.x -> 202.y.y.y DNS Standard query NAPTR *>>* 2.9.9.9.e164.org * *<--- this is ENUM way , if I want to call an old fashion "Telephone No" you can see the domain always go to "E164.ORG"* >Again you told it to go to enum... isn't that exactly what it should >do. Why would we do a srv before that unless I'm missing your point >here. http://www.voip-info.org/wiki-DNS+SRV A Domain Name Server (DNS) SRV record helps connecting to a SIP user in a similar way that an MX record helps email delivery. http://mit.edu/sip/sip.edu/dns.shtml For example sip:billing@voip.apnic.net <sip%3Abilling(a)voip.apnic.net> sip:0702058888@sip.ttn.net <sip%3A0702058888(a)sip.ttn.net> The pure dns query will get either an "A" record ;; QUESTION SECTION: ;voip.apnic.net. IN A ;; ANSWER SECTION: voip.apnic.net. 3600 IN A 203.119.0.97 or a "SRV" record ;; QUESTION SECTION: ;sip.ttn.net. IN SRV ;; ANSWER SECTION: sip.ttn.net. 3600 IN CNAME nusip1.gogotalk.net.tw. for openser example forward(destination) Forward the SIP request to the given destination in stateless mode. This has the format of [proto:]host[:port]. Host can be an IP or hostname; supported protocols are UDP, TCP and TLS. (For TLS, you need to compile the TLS support into core). If proto or port are not specified, NAPTR and SRV lookups will be used to determine them (if possible). http://www.opensips.org/index.php?n=Resources.DocsCoreFcn#parameters for Asterisk sip.conf example srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet So they are totally different !

3 2

one-port FXO for home - recommendations?
by Alex Kinch 21 Aug '08

21 Aug '08

One of my neighbours wants to play with FS, and connect his existing analogue PSTN line to it. What would anyone here recommend to do this? Cheap and easy to configure as possible.. don't need a T1/E1 card or anything silly :) Alex

5 5

Re: [Freeswitch-users] mod_perl buid errors on Solaris
by Michael Jerris 21 Aug '08

21 Aug '08

I was talking about the perl one. The libtool archive one i think is already addressed on the wiki where we explain how to use jds-cbe. Mike On Aug 21, 2008, at 11:45 AM, Bruce McAlister wrote: > Hi Mike, > > Which error are you referring to, mod_perl or the invalid libtool > archive? > > Thanks > Bruce > > -----Original Message----- > From: freeswitch-users-bounces(a)lists.freeswitch.org > [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of > Michael > Jerris > Sent: 21 August 2008 16:28 > To: freeswitch-users(a)lists.freeswitch.org > Subject: Re: [Freeswitch-users] mod_perl buid errors on Solaris > > Please open up a bug on http://jira.freeswitch.org on this. We have > this reproduced on the build servers now and we are looking to resolve > this. > > Mike > > > On Aug 21, 2008, at 5:40 AM, Bruce McAlister wrote: > >> Hi, >> >> I tried to build FreeSWITCH 1.0.1 using GCC versus Sun Studio 12 and >> the >> build does not get very far. I now am faced with the following error >> using >> GCC: >> >> /bin/bash ./libtool --mode=link gcc -g -O2 -I. -I. -o pcregrep >> pcregrep.o >> libpcre.la >> gcc -g -O2 -I. -I. -o pcregrep pcregrep.o ./.libs/libpcre.a >> g++ -c -g -O2 -I. -I. -DPOSIX_MALLOC_THRESHOLD=10 ./pcrecpp.cc - >> fPIC -DPIC >> -o pcrecpp.o >> g++ -c -g -O2 -I. -I. -DPOSIX_MALLOC_THRESHOLD=10 ./pcre_scanner.cc >> -fPIC >> -DPIC -o pcre_scanner.o >> g++ -c -g -O2 -I. -I. -DPOSIX_MALLOC_THRESHOLD=10 ./ >> pcre_stringpiece.cc >> -fPIC -DPIC -o pcre_stringpiece.o >> rm -f libpcrecpp.la >> /bin/bash ./libtool --mode=link g++ -I. -I. -rpath /opt/freeswitch/ >> lib >> libpcre.la -version-info \ >> '0:0:0' -o libpcrecpp.la pcrecpp.lo pcre_scanner.lo >> pcre_stringpiece.lo >> libtool: link: `/usr/sfw/lib/libstdc++.la' is not a valid libtool >> archive >> >> Would you like me to send in a copy of scope.h for you to have a >> look at? >> >> >> -----Original Message----- >> From: freeswitch-users-bounces(a)lists.freeswitch.org >> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of >> Andy >> Spitzer >> Sent: 18 August 2008 19:41 >> To: freeswitch-users(a)lists.freeswitch.org >> Subject: Re: [Freeswitch-users] mod_perl buid errors on Solaris >> >> Woof! >> >> On Mon, 18 Aug 2008 14:25:45 -0400, Bruce McAlister >> <bruce.mcalister(a)blueface.ie> wrote: >>> Does anyone have any idea's on the error listed below? >> >>> /opt/SUNWspro/bin/cc -w -DMULTIPLICITY -D_LARGEFILE_SOURCE >>> -D_FILE_OFFSET_BITS=64 -D_TS_ERRNO >>> -I/usr/perl5/5.8.4/lib/i86pc-solaris-64int/CORE -DEMBED_PERL >>> -I/export/home/vzhsxn/packages/BUILD/freeswitch-1.0.1/src/include >>> -I/export/home/vzhsxn/packages/BUILD/freeswitch-1.0.1/libs/ >>> libteletone/src >>> -KPIC -DPIC -DPATH_MAX=2048 -g -v -Xc -xc99=all -D_GNU_SOURCE >>> -DHAVE_CONFIG_H -c -o perlxsi.o perlxsi.c >>> >>> "/usr/perl5/5.8.4/lib/i86pc-solaris-64int/CORE/scope.h", line 221: >>> syntax >>> error before or at: sigjmp_buf >> >> Just a guess (from previous solaris experience), that somewhere in >> the >> perlxsi.c file, there is an include that is re-defining a symbol >> used in >> scope.h. I don't have access to scope.h here to see what it is >> complaining >> about, but that is where I'd look. >> >> Another thing to try would be use gcc instead of Sun's >> compiler...see if >> that makes a difference or changes the error message to something a >> bit more >> useful. >> >> --Woof! >> >> _______________________________________________ >> Freeswitch-users mailing list >> Freeswitch-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> _______________________________________________ >> Freeswitch-users mailing list >> Freeswitch-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org

2 1

sip_auto_answer
by Jonas Gauffin 21 Aug '08

21 Aug '08

Hello Is it possible to use sip_auto_answer when sending an originate command through the event socket? Regards, Jonas

2 2