- FreeSWITCH-users - FreeSWITCH Mailing Lists

ODBC Multiple Active Result Set (MARS) Problem
by Enver Yılmaz 13 Feb '11

13 Feb '11

Hi, I'm using git head on windows 2008 r2 with sql 2008 r2. When I enable ODBC with SQLNCLI10 driver I experienced following problem ; 2011-02-11 20:45:52.556958 [CRIT] switch_odbc.c:280 The sql server is not responding for DSN FreeSWITCH [STATE: HY000 CODE 0 ERROR: [Microsoft][SQL Server Native Client 10.0]Connection is busy with results for another command ][244] Freeswitch running and after minutes stop with above error then quit. I try to narrow ODBC config and I found when I enable ODBC on multiple profiles of sofia then this happens. On single profile and core and bunch of other modules is working without error. As I understand, FS trying to query a resultset without closing previous one on same connection. MS has an option MARS (Multiple Active Result Set) on ODBC. If I enable MARS on ODBC then everything working but I'm not sure is this safe or not. MS Says MARS should not be enabled unless application specifically designed to work that way. http://msdn.microsoft.com/en-us/library/ms345109(v=sql.90).aspx So what is your opinion? Should I go with mars option? Is this deserve to go to jira? Thanks, Enver Yılmaz

1 0

DTMF issues
by A Brodskiy 13 Feb '11

13 Feb '11

I am trying to use RFC 2833 <http://tools.ietf.org/html/rfc2833> for DTMF with Freeswitch and tollfree termination providers like tollfreetollfree.comand others, however it only seem to work with 1-800 numbers not 866. InBand DTMF works perfectly, however I want to get 2833 working. Trying that with SJPhone direct connection to termination provider RFC DTMF works fine. So it seems that issue is with FreeSwitch, I also tried diffrent phone with FS X-Lite and Pap2T and both have problems. I collected tcpdump captures and i dont see any issues on the wire that is DTMF are being send and decodded by wireshark as they go to provider. I am really lost for solution, Please Help. Thank you, Alex.

1 0

mod_distributor, lua and loop
by David Villasmil 13 Feb '11

13 Feb '11

Hello All, from a lua script, i'm executing the following: session:execute("bridge","sofia/gateway/${distributor(" .. route_name .. ")}".. out_number .."") but the call doesn't falls to the next gw, i'm trying to add the loop="3" to the bridge but it doesn't work. I've trued like this: session:execute("set","loop=\"3\"") session:execute("bridge","sofia/gateway/${distributor(" .. route_name .. ")}".. out_number .."") and session:execute("bridge","sofia/gateway/${distributor(" .. route_name .. ")}".. out_number .." loop=\"3\"") and session:execute("bridge","{loop=\"3\"}sofia/gateway/${distributor(" .. route_name .. ")}".. out_number .."") Still nothing... any thoughts? Thanks David

3 6

dp_tools/set- not worked SOMETIMES
by Ruslan Bukin 13 Feb '11

13 Feb '11

Application set is not set parameters SOMETIMES for example, before bridge I set my static parameters: <action application="set" data="my_own_parameter=test"/> <action application="set" data="nibble_rate=1"/> ... sometimes (in about ~1-5% times) one of them is not set up. I tried to set like this before bridge: <extension name="set_var" continue="true"> <condition field="${my_own_parameter}" expression=".+" break="on-true"/> <condition field="destination_number" expression="(777)" break="on-true"> <action application="set" data="my_own_parameter=test"/> <action application="transfer" data="$1 XML public"/> </condition> </extension> but no result: after bridge no parameter to read (SOMETIMES) any recommendations? -Ruslan

2 5

mod managed install
by budi wibowo 13 Feb '11

13 Feb '11

hi i have mono installed using yum following http://stackoverflow.com/questions/3510320/install-mono-on-centos5-5-using-… when i install mod_managed i got this making all mod_managed Package mono was not found in the pkg-config search path. Perhaps you should add the directory containing `mono.pc' to the PKG_CONFIG_PATH environment variable No package 'mono' found Package mono was not found in the pkg-config search path. Perhaps you should add the directory containing `mono.pc' to the PKG_CONFIG_PATH environment variable No package 'mono' found Compiling freeswitch_managed.cpp... g++ -I/usr/local/src/freeswitch-1.0.7/src/include -I/usr/local/src/freeswitch-1.0.7/src/include -I/usr/local/src/freeswitch-1.0.7/libs/libteletone/src -fPIC -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -O2 -D_GNU_SOURCE -DHAVE_CONFIG_H -c -o freeswitch_managed.o freeswitch_managed.cpp In file included from freeswitch_managed.cpp:35: freeswitch_managed.h:43:18: error: glib.h: No such file or directory freeswitch_managed.h:44:26: error: mono/jit/jit.h: No such file or directory freeswitch_managed.h:45:36: error: mono/metadata/assembly.h: No such file or directory freeswitch_managed.h:46:39: error: mono/metadata/environment.h: No such file or directory freeswitch_managed.h:47:39: error: mono/metadata/mono-config.h: No such file or directory any parameter i need to change? thx budi wibowo <http://stackoverflow.com/questions/3510320/install-mono-on-centos5-5-using-…>

1 0

Passing custom variables for managed code in xml_curl
by Ashley B 13 Feb '11

13 Feb '11

Hi How do I set my own global vars (X-PRE-PROCESS) using mod_xml_curl that I can use in managed code / script?). Eg mod_managed does not always have the values of the variables required @ runtime, they are always changing. I have to curl them from another server, i know i can set them up as channel variables when calling for dial plan with xml_curl but need to be able to fetch them @ the same time as configuration when calling reloadxml. Any assistance is appreciated. Thanks Ashley

1 0

How to set up a DTMF callback in C or C#?
by Frankie Yiu 12 Feb '11

12 Feb '11

Hi there, If I want to set up a DTMF callBack to a function (in either C or C#) when a caller presses a key, what function should I use to set it up? Thanks, Frankie

3 2

can't email voicemail messages
by Roger Young 12 Feb '11

12 Feb '11

Outbound mail is rejected because the "from" address is "1000@localcomputername". Voicemail messages are sent using the sendmail command. The mailer is actually postfix. I have set vm_mailfrom and email_from both to "workingmail(a)realdomain.com" both in conf/directory/default/1000.xml and conf/autoload_configs/voicemail.conf.xml. I have changed the voicemail.tpl so it has the literal, correct sender address. I have tried to change the "mailer-app-args" in conf/autoload_confings/switch.conf.xml to include a " -f workingmail(a)realdomain.com ". All of this is ignored, and "1000@computername" appears as the from address in the rejection notices. Can anybody point me to the correct way to set the "from" address so it is actually applied to outbound emails? The sendmail command works fine from the command line. This is my first post. Let me know if I am not following the rules. Thanks, Roger Young

2 1

call getting hangup after git update
by ovvenkat 12 Feb '11

12 Feb '11

Hi, Today, I have updated freeSwitch to latest git. After that, When I am trying to do outbound call, Call is getting hangup. When I check the fs_cli logs, its showing that, *mod_dptools.c:2610 Originate Failed. Cause: NO_ROUTE_DESTINATION* Here is the logs for the same http://pastebin.freeswitch.org/14951 I have added STD code , before the number, Still no luck. I am getting error like *Originate Failed. Cause: NORMAL_UNSPECIFIED* Here is the log after adding STD code http://pastebin.freeswitch.org/14952 Regards, Venkat. -- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV.

3 6

Re: [Freeswitch-users] How to set up a DTMF callback in C or C#?
by Kris 12 Feb '11

12 Feb '11

I'll try to put it on the list again. I don't use any of those functions, but there is a way to do it somehow with delegates(the C# pointers). I use the API like this. I don't know much..3 months ago I didn't know anything about C# or FreeSwitch. Just have to read and try things since there aren't many C# examples out there. FreeSWITCH.Native.Api fsApi = new FreeSWITCH.Native.Api(); string filename; filename = @"E:\LiveMatch\Sounds\en\us\female\conference\conf-help_menu.vox"; fsApi.Execute("uuid_displace", ev_all.GetHeader("Caller-Unique-ID") + " start " + filename + " 10 mux"); ----- Original Message ----- From: "Frankie Yiu" <yky1628(a)yahoo.com> To: <kris(a)livecall.com> Sent: Friday, February 11, 2011 7:03 PM Subject: Re: [Freeswitch-users] How to set up a DTMF callback in C or C#? Thanks for your reply earlier, it works. For some reason, I can not reply the thread so I send you this message privately. Since you might know about using C# w/ FreeSwitch, I might ask you this: 1) If I want to use the Media bugs, how can I do this in C#? I see a method that I want to use in swig.cs: "switch_core_media_bug_add", but what is the parameters for the call back function? >From the definition in switch_types.h: switch_bool_t (*switch_media_bug_callback_t) (switch_media_bug_t *, void *, switch_abc_type_t); but what is it in C# since it does not have pointers? 2) I see that some functions have type like this "SWIGTYPE_p_p_ ..." (for example: SWIGTYPE_p_p_switch) , do these type really work (expecially for those pointer to pointer type in C/C++)? I tried to call: "switch_core_session_read_frame(SWIGTYPE_p_switch_core_session session, SWIGTYPE_p_p_switch_frame frame, uint flags, int stream_id) " but seem like when I pass in a variable for frame, when the program gets to freeswitch_wrap.cxx side, it lost its frame's memory address/place holder. Am I doing something wrong? Thanks in advance. Frankie ____________________________________________________________________________________ Bored stiff? Loosen up... Download and play hundreds of games for free on Yahoo! Games. http://games.yahoo.com/games/front

1 0