- FreeSWITCH-users - FreeSWITCH Mailing Lists

503 Maximum Calls In Progress
by Gary Chen 11 Feb '11

11 Feb '11

FreeSWITCH Version 1.0.7 (hacked-20110119T213949Z) I have a freeswitch installed for testing. It just up for about an hour and there are two Cisco 7960 phones registered. After made several test calls between these two Cisco phones, FS stop working and give me these message on fs_cli: 2011-02-11 17:39:58.691008 [CRIT] switch_core_session.c:1629 The system cannot create any sessions at this time. In the SIP header it shows: 503 Maximum Calls In Progress What should I do to fix this? Here is the message by press F2, F3 and F4: F2: freeswitch@internal> status UP 0 years, 0 days, 1 hour, 12 minutes, 55 seconds, 590 milliseconds, 20 microseconds 39 session(s) since startup 0 session(s) 0/30 1000 session(s) max min idle cpu 0.00/100.00 F3: freeswitch@internal> show channels 0 total. F4: freeswitch@internal> show calls 0 total. Gary

2 1

Can XML CDR Timestamps Be UTC?
by Jerry Richards 11 Feb '11

11 Feb '11

Hello All, Is there a way to configure Freeswitch to indicate UTC (instead of local time) in the XML CDR files? Thanks, Jerry

2 1

double instance at relaodxml
by Madovsky 11 Feb '11

11 Feb '11

sometimes when I run from fs_cli "reloadxml" I notice 2 instances of FS so the last instance log mod_event socket error , could not listen to socket.... thanks

2 1

Yet another DTMF question
by Travis Stutsman 11 Feb '11

11 Feb '11

I've looked through a lot of threads regarding DTMF troubles, but none of them seem to relate to me. I've just pulled a fresh copy of the freeswitch source and compiled it and I cannot get my digits recognized - neither in-band nor out-of-band. I haven't messed with INFO yet as my phones don't support it. I've done packet captures on my local interface and on the server's interface and I can see the RTP rfc2833 digits showing up, but freeswitch completely ignores them. I feel like I must be overlooking something horribly obvious. How can this be? Any hints guys? Thanks in advance!

3 11

expr()
by Madovsky 11 Feb '11

11 Feb '11

Is the greater lower sign available in expre() api ? I tried <condition field="${cond(expr(${myvar} > 0.01) ? YES : NO)}" expression="^YES$"> but retuns always yes.... thanks

1 1

OSTAG FB Page
by Michael Collins 10 Feb '11

10 Feb '11

Hello all! For those of you on Facebook please go make a new friend: http://www.facebook.com/pages/Open-Source-Telephony-Advancement-Group-Inc/1… This is our official OSTAG Facebook page. :) -Michael

1 0

FS cluster support of contact center.
by jesse 10 Feb '11

10 Feb '11

FreeSWITCH does not share the state of FIFO across multiple instances, neither does mod_callcenter. do we have any config example about how to implement ACD in a FS cluster? thanks!

1 0

invalid XML / mod_xml_cdr
by Ruslan Bukin 10 Feb '11

10 Feb '11

Mod_xml_cdr sometimes send invalid XML, smth like: <read_codec>G729</read_codec> <1>8000</1> <write_codec>G729</write_codec> <write_rate>8000</write_rate> or <signal_bridge>true</signal_bridge> <01>e6c45b44-1535-e011-a46e-001e8c44b22f</01> <endpoint_disposition>ANSWER</endpoint_disposition> any recommendations? I am using freeswitch latest git on freebsd8 thanks -Ruslan

2 3

switch.conf.xml port range
by Madovsky 10 Feb '11

10 Feb '11

in port range settings is it mean that RTP sockets are created on localhost IP ? if yes, how can I change the IP to 127.0.0.6 for example ? thanks

3 3

mod_distributor
by David Villasmil 10 Feb '11

10 Feb '11

Hello Guys, The was I use bridgeis like the following from a lua script: session:execute("bridge","{sip_auth_username=1234,sip_auth_password=1234}sofia/external/5551234566@1.2.3.4:5060") This is because i don't want tothe xml files, i want to do it programmatically. Lets say i have 3 different gateways i want to use in a round-robin basis. Normally, i would need to DEFINE 3 gateways in the xml profiles, then define mod_distributor by creating a "list" and then use it like: session:execute("bridge","sofia/external/${destination_number}@${distributor(distributor_list)}") but i would like to define the "distributor_list" when creating the bridge, is this possible? Thanks all David

2 1