- FreeSWITCH-users - FreeSWITCH Mailing Lists

ESL Outbound: how to bridge media?
by Stephen Wilde 16 Feb '11

16 Feb '11

The problem I have is to propagate the audio coming from an "originated" outbound session to the inbound session when the outbound is in the PROGRESS MEDIA phase. When my application receives the "CHANNEL_PROGRESS_MEDIA" event from outbound session I can do a "pre_answer" on inbound session but I'm not capable to do an audio bridge. I have tried with "uuid_bridge <outbound_uuid> <inbound_uuid>" with no result probably because this api requires that at least one session must be answered. I don't want to answer to the inbound session to propagate the outbound progressing media but I want to answer to inbound only on outbound answer. Any way to do that? Stephen

3 18

Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 56, Issue 177
by Javier Gallart 15 Feb '11

15 Feb '11

Anthony, thanks for the tip. I haven't seen any change though. I should have mentioned that I'm focusing in the rtp stream coming form the callee to the caller. The problem is that FS relays to the caller only half of the packets received from the callee. The packets arrive at FS at a rate of 1 packet every 20 ms, and with a payload of 20 bytes each. Packets from FS to the caller are sent every 40 ms with a payload of 20 bytes, thus skipping half of the information. Thanks > > ---------- Forwarded message ---------- > From: Anthony Minessale <anthony.minessale(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Date: Mon, 14 Feb 2011 10:38:57 -0600 > Subject: Re: [Freeswitch-users] g729 packets skipped in passthrough mode > I bet its 20ms vs 30 > set passthru_ptime_mismatch to true either in vars.xml or in your > dialplan both legs through export on the a leg or set in the a leg and > in the {} on b. > > > On Mon, Feb 14, 2011 at 10:28 AM, Brian West <brian(a)freeswitch.org> wrote: > > What exactly is the problem? I see no issue here can you elaborate on > what you're seeing? > > > > /b > > > > On Feb 14, 2011, at 4:48 AM, Javier Gallart wrote: > > > >> I've tried to explicitly set ptime at 20ms at switch.conf -although it's > not necessary afaik-. Has any one experienced this same issue? > >> > >> Thanks in advance.. > >> > >> Regards > > > > > > _______________________________________________ > > FreeSWITCH-users mailing list > > FreeSWITCH-users(a)lists.freeswitch.org > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > > http://www.freeswitch.org > > > > > > -- > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > Twitter: http://twitter.com/FreeSWITCH_wire > > AIM: anthm > MSN:anthony_minessale@hotmail.com > GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com > IRC: irc.freenode.net #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org > googletalk:conf+888@conference.freeswitch.org > pstn:+19193869900 > > > > >

2 1

Getting SIP trace on user level
by Aloysius Lloyd 15 Feb '11

15 Feb '11

Hi All, Is there any console command available to get SIP trance on user level . Equivalent to Asterisk "sip set debug peer <peername>" TIA Lloyd

4 5

Fail2ban for Windows?
by Jack Loranger 15 Feb '11

15 Feb '11

Is there a Fail2ban type solution for windows? Thanks, Jack

1 0

Alarm Conditions
by Tim King 15 Feb '11

15 Feb '11

I am looking for a way to gather the information in the following list so I may utilize it to set alarm conditions. Can someone please let me know a good method for gathering this information or if perhaps there is a newer module for reporting alarms that I am not aware of. Thanks - Tim · CDR Failed to write/send · Call Failure · H323 Gatekeeper registration error · Number of Active calls · Active Calls based on trunk · No route for call · SIP Error Codec Translation error

2 1

Lua API broken???
by Yehavi Bourvine 15 Feb '11

15 Feb '11

Hello, There is a problem with of our LUA scripts which started with GIT of a about a week ago. From the dialplan I call a LUA script which does the following (stripped down just to show the problem): local api = freeswitch.API(); local isShared = api:execute("user_data", "86111 var SharedLine"); It causes Freeswitch to do segmentation fault, sometimes with an error about double free call. If I take the orignal script and remove the api:execute() calls it works fine. Is it some known problem/change in the API, or shall I open a JIRA for it? Thanks, __Yehavi:

3 2

Simultaneous ring out (external)
by Frank Park 15 Feb '11

15 Feb '11

Hello, Yet another puzzle I've been trying to resolve. I have been trying to implement a simultaneous ring group that calls multiple external phone numbers (ie cellphones). Similar to call group, first person who answers gets the bridging. Bridge with commas works well for internal extensions and call groups, but it seems like it doesn't like multiple external legs. Should I be using something else besides bridge function? Thank you, Frank -- ----=======================---- Frank Park Telonium Communications, LLC frank(a)telonium.com http://www.telonium.com Follow Us on Twitter: @GetTelonium 404-566-8888 x1001 Office 404-939-4242 Cell ----=======================----

3 3

Cisco Call Manager question
by Mitch Johnson 15 Feb '11

15 Feb '11

Has anyone connected a Freeswitch PBX to a Cisco CalManager, version 7 and above? I need to send all digits down to the callmanager that do not reside on the switch. I assume I have to have a SIP trunk between the two and then include a dial plan reference to send all digits down the trunk. I've just started working with FreeSwitch, so excuse my ignorance, Thanks, Mitch Johnson

2 1

ESL: how to filter two uuid's?
by Stephen Wilde 15 Feb '11

15 Feb '11

If I have 2 uuid (uuid_inbound and uuid_outbound) in an ESL socket outbound application, there is a way to filter events related to this two uuid? If I try to do: connection.filter("unique-id", uuid_inbound); connection.filter("unique-id", uuid_outbound); it seems that the second filter overwrite the first one and my application receives only uuid_outbound related events. I have tried also an: connection.filter("unique-id", uuid_inbound + "|" + uuid_outbound); but in this way no event are received. There is a way to filter 2 specific uuid's or I have to receive all events and implement the filtering in my ESL application? Stephen

3 3

INFORMATION: FreeSWITCH Training, West Coast
by Michael Collins 15 Feb '11

15 Feb '11

This is a reminder for those who are interested in the FreeSWITCH Bootcamp put on by the 2600hz project. There are two upcoming training sessions, both on the west coast of the USA: Mar 9-11, San Francisco May 11-13, Seattle The complete list is available at: http://www.voipkb.com/ There are a few international training sessions that will be happening later in the year, so check the VoIPKB site for updates. Thanks to all those who are promoting the use of FreeSWITCH around the world! -Michael

1 0