- FreeSWITCH-users - FreeSWITCH Mailing Lists

Using txfax from a LUA script
by Luis F Urrea 14 Apr '11

14 Apr '11

Hi all, I noticed that I am not able to use TXFAX from a LUA script as follows: obSession = freeswitch.Session("freetdm/1/1/9999") if obSession:ready() then session:execute("txfax", "/rxfax.tiff") else My objective was to send a fax to a fax machine connected to an FXS. I does work when I use: originate freetdm/1/1/9999 &txfax(/rxfax.tiff) But I wanted to be able to retry based on DISCONNECT CAUSES and the like. Just for peace of mind I wanted to get some input from you on the causes of this "limitation", and maybe get some suggestions as to any other options? TIA

2 2

"Nets" Capability
by mike petty 14 Apr '11

14 Apr '11

I have a quick question regarding freeswitch’s capabilities. I’ve downloaded it and am diving into it right now. One part of the functionality that I’m looking for is something like radio nets. In this scenario, there would be multiple “nets” or conference room-like channels, and the user would essentially be in all of them, but be able to set talk/listen capabilities on each individually. For instance, you might have a “Master Coordination Net” a “Troubleshooting Net” and a “Local Area Net”. The user would be in all of those, and set Listen on all, or some of the nets, but only talk on the “Troubleshooting Net”, but then would like to talk on Master Coord and Local Area, so he would set talk on both of those and his voice would go out to just those listening on those two nets? Most of the users would be SIP clients, but some would be coming in off of PSTN and other interfaces. It seems like this should be possible, but right now I’m sorting through all of the different modules and settings and everything, and am really starting to wonder if this is possible or not. Eventually, my plan would be to move the Talk/Listen status to external push button switches that I read in via some digital inputs, and then I would write a little program to set the talk/listen based upon the button status to provide a control panel type of interface for a user. Thanks. Freeswitch looks amazing so far, and so much more intuitive than Asterisk! Mike

2 1

Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 58, Issue 92
by uttampegu＠gmail.com 14 Apr '11

14 Apr '11

Is there any easy step by step guide to configure freeswitch work a inbound IVR ? Regards Uttam Sent from BlackBerry® on Airtel -----Original Message----- From: freeswitch-users-request(a)lists.freeswitch.org Sender: freeswitch-users-bounces(a)lists.freeswitch.org Date: Thu, 14 Apr 2011 20:08:54 To: <freeswitch-users(a)lists.freeswitch.org> Reply-To: freeswitch-users(a)lists.freeswitch.org Subject: FreeSWITCH-users Digest, Vol 58, Issue 92 Send FreeSWITCH-users mailing list submissions to freeswitch-users(a)lists.freeswitch.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-users or, via email, send a message with subject or body 'help' to freeswitch-users-request(a)lists.freeswitch.org You can reach the person managing the list at freeswitch-users-owner(a)lists.freeswitch.org When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-users digest..."

2 1

Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 58, Issue 92
by dave＠dchorton.com 14 Apr '11

14 Apr '11

Sent from my HTC Inspire™ 4G on AT&T ----- Reply message ----- From: freeswitch-users-request(a)lists.freeswitch.org To: <freeswitch-users(a)lists.freeswitch.org> Subject: FreeSWITCH-users Digest, Vol 58, Issue 92 Date: Thu, Apr 14, 2011 12:08 pm Today's Topics: 1. Re: fax and jpg to tiff (Steve Underwood) 2. Re: proxy SDP (Madovsky) 3. Re: fax and jpg to tiff (Madovsky)

1 0

Antw.: fax and jpg to tiff
by Michal Bielicki 14 Apr '11

14 Apr '11

Danke für die Information Gesendet mit meinem HTC ----- Reply message ----- Von: "Madovsky" <infos(a)madovsky.org> An: "FreeSWITCH Users Help" <freeswitch-users(a)lists.freeswitch.org> Betreff: [Freeswitch-users] fax and jpg to tiff Datum: Do., Apr. 14, 2011 18:29 Steve the link below is the same thread you had with callweaver http://www.mail-archive.com/callweaver-users@callweaver.org/msg01241.html thanks ----- Original Message ----- From: "Steve Underwood" <steveu(a)coppice.org> To: "FreeSWITCH Users Help" <freeswitch-users(a)lists.freeswitch.org> Sent: Thursday, April 14, 2011 11:59 AM Subject: Re: [Freeswitch-users] fax and jpg to tiff > Hi Madovsky, > > The standard width for a normal sized fax, whether it is standard, fine > or super-fine resolution length-wise, is 1728 pixels. Wider faxes (e.g. > A3) are possible, but it is rare to find a machine which supports them. > > Steve > > > On 04/14/2011 11:20 PM, Madovsky wrote: >> Hi Steve, >> >> if you talk about this line >>> Image width (200 pixels) not an acceptable FAX image width >> I tried many different size but it says always the same. >> what image width is acceptable usually ? >> >> Thanks >> >> ----- Original Message ----- >> From: "Steve Underwood"<steveu(a)coppice.org> >> To: "FreeSWITCH Users Help"<freeswitch-users(a)lists.freeswitch.org> >> Sent: Thursday, April 14, 2011 9:25 AM >> Subject: Re: [Freeswitch-users] fax and jpg to tiff >> >> >>> Hi Madovsky, >>> >>> Your log says very clearly what is wrong with the file you are trying to >>> send. What further information are you looking for? >>> >>> Steve >>> >>> >>> On 04/14/2011 12:05 PM, Madovsky wrote: >>>> is there the spandsp log >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ...0= Store and forward Internet fax (T.37): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... .0..= Real-time Internet fax (T.38): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... 0...= 3G mobile network: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ..0. ....= V.8 capabilities: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .0.. ....= Preferred octets: 256 octets >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ...0= Ready to transmit a fax document (polling): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ..1.= Can receive fax: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ..10 11..= Supported data signalling rates: V.27 ter, V.29, and V.17 >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> 1... ....= 2-D coding: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ..00= Recording width: 215mm +- 1% >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... 10..= Recording length: Unlimited >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .111 ....= Receiver's minimum scan line time: 0ms at 3.85 l/mm; T7.7 = >>>> T3.85 >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> 1... ....= Extension indicator: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ..0.= Compressed/uncompressed mode: Compressed >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... .0..= Error correction mode (ECM): Non-ECM >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .0.. ....= T.6 coding: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> 1... ....= Extension indicator: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ...0= "Field not valid" supported: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ..0.= Multiple selective polling: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... .0..= Polled sub-address: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... 0...= T.43 coding: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ...0 ....= Plane interleave: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ..0. ....= Voice coding with 32kbit/s ADPCM (Rec. G.726): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .0.. ....= Reserved for the use of extended voice coding set: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> 1... ....= Extension indicator: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ...1= R8x15.4lines/mm: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ..0.= 300x300pels/25.4mm: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... .0..= R16x15.4lines/mm and/or 400x400pels/25.4mm: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... 0...= Inch-based resolution preferred: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ...1 ....= Metric-based resolution preferred: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ..0. ....= Minimum scan line time for higher resolutions: T15.4 = T7.7 >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .0.. ....= Selective polling: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> 1... ....= Extension indicator: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ...1= Sub-addressing: Set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... ..0.= Password: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .... .0..= Ready to transmit a data file (polling): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ...0 ....= Binary file transfer (BFT): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> ..0. ....= Document transfer mode (DTM): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> .0.. ....= Electronic data interchange (EDI): Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> 0... ....= Extension indicator: Not set >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Selected compression T.4 2-D (2) >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Trying to send file '/1302753792.tiff' >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Start sending document >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Minimum bits per row will be 0 >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Starting page 1 of transfer >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Image width (200 pixels) not an acceptable FAX image width >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 The >>>> far end is incompatible >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Changing from state 18 to 3 >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Tx: DCN with final frame tag >>>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Tx: ff 13 fb >>>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> HDLC signal status is Carrier down (-1) in state 3 >>>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX >>>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set >>>> rx type 0 >>>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set >>>> tx type 4 >>>> 2011-04-14 00:03:31.624981 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Send complete in phase T30_PHASE_D_TX, state 3 >>>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Send complete in phase T30_PHASE_D_TX, state 3 >>>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Disconnecting >>>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Changing from phase T30_PHASE_D_TX to T30_PHASE_E >>>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set >>>> rx type 0 >>>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set >>>> tx type 1 >>>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Changing from state 3 to 2 >>>> 2011-04-14 00:03:32.704744 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 >>>> Send complete in phase T30_PHASE_E, state 2 >>>> >>>> ----- Original Message ----- >>>> *From:* Madovsky<mailto:infos@madovsky.org> >>>> *To:* freeswitch-users(a)lists.freeswitch.org >>>> <mailto:freeswitch-users@lists.freeswitch.org> >>>> *Sent:* Wednesday, April 13, 2011 11:33 PM >>>> *Subject:* fax and jpg to tiff >>>> >>>> sorry I don't have the personal email of >>>> Steve Underwood (I saw a thread of him related of this subject), >>>> it's about a problem >>>> of spandsp txfax and jpeg files. >>>> I didn't succeed to find the right conversion to make the far end >>>> accept the fax. >>>> I get always "far end cannot receive at the size of the image". >>>> this problems occurs only from jpeg to tiff conversion. >>>> I use imagemagick for that : >>>> sudo /usr/bin/convert -page Letter -density 204x196 -resize >>>> 1728x1184 -units pixelsperinch -monochrome -compress Fax >>>> <fileToConvert> <fileToSave> >>>> I tried numrous options but no luck. >>>> Thanks >>>> >>>> >>> >>> _______________________________________________ >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

Why the c program does not work?Event-Name is allways "SOCKET_DATA"
by Alex Zhou 14 Apr '11

14 Apr '11

Hi! I'm new user to freeswitch.I write a c program to dial and play a wav file. I want to know hangup-cause.But it does not work.The Event-Name i got is "SOCKET_DATA" not "CHANNEL_HANGUP". Can you help me to fix it and get hangup-cause? Then i will dial lot of number but only on work time (9:00-11:00,14:00-17:00).So I want to use crontab to send custom event to crotrol dial start or stop.So how to send and receive custom event ? Beside the crotab and custom event,any other better idea to control when to start or stop ? Thanks! #include <stdio.h> #include <stdlib.h> #include <esl.h> int main(void) { esl_handle_t handle = {{0}}; esl_status_t status1,status2,status3; int done = 0; esl_status_t status; time_t exp = 0; //esl_global_set_default_logger(7); status1 = esl_connect(&handle, "localhost", 8021, NULL, "ClueCon"); esl_events(&handle, ESL_EVENT_TYPE_PLAIN, "CHANNEL_ANSWER CHANNEL_ORIGINATE CHANNEL_HANGUP"); status2 = esl_send_recv(&handle, "api originate user/1001 &playback(/tmp/a.wav)\n\n"); if (handle.last_sr_event && handle.last_sr_event->body) { printf("Sucess --- %s\n", handle.last_sr_event->body); } else { // this is unlikely to happen with api or bgapi (which is hardcoded above) but prefix but may be true for other commands printf("Fail --- %s\n", handle.last_sr_reply); } while((status = esl_recv_event(&handle, 1,NULL)) != ESL_FAIL) { if (status == ESL_SUCCESS) { char *type = esl_event_get_header(handle.last_event, "content-type"); printf("--- %s\n", type); printf("--- %s\n",esl_event_get_header(handle.last_event, "Event-Name")); //next to get Hangup-Cause from Event-Name:CHANNEL_HANGUP } } esl_disconnect(&handle); return 0; } [freeswitch@fs ~]$ ./test Sucess --- +OK 3fe60603-0ed4-4a6d-9322-dd906433b3cc --- text/event-plain --- SOCKET_DATA --- text/event-plain --- SOCKET_DATA --- text/event-plain --- SOCKET_DATA --- text/event-plain --- SOCKET_DATA

1 0

Relay Proxy-Authentication requests to the caller
by Hamid Bilal 14 Apr '11

14 Apr '11

Hi All! I would like to know if there is a param we could set in sofia profile to let freeswitch relay Proxy-Authentication requests to the caller instead of absorbing it. Regards, Hamid

1 0

Unable to leave voicemail message longer than a few seconds
by Mark Campbell-Smith 14 Apr '11

14 Apr '11

HI! I am having an issue which must have been introduced at my last upgrade of FS (FreeSWITCH Version 1.0.head (git-b737851 2011-03-25 00-13-39 +0100)) Callers are unable to leave voicemail messages of any length; the voicemail application terminates the recording and transfers to the ivr. My dialplan is quite simple. Extract here: <action application="bridge" data="${group_extension}"/> <action application="set_user" data="${dialed_extension}@${domain}"/> <action application="answer"/> <action application="sleep" data="1000"/> <action application="voicemail" data="default ${domain_name} ${dialed_extension}"/> </condition> </extension> And the only place the message length value is defined is in voicemail.conf.xml in the autoloads conf directory. It is set to default. <param name="max-record-len" value="300"/> Below is an extract of the debug logs. I am only allowed to leave a message in this case for 6 seconds (between times 2011-04-13 21:26:41.098532 and 2011-04-13 21:26:47.37119) Dialplan: sofia/internal/1000(a)192.168.1.120 Action set(call_timeout=22) Dialplan: sofia/internal/1000(a)192.168.1.120 Action set(sip_contact_user=${caller_id_number}) Dialplan: sofia/internal/1000(a)192.168.1.120 Action export(sip_contact_user=${caller_id_number}) Dialplan: sofia/internal/1000(a)192.168.1.120 Action info() Dialplan: sofia/internal/1000(a)192.168.1.120 Action bind_meta_app(1 a s execute_extension::4001 XML default) Dialplan: sofia/internal/1000(a)192.168.1.120 Action bind_meta_app(3 b s execute_extension::cf XML features) Dialplan: sofia/internal/1000(a)192.168.1.120 Action bind_meta_app(2 a s execute_extension::checkpin XML features) Dialplan: sofia/internal/1000(a)192.168.1.120 Action bind_meta_app(9 b s record_session::/usr/local/freeswitch/recordings/${caller_id_number}.${strftime(%Y-%m-%d-%H-%M-%S)}.wav) Dialplan: sofia/internal/1000(a)192.168.1.120 Action bridge(${group_extension}) Dialplan: sofia/internal/1000(a)192.168.1.120 Action set_user(${dialed_extension}@${domain}) Dialplan: sofia/internal/1000(a)192.168.1.120 Action answer() Dialplan: sofia/internal/1000(a)192.168.1.120 Action sleep(1000) Dialplan: sofia/internal/1000(a)192.168.1.120 Action voicemail(default ${domain_name} ${dialed_extension}) : : 2011-04-13 21:26:29.611121 [DEBUG] switch_core_session.c:709 Send signal sofia/internal/1000(a)192.168.1.120 [BREAK] 2011-04-13 21:26:29.611121 [DEBUG] switch_channel.c:2813 (sofia/internal/ 1000(a)192.168.1.120) Callstate Change EARLY -> ACTIVE 2011-04-13 21:26:29.611121 [NOTICE] mod_dptools.c:929 Channel [sofia/internal/1000(a)192.168.1.120] has been answered EXECUTE sofia/internal/1000(a)192.168.1.120 sleep(1000) 2011-04-13 21:26:29.702581 [DEBUG] sofia.c:4744 Channel sofia/internal/ 1000(a)192.168.1.120 entering state [ready][200] 2011-04-13 21:26:29.758583 [DEBUG] switch_rtp.c:3082 Correct ip/port confirmed. EXECUTE sofia/internal/1000(a)192.168.1.120 voicemail(default markcs.dyndns.org 1000) 2011-04-13 21:26:30.750645 [DEBUG] switch_ivr_play_say.c:1291 Codec Activated L16@8000hz 1 channels 30ms 2011-04-13 21:26:40.050617 [DEBUG] switch_ivr_play_say.c:1635 done playing file 2011-04-13 21:26:40.050617 [DEBUG] switch_ivr_play_say.c:63 No language specified - Using [en] 2011-04-13 21:26:41.098532 [DEBUG] switch_ivr_play_say.c:581 Raw Codec Activated 2011-04-13 21:26:41.098532 [DEBUG] switch_core_codec.c:116 sofia/internal/ 1000(a)192.168.1.120 Push codec L16:70 2011-04-13 21:26:47.371195 [DEBUG] switch_core_codec.c:141 sofia/internal/ 1000(a)192.168.1.120 Restore previous codec PCMU:0. 2011-04-13 21:26:47.371195 [DEBUG] switch_ivr_play_say.c:63 No language specified - Using [en] 2011-04-13 21:26:47.418939 [DEBUG] switch_ivr_play_say.c:244 Handle play-file:[voicemail/vm-press.wav] (en:en) 2011-04-13 21:26:47.418939 [DEBUG] switch_ivr_play_say.c:1291 Codec Activated L16@8000hz 1 channels 30ms 2011-04-13 21:26:47.758529 [DEBUG] switch_ivr_play_say.c:1635 done playing file 2011-04-13 21:26:47.878531 [DEBUG] switch_ivr_play_say.c:244 Handle say:[1] (en:en) 2011-04-13 21:26:47.878531 [DEBUG] switch_ivr_play_say.c:1291 Codec Activated L16@8000hz 1 channels 30ms Any ideas why this would be? I checked Jira but couldn't find any reference to bugs there. Thanks!

1 1

Cannot compile freetdm
by Valery Kalinin 14 Apr '11

14 Apr '11

# cd /usr/local/freeswitch/libs/freetdm # ./configure --with-libisdn # make bla-bla-bla cc1: warnings being treated as errors src/ftmod/ftmod_isdn/ftmod_isdn.c: In function 'ftdm_isdn_931_34': src/ftmod/ftmod_isdn/ftmod_isdn.c:982: warning: unused variable 'cplen' src/ftmod/ftmod_isdn/ftmod_isdn.c: In function 'isdn_configure_span': src/ftmod/ftmod_isdn/ftmod_isdn.c:2794: warning: passing argument 2 of 'Q931SetLogCB' from incompatible pointer type make: *** [ftmod_isdn_la-ftmod_isdn.lo] Error 1 Why? libisdn-0.0.1 installed

1 0

fax and jpg to tiff
by Madovsky 14 Apr '11

14 Apr '11

sorry I don't have the personal email of Steve Underwood (I saw a thread of him related of this subject), it's about a problem of spandsp txfax and jpeg files. I didn't succeed to find the right conversion to make the far end accept the fax. I get always "far end cannot receive at the size of the image". this problems occurs only from jpeg to tiff conversion. I use imagemagick for that : sudo /usr/bin/convert -page Letter -density 204x196 -resize 1728x1184 -units pixelsperinch -monochrome -compress Fax <fileToConvert> <fileToSave> I tried numrous options but no luck. Thanks

1 0