- FreeSWITCH-users - FreeSWITCH Mailing Lists

last git voicemail problem
by Madovsky 17 Apr '11

17 Apr '11

the voicemail doesn't repeat that the message is too short when no voice is coming. instead there's undefinetly a silence until it reaches the max lenght Thanks Franck

2 1

can not call between two profile
by gmail 16 Apr '11

16 Apr '11

hi! 1000 register to profile internal.xml, 1010 register to profile external.xml 1000 and 1010 register successfully. 1000 can not call 1010, [ERR] switch_ivr_originate.c:2638 Cannot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED] 1010 call 1000 ok. that is why? thanks

2 1

txfax problems last git
by Madovsky 15 Apr '11

15 Apr '11

before update it was working well here is the log 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 T4 expired in phase T30_PHASE_B_RX, state 6 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Retry number 2 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_B_RX to T30_PHASE_B_TX 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 4 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 DCS: 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= Store and forward Internet fax (T.37): Not set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Real-time Internet fax (T.38): Not set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= 3G mobile network: Not set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..1.= Receive fax: Set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..10 00..= Selected data signalling rate: V.17 14400bps 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= 2-D coding: Set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..00= Recording width: 215mm +- 1% 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 10..= Recording length: Unlimited 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .111 ....= Minimum scan line time: 0ms 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 0... ....= Extension indicator: Not set 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 6 to 4 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Sending ident 'boophone.com' 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: TSI without final frame tag 2011-04-15 16:54:07.685484 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: ff 03 43 6d 6f 63 2e 65 6e 6f 68 70 6f 6f 62 20 20 20 20 20 20 20 20 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_B_TX, state 4 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 DCS: 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= Store and forward Internet fax (T.37): Not set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Real-time Internet fax (T.38): Not set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= 3G mobile network: Not set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..1.= Receive fax: Set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..10 00..= Selected data signalling rate: V.17 14400bps 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= 2-D coding: Set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..00= Recording width: 215mm +- 1% 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 10..= Recording length: Unlimited 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .111 ....= Minimum scan line time: 0ms 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 0... ....= Extension indicator: Not set 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: DCS with final frame tag 2011-04-15 16:54:09.265684 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: ff 13 83 00 e2 78 2011-04-15 16:54:09.546048 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_B_TX, state 4 2011-04-15 16:54:09.626076 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_B_TX, state 4 2011-04-15 16:54:09.626076 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 4 to 5 2011-04-15 16:54:09.626076 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_B_TX to T30_PHASE_C_NON_ECM_TX 2011-04-15 16:54:09.626076 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-15 16:54:09.626076 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-15 16:54:09.626076 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 7 2011-04-15 16:54:12.645314 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_C_NON_ECM_TX, state 5 2011-04-15 16:54:12.645314 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_C_NON_ECM_TX to T30_PHASE_B_RX 2011-04-15 16:54:12.645314 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 4 2011-04-15 16:54:12.645314 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 0 2011-04-15 16:54:12.645314 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Start T4 2011-04-15 16:54:12.645314 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 5 to 6 2011-04-15 16:54:13.166347 [DEBUG] mod_nibblebill.c:572 Received request via SESSION_HEARTBEAT! 2011-04-15 16:54:13.166347 [DEBUG] mod_nibblebill.c:433 Attempting to bill at $0.17304 per minute to account 9999999999999 2011-04-15 16:54:13.166347 [DEBUG] mod_nibblebill.c:491 30 seconds passed since last bill time of 2011-04-15 16:53:43 2011-04-15 16:54:13.166347 [DEBUG] mod_nibblebill.c:498 Billing $0.086548 to 9999999999999 (Call: 1132765120(a)67.205.80.135 / 0.000009 so far) 2011-04-15 16:54:13.166347 [DEBUG] mod_nibblebill.c:321 Doing update query [UPDATE accounts SET cash=cash-0.086548 WHERE id='9999999999999'] 2011-04-15 16:54:13.288037 [DEBUG] mod_nibblebill.c:366 Doing lookup query [SELECT cash AS nibble_balance FROM accounts WHERE id='9999999999999'] 2011-04-15 16:54:13.293107 [DEBUG] mod_nibblebill.c:376 Retrieved current balance for account 9999999999999 (balance = 6.655555) 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 T4 expired in phase T30_PHASE_B_RX, state 6 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Too many retries. Giving up. 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 4 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 6 to 3 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: DCN with final frame tag 2011-04-15 16:54:16.105756 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: ff 13 fb 2011-04-15 16:54:17.165849 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2011-04-15 16:54:17.245860 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2011-04-15 16:54:17.245860 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Disconnecting 2011-04-15 16:54:17.245860 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_D_TX to T30_PHASE_E 2011-04-15 16:54:17.245860 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-15 16:54:17.245860 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 1 2011-04-15 16:54:17.245860 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 3 to 2 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_E, state 2 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:333 ============================================================================== 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:345 Fax processing not successful - result (20) Received no response to DCS or TCF. 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:350 Remote station id: 33456809528 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:351 Local station id: boophone.com 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:352 Pages transferred: 0 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:354 Total fax pages: 1 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:355 Image resolution: 8031x7700 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:356 Transfer Rate: 14400 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:358 ECM status off 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:359 remote country: 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:360 remote vendor: 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:361 remote model: 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:363 ============================================================================== 2011-04-15 16:54:18.245661 [DEBUG] switch_core_session.c:954 Send signal sofia/external/0033456809528 [BREAK] 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 2 to 32 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_E to T30_PHASE_CALL_FINISHED 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 9 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX FAX exchange complete 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 9 2011-04-15 16:54:18.245661 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX FAX exchange complete 2011-04-15 16:54:18.265918 [DEBUG] switch_core_codec.c:141 sofia/external/0033456809528 Restore previous codec PCMU:0. my dialplan <extension name="sendfax"> <condition field="destination_number" expression="^sendfax$"> <action application="set" data="fax_enable_t38_request=false"/> <action application="set" data="fax_enable_t38=true"/> <action application="txfax" data="${fax_path}"/> <action application="hangup"/> </condition> </extension> Thanks ! Franck

2 2

mod_xml_curl, sofia_reg.c:1872 Can't find user ...
by Philipp Kempgen 15 Apr '11

15 Apr '11

Hi, I'm playing with mod_xml_curl per http://wiki.freeswitch.org/wiki/Mod_xml_curl#bindings.3D.22directory.22 but having some problems. Softphone (username "11") sends a REGISTER to FreeSwitch (1.0.6) at 192.168.65.133. xml_curl.conf.xml: --------------------------------------------------------------- <binding name="users directory"> <param name="gateway-url" value="http://127.0.0.1:3000/freeswitch-directory-entries/search.xml" bindings="directory" /> </binding> --------------------------------------------------------------- FS sends a lookup request to the web service. Parameters: --------------------------------------------------------------- section=directory ... key=id user=11 domain=192.168.65.133 --------------------------------------------------------------- Fine. The response is: --------------------------------------------------------------- <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <document type="freeswitch/xml"> <section name="directory"> <domain name="192.168.65.133"> <users> <user id="11" number-alias="1111"> <params> <param name="dial-string" value="${sofia_contact(11(a)192.168.65.133)}" /> <param name="password" value="123" /> <param name="vm-password" value="417906717460606223" /> </params> <variables> <variable name="accountcode" value="11" /> <variable name="effective_caller_id_number" value="foo" /> <variable name="effective_caller_id_name" value="Foo, Foo" /> <variable name="outbound_caller_id_number" value="foo" /> <variable name="outbound_caller_id_name" value="Foo, Foo" /> <variable name="user_context" value="default" /> <variable name="toll_allow" value="domestic,international,local" /> <variable name="callgroup" value="users" /> </variables> </user> </users> </domain> </section> </document> --------------------------------------------------------------- But I get a complaint on the console: [WARNING] sofia_reg.c:1872 Can't find user [11(a)192.168.65.133] You must define a domain called '192.168.65.133' in your directory and add a user with the id="11" attribute and you must configure your device to use the proper domain in it's authentication credentials. What can it be? A domain with name="192.168.65.133" and a user with id="11" is in the response, so why doesn't sofia find it? Philipp

2 2

Noise heard when a user holds a conference in SRTP mode
by Ujjwal SIngh 15 Apr '11

15 Apr '11

Hi, I have FreeSwitch configured as a conference bridge, the sip_secure_media=true in dialplan and vars.xml. User A, B and C are in a conference, the media is established in SRTP mode, when any user presses hold, other members hear noise, while in RTP mode normal Music on Hold is heard. Can anybody please help what is going wrong in SRTP case. I have uploaded FreeSwitch log in pastebin below http://pastebin.freeswitch.org/16103 Thanks for the help. Regards, Ujjwal

1 0

rtp-timeout-sec
by Madovsky 15 Apr '11

15 Apr '11

Is it possible to set rtp_timeout_sec in dialplan and if yes to have a different rtp_timeout_sec value for the originator leg and the callee leg ? thanks Franck

2 2

Non-transcoding G729 calls using Sangoma D100
by David Notivol 15 Apr '11

15 Apr '11

Hi all, I'm using a Sangoma D100 card for transcoding with FreeSwitch. It seems the normal behavior is a call not transcoding (g729-g729) is using a session in the sangoma card, although it reports the call is not encoding nor decoding. Since we can't load mod_g729 and mod_sangoma_g729 at the same time; do you know if is there any way to avoid g729-g729 calls using Sangoma sessions? Thanks in advance. Regards, David Notivol

3 4

bind_meta_app blocks DTMFs?
by Mariusz Czulada 15 Apr '11

15 Apr '11

Hi All, I'm trying to implement subconference feature, to allow some participants go (or rather "gosub") to a another conference room to discuss something then get back to the main conference. I use FreeSWITCH Version 1.0.head (hacked-20110112T172836Z). Bellow some configure extracts: >From conference.conf.xml: ... <caller-controls> ... <group name="just_exit"> <control action="hangup" digits="#"/> <control action="hangup" digits="1"/> <control action="mute" digits="0"/> </group> ... </caller-controls> ... <profiles> .. <profile name="confX_M"> ... <param name="caller-controls" value="just_exit"/> ... </profile> <profile name="confX_S"> ... <param name="caller-controls" value="just_exit"/> ... </profile> </profiles> ... >From dialplan (own) public/confX.conf.xml: ... <extension name="confX_join"> <condition field="destination_number" expression="^confX_join$"/> <condition field="${confX_num}" expression="^1(\d{4})$"> <action application="bind_meta_app" data="1 a s execute_extension::subX_1"/> <action application="bind_meta_app" data="2 a s execute_extension::subX_2"/> <action application="bind_meta_app" data="3 a s execute_extension::subX_3"/> <action application="conference" data="confX_${cpnfX_num}@confX_M"/> </condition> </extension> ... <extension name="subX_1"> <condition field="destination_number" expression="^subX_1$"> <action application="set" data="pass_rfc2833=true"/> <action application="conference" data="confX_${cpnfX_num}_1@confX_S"/> </condition> </extension> <extension name="subX_2"> <condition field="destination_number" expression="^subX_2$"> <action application="set" data="pass_rfc2833=true"/> <action application="conference" data="confX_${cpnfX_num}_2@confX_S"/> </condition> </extension> <extension name="subX_3"> <condition field="destination_number" expression="^subX_3$"> <action application="set" data="pass_rfc2833=true"/> <action application="conference" data="confX_${cpnfX_num}_3@confX_S"/> </condition> </extension> ... During connection user is first handled by IVR, where he enters conference number (assume: "1234") which is stored in "confX_num" variable. Then call is transfered to "confX_join". Here I assign actions for *1, *2 and *3 DTMF sequences then join main conference ("confX_1234_M"). When some user presses i.e. "*2" then he also enters subconf 2 ("confX_1234_2"). Those users attached to "confX_1234_2" are at the same time still attached also to "confX_1234_M", but found muted and deaf to other participants. Then, leaving subconference they will be back "alive" in master conference, which I tested by kicking them from "confX_1234_2" manually. Now my problem begins. Then user is on "confX_1234_M" dialing "#" forces user to leave conference, as defined in "just-exit" controls. But when user enters also "confX_1234_2" DTMF codes are no longer processed, neither by master conference nor by subconference. I set "pass_rfc2833=true" but it is not helpful. Did I missed to set something [1] in the dialplan or other config files, or [2] actually no DTMF codes can be processed while in "*2" leg? And if [2]==true: would it be possible to develop such DTMF handling? BTW: DTMFs are not processed while in subconference but if user is kicked off from subconf back to main conference, one can use DTMF codes again to (un)mute (0), join sub (*2) or leave (# or 1). TIA for your help or tips. Regards, Mariusz

4 5

Detect T.38 reinvite and transcode?
by Bill W. 15 Apr '11

15 Apr '11

Hi there, Is there a way to have FreeSWITCH detect a T.38 reinvite, accept it, and transcode that into ULAW before sending it on to the B-leg? The fax is neither originated nor terminated on the FS gateway. FS would simply transcode T.38 to ULAW. I looked at the mod_spandsp documentation and it wasn't readily apparent. To be clear host_a -> FS -> host_b host_a sends an INVITE host_b responds with 100, 180, 200 then host_a sends another INVITE with SDP for T.38 Can FS ack that RE-INVITE and transcode, so the legs look like this? host_a -> T.38 -> FS -> ULAW -> host_b Thanks! Bill

3 3

The Usage of uuid_preprocess && echo cancellation
by vivid333 15 Apr '11

15 Apr '11

Hi: 1. can any one know the usage of uuid_preprocess? 2. according to the FreeSwitch code, this command would add a bug to the uuid session, initialize echo parameters, and in functions switch_core_session_read_frame/switch_core_session_write_frame do echo handle. but the echo still exist. do any one help me ? thanks.. Echo Scenes: Telephone 1000, 1001 registered the FreeSwitch, 1000 call 1001, 1001 answered( two of them are handfree, producing scary sound); Try Solution: Launch the command-line ulility: #> fs_cli #>: show channels uuid1, uuid2 #>:uuid_preprocess uuid1 recho_cancel=true; #>:uuid_preprocess uuid2 recho_cancel=true; but the echo still exist. can any one help me, thanks!

2 1