- FreeSWITCH-users - FreeSWITCH Mailing Lists

Integration of SIP-T or MGCP in FreeSwitch
by omdivo 15 Apr '11

15 Apr '11

Hello, Is somebody tried to connect two Cisco's MGC using Freeswitch using MGCP or SIP-T/SIP-I? Regards.

2 1

Re: [Freeswitch-users] Relay Proxy-Authentication requests to the caller
by Dave Horton 15 Apr '11

15 Apr '11

I had the same question/issue myself, and would be interested to know if there is a way. For myself, I had to do two things to get this to work: 1. Disable authentication so that FS would not itself generate a challenge. In vars.xml I added this: <X-PRE-PROCESS cmd="set" data="internal_auth_calls=false"/> and in my internal.xml (because calls were coming in on my internal profile): <param name="accept-blind-auth" value="true"/> 2. Then I had to hack mod_sofia to create a new channel variable containing the received Proxy-Authorization on the inbound leg, and also let me set it on the outbound leg. After that it worked, but I would still prefer a solution that didn't require changing mod_sofia, if one exists... >>Hi All! >> >>I would like to know if there is a param we could set in sofia profile to let freeswitch relay Proxy-Authentication requests to the caller instead of absorbing it. >> >>Regards, >>Hamid

4 8

proxy SDP
by Sam 15 Apr '11

15 Apr '11

Hi all, Is there method to just proxy SDP through Freeswitch through sip profile ? Regards Sam

7 18

outbound_caller_id_number
by budi wibowo 15 Apr '11

15 Apr '11

hi i setup outbound_caller_id_number in my FS, config looks like this <variable name="outbound_caller_id_name" value="$${outbound_caller_name}"/> <variable name="outbound_caller_id_number" value="811856609"/> <variable name="callgroup" value="techsupport"/> FS connect via sip to mera switch. mera switch to partner connect via H323. on H323 i see calling number is just blank. any idea how set outgoing number for FS? br budi

2 1

Re: [Freeswitch-users] fax and jpg to tiff
by Madovsky 15 Apr '11

15 Apr '11

is there the spandsp log 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= Store and forward Internet fax (T.37): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Real-time Internet fax (T.38): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= 3G mobile network: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= V.8 capabilities: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Preferred octets: 256 octets 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= Ready to transmit a fax document (polling): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..1.= Can receive fax: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..10 11..= Supported data signalling rates: V.27 ter, V.29, and V.17 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= 2-D coding: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..00= Recording width: 215mm +- 1% 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 10..= Recording length: Unlimited 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .111 ....= Receiver's minimum scan line time: 0ms at 3.85 l/mm; T7.7 = T3.85 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= Compressed/uncompressed mode: Compressed 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Error correction mode (ECM): Non-ECM 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= T.6 coding: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= "Field not valid" supported: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= Multiple selective polling: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Polled sub-address: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= T.43 coding: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ...0 ....= Plane interleave: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= Voice coding with 32kbit/s ADPCM (Rec. G.726): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Reserved for the use of extended voice coding set: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...1= R8x15.4lines/mm: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= 300x300pels/25.4mm: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= R16x15.4lines/mm and/or 400x400pels/25.4mm: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= Inch-based resolution preferred: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ...1 ....= Metric-based resolution preferred: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= Minimum scan line time for higher resolutions: T15.4 = T7.7 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Selective polling: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...1= Sub-addressing: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= Password: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Ready to transmit a data file (polling): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ...0 ....= Binary file transfer (BFT): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= Document transfer mode (DTM): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Electronic data interchange (EDI): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 0... ....= Extension indicator: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Selected compression T.4 2-D (2) 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Trying to send file '/1302753792.tiff' 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Start sending document 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Minimum bits per row will be 0 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Starting page 1 of transfer 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Image width (200 pixels) not an acceptable FAX image width 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 The far end is incompatible 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 18 to 3 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: DCN with final frame tag 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: ff 13 fb 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 HDLC signal status is Carrier down (-1) in state 3 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 4 2011-04-14 00:03:31.624981 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Disconnecting 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_D_TX to T30_PHASE_E 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 1 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 3 to 2 2011-04-14 00:03:32.704744 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_E, state 2 ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Wednesday, April 13, 2011 11:33 PM Subject: fax and jpg to tiff sorry I don't have the personal email of Steve Underwood (I saw a thread of him related of this subject), it's about a problem of spandsp txfax and jpeg files. I didn't succeed to find the right conversion to make the far end accept the fax. I get always "far end cannot receive at the size of the image". this problems occurs only from jpeg to tiff conversion. I use imagemagick for that : sudo /usr/bin/convert -page Letter -density 204x196 -resize 1728x1184 -units pixelsperinch -monochrome -compress Fax <fileToConvert> <fileToSave> I tried numrous options but no luck. Thanks

3 8

acl by ANI
by Boris Kovalenko 15 Apr '11

15 Apr '11

Hello! Is this possible to check incoming calls from gateways for specific ANIs without writing script or specific extension? By acl for example? -- С уважением, Борис Коваленко ЗАО "Тагнет" (3435) 494991

2 1

FreeSwitch Debug Full Log(version 1.0.6)
by vivid 15 Apr '11

15 Apr '11

how can I use FreeSwitch to trace *the Function call Procedure* in *fs_cli*. (using Command? configuration?) [DEBUG] *switch_ivr_bridge.c*:911 switch_ivr_multi_threaded_bridge() sofia/external/1XXX4951027 receive message [BRIDGE]

4 4

Gateway with dynamic IP address
by Juan Wajnerman 14 Apr '11

14 Apr '11

I asked this question yesterday in the IRC but I couldn't get a solution. I'd like to have a gateway configured in FreeSwitch without specifying the static IP address. I have this configuration: <user id="gw"> <gateways> <gateway name="gw"> <param name="username" value="gw"/> <param name="password" value="password"/> <param name="register" value="false"/> <param name="extension" value="2"/> </gateway> </gateways> <params> <param name="password" value="password"/> </params> <variables> <variable name="user_context" value="default" /> </variables> </user> and the SIP device is registering properly, but I cannot dial with addresses like: "sofia/gateway/gw/123456789". Note that this works if the gateway name is the IP address or host name, or if I add a "proxy" setting with the IP address. I have a similar configuration in asterisk, where the sip.conf contains: [gw] type=friend secret=password context=default host=dynamic And once the gateway is registered in asterisk, I can dial with "SIP/gw/123456789". Is there any way to make a similar configuration in FreeSwitch? Thanks! - Juan

8 12

mod_event_socket Whether can get freeswitch error messages
by 张明 14 Apr '11

14 Apr '11

freeswitch-users！ 1. mod_event_socket Whether can get freeswitch error messages 2. how to get 　　　　　　　　致礼！　　　　　　　　sc_zhangming(a)sina.com 　　　　　　　　　　2011-04-14

4 3

fax tone detection failed
by romon.zaman 14 Apr '11

14 Apr '11

hi, i am trying to detect fax tone on outgoing calls. here is my javascript code +++++++++++++++++++++++ session1 = new Session("{ignore_early_media=false}sofia/gateway/flowroute/"+argv[0]+""); session1.execute("tone_detect", "fax 1100 r +30000 set 'fax_tone_detected=true' 1"); msleep(argv[1]); session1.hangup(); ++++++++++++++++++++++++ i checked pcap file and using wireshark , i can hear sone tone on rtp audio playback. but freeswitch cant detect that.. is there any other solution to find out specific tone like fax?? thanks in advance ----- Original Message ----- From: <freeswitch-users-request(a)lists.freeswitch.org> To: <freeswitch-users(a)lists.freeswitch.org> Sent: Wednesday, April 13, 2011 12:00 PM Subject: FreeSWITCH-users Digest, Vol 58, Issue 81 > Send FreeSWITCH-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > > You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FreeSWITCH-users digest..." > > > > __________ Information from ESET Smart Security, version of virus > signature database 6014 (20110404) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > -------------------------------------------------------------------------------- > Today's Topics: > > 1. Incompatible destination (FERNANDO VILLARROEL) > 2. FreeSWITCH: No Longer The Best Kept Secret In OSS VoIP > Software (Michael Collins) > 3. Re: occasional ~5s delay during bind_meta_app > execute_extenstion (Michael Collins) > 4. Re: Incompatible destination (Michael Collins) > 5. Re: Freeswitch Server Down (ovvenkat) > 6. Re: Freeswitch Server Down (guru singh) > > > > __________ Information from ESET Smart Security, version of virus > signature database 6014 (20110404) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > -------------------------------------------------------------------------------- > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > __________ Information from ESET Smart Security, version of virus > signature database 6014 (20110404) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > __________ Information from ESET Smart Security, version of virus signature database 6014 (20110404) __________ The message was checked by ESET Smart Security. http://www.eset.com

5 7