- FreeSWITCH-users - FreeSWITCH Mailing Lists

Customer SIP headers
by Chad Vogel 03 Oct '11

03 Oct '11

hello, I'm looking to do custom sip headers. I wan't to send a 302 message and set the content header to something like this: Contact: <tel:+17208886435> ;expires=3600 Also on the From header I would like to add a isup-oli param to set ISUP cause codes. how can i do this? Chad

3 2

FreeSwitch fails with Kamailio Dispatcher in front.
by Henrik Aagaard Sørensen 02 Oct '11

02 Oct '11

I've setup a Freeswitch which works when connecting devices directly to it. But with a Kamailio Dispatcher setup in front, it fails. It reports the error: 2011-09-30 08:47:04.309900 [ERR] sofia_reg.c:2136 Cannot locate any authentication credentials to complete an authentication request for realm '"10.0.1.7"' I've setup tshark on FreeSwitch now to analyze the input from both scenarios. When connected directly to FreeSwitch, which works, this is my INVITE: http://pastebin.com/p4CZJJz3 This is how the INVITE looks when it fails via Kamailio: http://pastebin.com/9AFEsuVs Can anyone help my out?

1 0

mod_callcenter, moh, and session progress (early media)
by Игорь Кувалдин 02 Oct '11

02 Oct '11

Hello everyone. How can I play moh in mod_callcenter in session progress? Is there a bridge for the variables for such a possibility? Or an analogue <action application="pre_answer"/>?

1 0

FreeSWITCH never hangup at nobal_amount
by mg123 02 Oct '11

02 Oct '11

freeswitch is not supporting billing during the call and never hangup at nobal_amount. nibblebil_conf.xml configurations During the call fs_cli display below lines for each heartbeat 2011-09-15 17:30:42.507425 [DEBUG] mod_nibblebill.c:573 Received request via SESSION_HEARTBEAT! 2011-09-15 17:30:42.507425 [DEBUG] mod_nibblebill.c:434 Attempting to bill at $1.00 per minute to account 1005 2011-09-15 17:31:42.544169 [DEBUG] mod_nibblebill.c:573 Received request via SESSION_HEARTBEAT! 2011-09-15 17:31:42.544169 [DEBUG] mod_nibblebill.c:434 Attempting to bill at $1.00 per minute to account 1005 Please advice. Thanks. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/FreeSWITCH-never-hangup-at-no… Sent from the freeswitch-users mailing list archive at Nabble.com.

2 1

Voicemail notifications not working
by vitaleg 01 Oct '11

01 Oct '11

Hello. Please help - I want to send notifications of new vm to my email. In directory for the particular user set: vm-notify-mailto, vm-notify-email-all-messages params and in switch.conf.xml: But stil no notifications are sending. When missed vm-notify-mailto, there was a notification that something wrong and notifications won`t work/ Then I fixed it, warning disappeared. But still no notifications, no errors and so on ( Please help. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Voicemail-notifications-not-w… Sent from the freeswitch-users mailing list archive at Nabble.com.

1 1

FreeSWITCH Conference Call Oct 5: All about git
by Michael Collins 01 Oct '11

01 Oct '11

Hello FreeSWITCHers! Travis Cross will be presenting on the subject of git. Many of us have a love-hate (or a hate-hate) relationship with git so Travis is going to help us get over the hump. The agenda page has a place where you can post questions: http://wiki.freeswitch.org/wiki/FS_weekly_2011_10_05#Featured_Presentation Looking forward to next Wednesday! -MC

3 4

How to distinguish between Authenticated sip and not authenticated users
by Anton VG 30 Sep '11

30 Sep '11

Guys, trying to distinguish between authenticated SIP user and not authenticated, still no luck I would like to allow anyone to call my FS users via SIP, so there are registered users and everyone else so I have allowed <param name="auth-calls" value="true"/> <param name="apply-inbound-acl" value="allow_all"/> acl.xml: <list name="allow_all" default="allow"> <node type="allow" cidr="0.0.0.0/0"/> </list> Any call passes through, by always have [CHANNEL_CREATE] event variable_sip_authorized: true in event headers. But I would like to know if user is authorized or not. if I disable authentication by setting this to false <param name="auth-calls" value="false"/> all calls do not have any auth headers. Any clue?

3 4

mod_callcenter doesn't send calls from a queue to an agent
by Yungwei Chen 30 Sep '11

30 Sep '11

Hi, I am experimenting with mod_callcenter. And I notice that mod_callcenter doesn't send calls from a queue to an agent. In my test, agent 1005 is registered with FS using phoner-lite. When freeswitch is restarted, "callcenter_config queue list" returns the following: name|strategy|moh_sound|time_base_score|tier_rules_apply|tier_rule_wait_second|tier_rule_wait_multiply_level|tier_rule_no_agent_no_wait|discard_abandoned_after|abandoned_resume_allowed|max_wait_time|max_wait_time_with_no_agent|max_wait_time_with_no_agent_time_reached|record_template support|longest-idle-agent|local_stream://moh|system|false|300|true|false|60|false|0|0|5| +OK and "callcenter_config agent get status 1005" returns the following: Available 2011-09-30 09:09:14.143579 [DEBUG] mod_callcenter.c:886 Get Info Agent 1005 status = Available Now when I dial cc_queue from another sip client, I can hear MOH fine, but this call is not passed to agent 1005. The following shows up in the log. 2011-09-30 09:09:23.442165 [DEBUG] mod_callcenter.c:1043 Updated Agent 1005 set state = Receiving 2011-09-30 09:09:23.442165 [DEBUG] mod_callcenter.c:1043 Updated Agent 1005 set status = Logged Out 2011-09-30 09:09:23.442165 [DEBUG] mod_callcenter.c:1043 Updated Agent 1005 set uuid = 2011-09-30 09:09:23.442165 [DEBUG] mod_callcenter.c:1654 Agent 1005 Origination Canceled : NONE 2011-09-30 09:09:23.442165 [DEBUG] mod_callcenter.c:1043 Updated Agent 1005 set state = Waiting and "callcenter_config agent get status 1005" now returns the following: Logged Out 2011-09-30 09:12:11.092643 [DEBUG] mod_callcenter.c:886 Get Info Agent 1005 status = Logged Out What am I missing here? Thanks. Here's the content of callcenter.conf.xml, in which I define a queue, an agent, and assign the agent to the queue. <configuration name="callcenter.conf" description="CallCenter"> <settings></settings> <queues> <queue name="support"> <param name="strategy" value="longest-idle-agent"/> <param name="moh-sound" value="$${hold_music}"/> <param name="time-base-score" value="system"/> <param name="max-wait-time" value="0"/> <param name="max-wait-time-with-no-agent" value="0"/> <param name="max-wait-time-with-no-agent-time-reached" value="5"/> <param name="tier-rules-apply" value="false"/> <param name="tier-rule-wait-second" value="300"/> <param name="tier-rule-wait-multiply-level" value="true"/> <param name="tier-rule-no-agent-no-wait" value="false"/> <param name="discard-abandoned-after" value="60"/> <param name="abandoned-resume-allowed" value="false"/> </queue> </queues> <agents> <agent name="1005" type="uuid-standby" contact="[call_timeout=10]user/1005(a)192.168.216.18" status="Available" max-no-answer="3" wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" /> </agents> <tiers> <tier agent="1005" queue="support" level="1" position="1"/> </tiers> </configuration> Here's how I send a call to the queue. This works fine. <extension name="sending-calls-to-queue"> <condition field="destination_number" expression="^cc_queue$"> <action application="answer" /> <action application="callcenter" data="support"/> </condition> </extension>

1 0

FreeSwitch fails with Kamailio dispatcher as front.
by Henrik Aagaard Sørensen 30 Sep '11

30 Sep '11

I have a setup with 2 FreeSwitch servers and a single Kamailio sevrer in front with the dispatcher module. Everything works when directly connected to FreeSwitch. When I connect to Kamailio I'm only able to call one way between 2 extensions. The log from FreeSwitch says: 2011-09-29 15:51:53.625761 [ERR] sofia_reg.c:2136 Cannot locate any authentication credentials to complete an authentication request for realm '"10.0.1.7"' I guess it because, somehow, that one of the extension has a local IP. Both extensions can register and call into FreeSwitch and hear hold music etc. It's just one of the extension who can't call the other extension. I don't know if the error should be fixed on FreeSwitch or on Kamailio. And how... Can anyone help me out?

2 2

FsGUI.exe on windows 2003 server: no available plugin
by king2kin 30 Sep '11

30 Sep '11

Hi, I downloaded windows version of FsGui.exe on http://wiki.freeswitch.org/wiki/Fsgui . After installing it, I tried to run it on windows 2003 server, it poped up an error dialog saying "no available plugins. Install conpatible plugins before running fsgui". Here I wonder what else I should install to run fsgui. Thanks. x.k.

2 7