- FreeSWITCH-users - FreeSWITCH Mailing Lists

sofia auth challenge loglevel warning to debug10 & fail2ban
by Leon de Rooij 06 Oct '11

06 Oct '11

Hi all, I noticed that the loglevel for sofia auth challenge was changed from warning to debug10 about two weeks ago - which I really like btw, it shouldn't be a warning http://fisheye.freeswitch.org/browse/freeswitch.git/src/mod/endpoints/mod_s… But doesn't this change break fail2ban for the ppl who use that ? The regex should at least be changed on the wiki: http://wiki.freeswitch.org/wiki/Fail2ban#Edit_Config_Files But I think most people don't log debug level to files, so fail2ban won't be triggered even if the regex is changed, right ? Don't know if it's a problem, maybe I'm overlooking something, just wanted to let everyone know.. regards, Leon

2 1

3pcc
by mazilo 06 Oct '11

06 Oct '11

On Line #66 of the /conf/sip_profiles/external.xml/ file, the 3pcc global option is commented out by default. I don't know if this 3pcc is a /fortunate/ or /unfortunate/ option to have, but it will make http://whistlephone.com WhistlePhone to work properly. Without the 3pcc option, there will be no incoming calls from http://whistlephone.com WhistlePhone (FS CLI will dump some messages as shown below) unless FS registers to all http://whistlephone.com WhistlePhone proxy servers as shown in http://wiki.freeswitch.org/wiki/Provider_Configuration:_WhistlePhone here . The question I have is if it is safe to enable the 3pcc option. If it is, then I don't mind to go ahead to update the wiki page. ----- FreeSWITCH hosted on a Seagate DockStar with OpenWRT and ONLY consumes 3 Watts of electricity. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/3pcc-tp6865965p6865965.html Sent from the freeswitch-users mailing list archive at Nabble.com.

1 0

FreeSWITCH Conference Call Today: Git Tutorial
by Michael Collins 05 Oct '11

05 Oct '11

Hello all! Today we have our very own Travis Cross who will be helping everyone get up to speed with git. We highly recommend everyone who uses the FreeSWITCH source to join us and get your git questions answered. The agenda page is here: http://wiki.freeswitch.org/wiki/FS_weekly_2011_10_05 Talk to you soon, Michael

3 4

mod_cdr_pg_csv not loading automatically
by Cliff Wells 05 Oct '11

05 Oct '11

I have this in modules.conf.xml:  <load module="mod_cdr_pg_csv"/>    <load module="mod_event_socket"/>     but mod_cdr_pg doesn't autoload. However, if I use fs_cli and "load mod_cdr_pg_csv", it loads and works fine. This is a fresh install from git yesterday. Unfortunately I can't restart FS until tonight (it's a production system) to see the startup messages, but I wonder if anyone has seen this type of behavior (my older system didn't have this issue). Scientific Linux 6.1 x86_64. Regards, Cliff

1 2

mod_avmd - Does this work for anyone on current builds?
by Jason Moran 05 Oct '11

05 Oct '11

I tried out mod_avmd 6+ months back and had some success. However, I cannot seem to get it to trip any longer on newer builds of FS. The avmd_detect variable is blank and no event fires on multiple carriers and destination phones. Does anybody else have success on current/recent builds of FS? Thanks, Jason Example code: function onInput(s, type, obj, arg) { try { if(type == "event" && session.getVariable("avmd_detect") == "TRUE") { console_log("info", "Voicemail Detected\n"); session.execute("avmd", "stop"); session.execute("sleep", "200"); session.streamFile('/usr/local/freeswitch/recordings/playbackfile.wav'); if(session.ready()) //Only hangup if onDTMF code has finished. { session.execute("hangup","ORIGINATOR_CANCEL"); //session.hangup doesn't give the code we want } return false; // don't allow original playback file to continue } } catch (e) { console_log("err", e + "\n"); } return true; } session = new Session('{ origination_caller_id_number=[deleted]}sofia/gateway/[deleted]/'+argv[0] ); if (session.ready()) { session.execute("sleep","500"); session.execute("avmd", "start"); console_log("info", "avmd started\n"); session.streamFile('/usr/local/freeswitch/recordings/playbackfile.wav', onInput); console_log("info","avmd_detect value is:"+session.getVariable("avmd_detect")+"\n"); if ( session.ready( ) ) { session.hangup( ); } }

1 0

using sip-force-contact with a gateway
by Julien Chavanton 05 Oct '11

05 Oct '11

Hi, I am dealing with an Asterisk server behind NAT that is not set properly, with its external IP I am asking them to fix it on there side but I am curious to know if there is a way to deal with this implemented in FS Freeswitch --> Internet --> NAT --> Asterisk In the "200 OK" returned by Asterisk as the private IP in the "Contact" header FS is returning ACK to the private IP. INVITE ---> <--- 200 OK ---> ACK <--- 200 OK ---> ACK <--- 200 OK ---> ACK .... It seems <param name="apply-nat-acl" value="rfc1918"/><param name="aggressive-nat-detection" value="true"/> does It seems sip-force-contact could patch the problem caused by the remote gateway Is there a way to us sip-force-contact with gateway instead of an entry in the directory ?

1 0

Freeswitch fail to load the mod_spidermonkey on startup, undefined symbol: SSLv2_client_method
by RrodolfoS . 05 Oct '11

05 Oct '11

List!, Freeswitch fail to load the mod_spidermonkey on startup, throw the follow [CRIT] 2011-10-05 08:46:43.966241 [CRIT] switch_loadable_module.c:1275 Error Loading module /usr/local/freeswitch/mod/mod_spidermonkey.so **/usr/local/freeswitch/mod/mod_spidermonkey.so: undefined symbol: SSLv2_client_method** I try recompile the module with: make mod_spidermonkey-install but continues fail to load spidermonkey module how can i solve it?, i'm using debian wheezy amd64 linux/3.0.0-1-686-pae. The freeswitch source was downloaded from git clone git://git.freeswitch.org/freeswitch.git thanks. Rodolfo Sauce-Guinand

1 0

Re: [Freeswitch-users] Installing GIT for CentOS the link is down or give me
by Masood Ahmed 05 Oct '11

05 Oct '11

Thank you Lloyd Aloysius. On Tue, Oct 4, 2011 at 10:02 PM, < freeswitch-users-request(a)lists.freeswitch.org> wrote: > Send FreeSWITCH-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > > You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FreeSWITCH-users digest..." > > Today's Topics: > > 1. Re: Installing GIT for CentOS the link is down or give me > directo link of latest version. (Lloyd Aloysius) > 2. Re: no switch_event_get_header in FreeSwitch.dll (Phillip Jones) > 3. Re: no switch_event_get_header in FreeSwitch.dll (Phillip Jones) > 4. persistant registration (Madovsky) > 5. Re: persistant registration (Madovsky) > 6. Adding new MOH stream - isn't reloadxml enough to make it > effective? (Victor Chukalovskiy) > 7. BLF on a Valet Park Orbit? (Randy Andrade) > > > ---------- Forwarded message ---------- > From: Lloyd Aloysius <lloyd.aloysius(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Date: Tue, 4 Oct 2011 12:51:34 -0400 > Subject: Re: [Freeswitch-users] Installing GIT for CentOS the link is down > or give me directo link of latest version. > > 1. GIT Latest Version > > wget > http://www.codemonkey.org.uk/projects/git-snapshots/git/git-latest.tar.gz > > > 2.FreeSWITCH Latest Version > > git clone git://git.freeswitch.org/freeswitch.git > > > Thanks > Lloyd > > * > * > > > > On Tue, Oct 4, 2011 at 9:03 AM, Masood Ahmed <masood24(a)gmail.com> wrote: > >> Dear All, >> >> I am new to FreeSwitch and I have installed the old version 1.0.6 on >> CentOS-5.5 32 Bit >> From wiki I read that to install the latest version of freeswitch should >> use GIT. >> Now to install GIT I found following link : >> http://kernel.org/pub/software/scm/git/git-1.7.6.tar.bz2 >> but the link is down since last two weeks, I am using* CentOS 5.5 32 Bit >> machine.* >> Can any one tell me where can i find the GIT OR most importantly if some >> one knows the direct link to download FreeSwitch Latest Version. >> Like for older version this is the direct link : >> http://files.freeswitch.org/freeswitch-1.0.6.tar.gz >> >> Will appreciate your Help. >> >> Thanks >> >> -- >> *Regards, >> Masood Ahmed >> * >> >> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > > ---------- Forwarded message ---------- > From: Phillip Jones <pjintheusa(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Date: Tue, 4 Oct 2011 13:12:18 -0400 > Subject: Re: [Freeswitch-users] no switch_event_get_header in > FreeSwitch.dll > VS2008 - OK - thanks for the pointer - let me take a look. > > On Tue, Oct 4, 2011 at 9:57 AM, Jeff Lenk <jeff(a)jefflenk.com> wrote: > >> VS2008 or VS2010? This is most likely caused by a SWIG problem. >> >> -- >> View this message in context: >> http://freeswitch-users.2379917.n2.nabble.com/no-switch-event-get-header-in… >> Sent from the freeswitch-users mailing list archive at Nabble.com. >> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > > > ---------- Forwarded message ---------- > From: Phillip Jones <pjintheusa(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Date: Tue, 4 Oct 2011 13:34:18 -0400 > Subject: Re: [Freeswitch-users] no switch_event_get_header in > FreeSwitch.dll > Sorry - my bad. I still had mod_file string in there. Deleted dll and all > is good. > > On Tue, Oct 4, 2011 at 1:12 PM, Phillip Jones <pjintheusa(a)gmail.com>wrote: > >> VS2008 - OK - thanks for the pointer - let me take a look. >> >> >> On Tue, Oct 4, 2011 at 9:57 AM, Jeff Lenk <jeff(a)jefflenk.com> wrote: >> >>> VS2008 or VS2010? This is most likely caused by a SWIG problem. >>> >>> -- >>> View this message in context: >>> http://freeswitch-users.2379917.n2.nabble.com/no-switch-event-get-header-in… >>> Sent from the freeswitch-users mailing list archive at Nabble.com. >>> >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >>> >> >> > > > ---------- Forwarded message ---------- > From: "Madovsky" <infos(a)madovsky.org> > To: <freeswitch-users(a)lists.freeswitch.org> > Date: Tue, 4 Oct 2011 13:37:14 -0400 > Subject: [Freeswitch-users] persistant registration > ** > Hi all, > > sometimes sip registration stays persistant, even > if the phone is not connected anymore. I can see this line in sofia status > profile > > Status: Registered(UDP)(unknown) EXP(2011-10-04 09:38:40) > EXPSECS(-14152) > as you can see the expsecs is far under 0. > any idea ? > > Thanks > > > ---------- Forwarded message ---------- > From: "Madovsky" <infos(a)madovsky.org> > To: <freeswitch-users(a)lists.freeswitch.org> > Date: Tue, 4 Oct 2011 13:41:39 -0400 > Subject: Re: [Freeswitch-users] persistant registration > ** > Ok I just deleted some sqlite files in db directory and everything is fine. > probably a corrupted db file. > > thanks > > ----- Original Message ----- > *From:* Madovsky <infos(a)madovsky.org> > *To:* freeswitch-users(a)lists.freeswitch.org > *Sent:* Tuesday, October 04, 2011 1:37 PM > *Subject:* persistant registration > > Hi all, > > sometimes sip registration stays persistant, even > if the phone is not connected anymore. I can see this line in sofia status > profile > > Status: Registered(UDP)(unknown) EXP(2011-10-04 09:38:40) > EXPSECS(-14152) > as you can see the expsecs is far under 0. > any idea ? > > Thanks > > > > ---------- Forwarded message ---------- > From: Victor Chukalovskiy <victor.chukalovskiy(a)utoronto.ca> > To: freeswitch-users(a)lists.freeswitch.org > Date: Tue, 04 Oct 2011 13:55:16 -0400 > Subject: [Freeswitch-users] Adding new MOH stream - isn't reloadxml enough > to make it effective? > ** > Hello, > > Just added a new stream in local_stream.conf.xml file. > Upon "*reloadxml" *the new stream still doesn't show-up in output of "* > show_local_stream" > *Does it take more than "*reloadxml"* to make new stream available? Don't > want to restart a production system, so please let me know the right > command. > > Also, what exactly is <param name="chime-max" value="500"/> ? > In-line comment says "*limit to how many seconds the file will play" *but > wiki says "*max number of "break-in" attempts". *These two seem to > contradict each other, which one is the correct interpretation? > > > Thank you, > Victor > > > ---------- Forwarded message ---------- > From: Randy Andrade <randy.andrade(a)gmail.com> > To: freeswitch-users(a)lists.freeswitch.org > Date: Tue, 4 Oct 2011 15:02:23 -0400 > Subject: [Freeswitch-users] BLF on a Valet Park Orbit? > Hey there, > > I'm just wondering if anyone knows of a way to use the fifo / parking > functionality in Freeswitch to trigger BLF updates on a phone. IE, on a > Cisco SPA508, I have BLF / SD keys setup with the default Freeswitch > 6001-6099 valet park spots (no I don't have keys for all 99 spots, I'm just > doing the first 5), with the normal syntax that I would use to monitor any > other extension in Freeswitch. Although the SD's work great for sending a > call to, and picking a call up from, each parking spot, it would be > extremely handy if each spot could send BLF updates so as to indicate when > someone was actively parked in that spot. So if I send someone to spot 6003, > the SD key for 6003 would light up with the BLF function that a normal > extension can be monitored with. > > I'm just curious whether anyone has seen this working or created similar > functionality a different way. > > Thanks! > > Randy > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > -- *Regards, Masood Ahmed *

1 0

My new web utility - Windows 7 gadget
by Valery Kalinin 04 Oct '11

04 Oct '11

I offer you my new web application for FreeSWITCH. This simple utility runs as a gadget for Windows 7 or Vista. When a call comes in, it displays a window with the name of the caller. If desired, the program can be customized to integrate with your CRM system or Helpdesk. Download at: https://sites.google.com/site/freeswitched/home/downloads It consists of two parts: server and client. The server part - a simple script fscp.php hosted on your web server that has access to the server FreeSWITCH. Allowing access to FreeSWITCH at the beginning of the file. These are the three variables: $FreeSWITCHserver = '127 .0.0.1 '; $FreeSWITCHport = 8021; $FreeSWITCHpassword = 'ClueCon'; The client part is made as a gadget for Windows 7/Vista. At its first launch should proceed with setup, specifying: Server address: Full address of the script fscp.php, for example: http://192.168.0.1/fscp.php Account: Account in FreeSWITCH, which calls for will be tracked, for example: 1000. When a call window will be displayed by means of VBScript (modal) or Javascript (the usual). Tests and features are welcome!

4 4

RTCP packets not written
by Madovsky 04 Oct '11

04 Oct '11

Hi, I noticed 2011-10-04 14:24:28.512366 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:24:33.512388 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:24:38.512378 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:24:43.512390 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:24:48.512362 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:24:53.512375 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:24:58.512364 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:03.512369 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:08.512386 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:13.512390 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:18.512364 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:23.512376 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:28.512366 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:33.512365 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:38.512368 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:43.512372 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:48.512366 [DEBUG] switch_rtp.c:3910 RTCP packet not written 2011-10-04 14:25:53.512367 [DEBUG] switch_rtp.c:3910 RTCP packet not written is it come from a permission file somewhere ? Thanks

1 0