November 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

mod_fifo vs mod_callcenter
by Eugene Prokopiev 07 Dec '10

07 Dec '10

Hi, No mod_fifo nor mod_сallсenter not fit me completely. There are no strategy option in mod_fifo, so incoming calls are distributed to agents unfairly. There are no something like "fifo in" and "fifo out wait" in mod_сallсenter. It it can be implemented with "callcenter_config agent add" and "callcenter_config tier add" but it is impossible to execute "callcenter_config agent del" and "callcenter_config tier del" automatically after agent hungup. Whether there are plans to add something like strategy option to mod_fifo or simplify mod_сallсenter usage? -- Thanks, Eugene Prokopiev

2 4

Problem with SIP 180 + FreeTDM
by Juan Antonio Ibañez Santorum 06 Dec '10

06 Dec '10

Hello boys! I have one problem after updating from openzap to freetdm. Now, whe FS receives 'Proceeding' from PRI sends a SIP 180 which makes the phone to play a fake ring tone. After some seconds, when FS receives 'Alerting' from PRI, FS sends a SIP 183 with the real ring tone. Is there any way to avoid first SIP 180? If the calle is busy, I can hear a ringing tone between SIP 180 and SIP 183 and a busy tone after SIP 183. Same if calle is a mobile phone and it is out of signal. Regards

3 9

building mod_managed fails
by babak yakhchali 04 Dec '10

04 Dec '10

Hi I'm trying to build mod_managed using mono on centos 5.5. I'm building mono from source and when I try with versions above 2.6 it complains about glib.h and with mono 2.4 it results in errors: error CS1110: `System.Linq.EnumerableExtensions.ForEach<T>(this System.Collections.Generic.IEnumerable<T>, System.Action<T>)': Extension methods cannot be declared without a reference to System.Core.dll assembly. Add the assembly reference or remove `this' modifer from the first parameter Loader.cs(110,16): error CS0246: The type or namespace name `HashSet`1' could not be found. Are you missing a using directive or an assembly reference? Log.cs(57,23): error CS1110: `FreeSWITCH.Log.ToLogString(this FreeSWITCH.LogLevel)': Extension methods cannot be declared without a reference to System.Core.dll assembly. Add the assembly reference or remove `this' modifer from the first parameter ManagedSession.cs(75,16): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? ManagedSession.cs(89,16): error CS0246: The type or namespace name `Func`3' could not be found. Are you missing a using directive or an assembly reference? ManagedSession.cs(91,16): error CS0246: The type or namespace name `Func`2' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(76,9): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(77,44): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(90,18): error CS0246: The type or namespace name `Func`1' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(92,69): error CS0246: The type or namespace name `Func`1' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(122,18): error CS0246: The type or namespace name `Func`1' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(124,69): error CS0246: The type or namespace name `Func`1' could not be found. Are you missing a using directive or an assembly reference? PluginManager.cs(262,23): error CS0246: The type or namespace name `Func`1' could not be found. Are you missing a using directive or an assembly reference? ScriptPluginManager.cs(236,16): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? ScriptPluginManager.cs(187,22): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? ScriptPluginManager.cs(188,37): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? ScriptPluginManager.cs(218,22): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? ScriptPluginManager.cs(219,37): error CS0246: The type or namespace name `Action' could not be found. Are you missing a using directive or an assembly reference? Util.cs(42,25): error CS1110: `FreeSWITCH.FSUtil.CreateSwigTypePointer<T>(this System.IntPtr)': Extension methods cannot be declared without a reference to System.Core.dll assembly. Add the assembly reference or remove `this' modifer from the first parameter XmlSearchBinding.cs(81,40): error CS0246: The type or namespace name `Func`2' could not be found. Are you missing a using directive or an assembly reference? Compilation failed: 20 error(s), 0 warnings make[5]: *** [FreeSWITCH.Managed.dll] Error 1 thanks

5 9

Nibblebill
by Francis Trevor 03 Dec '10

03 Dec '10

Is it possible to bill two separate nibblebill accounts from the same dialplan entry? For instance, can I bill a customer and a vendor account I have in Nibblebill during the same call with different rates? This would be useful in a wholesale scenario. Further, if that isnt possible, can a call be posted to two separate account codes, so as to create an entry in two separate CDR files. Ultimately what I am wanting to accomplish is to make accounting entries in a customer and a vendor account for the same call. I can rate them later, but it would be useful to not have to query the master CDR file for TP's. Am I going about this in a rather complicated way and/or is my logic not lucid enough? Thoughts? TGF

2 1

is mod_python supported on windows?
by jun yang 02 Dec '10

02 Dec '10

just don't find the instructions on how to build it. wiki is about on linux only.

2 1

Re: [Freeswitch-users] FreeSWITCH, FreeTDM, Windows
by Mikhail Zhirnov 02 Dec '10

02 Dec '10

Hello! Could you please help me to solve error with FreeSWITCH, FreeTDM on Windows XP SP3 machine. I used wiki http://wiki.sangoma.com/wanpipe-api-freetdm . I installed Wanpipe and then compiled FreeSWITCH, FreeTDM by Visual Studio 2010. FreeSWITCH is fine but it couldn't load FreeTDM module with error: *freeswitch@prodan-a> reload freetdm* *2010-11-29 17:18:33.437500 [INFO] mod_enum.c:808 ENUM Reloaded* * * *-ERR unloading module [No such module!]* *+OK Reloading XML* *-ERR loading module [module load file routine returned an error]* * * *2010-11-29 17:18:33.437500 [CRIT] switch_loadable_module.c:928 Error Loading module D:\sangoma\FS_GIT\FS_GIT\Win32\Debug\mod\freetdm.dll* ***dll sym error [127l]* **** *2010-11-29 17:18:33.437500 [INFO] switch_time.c:950 Timezone reloaded 530 definitions* I used the latest FreeSWITCH from GIT. _____________________ Best regards, Mikhail Zhirnov michaeal(a)gmail.com Skype "Chudack"

2 1

"No Digits to send" on purpose?
by Jeroen C. van Gelderen 02 Dec '10

02 Dec '10

Hi Guys, I need to bridge an FXS port (when taken off-hook) to an FXO port without dialing any digits like so: <action application="bridge" data="freetdm/span_fxo_csd/1"/> This results in the following error: ftmod/ftmod_analog/ftmod_analog.c: if (ftdm_strlen_zero(ftdmchan->caller_data.dnis.digits)) { ftdm_log_chan_msg(ftdmchan, FTDM_LOG_ERROR, "No Digits to send!\n"); For now I have worked around this by using <action application="bridge" data="freetdm/span_fxo_csd/1/w"/> or <action application="bridge" data="freetdm/span_fxo_csd/1/F"/> I would like to avoid the unnecessary delay this incurs. Any suggestions? Under what circumstances is it bad to send zero digits? Can I simply take out the check for zero-length dnis.digits? Cheers, -Slim -- Jeroen C. "Slim" van Gelderen

5 6

: Skypopen error
by Jian Ren 02 Dec '10

02 Dec '10

Could anyone tell me what's this error about? It happened to me quite often. 2010-11-18 20:45:52.690158 [ERR] skypopen_protocol.c:259 [|] [ERRORA 259 ][interface00 ][UP,INPROGRS] Skype got ERROR: |||ERROR 21 Unknown/disallowed call prop||| 2010-11-18 20:45:52.690158 [ERR] skypopen_protocol.c:261 [|] [ERRORA 261 ][interface00 ][UP,FNSHED] skype_call now is DOWN Thanks! Jian

5 18

send fax
by Madovsky 02 Dec '10

02 Dec '10

Hi All, I'm currently playing with send a fax like this : /usr/local/freeswitch/bin/fs_cli -x "originate {originate_caller_id_number=9999999999999,fax_enable_t38=true,fax_enable_t38_request=true,absolute_codec_string=PCMU,nibble_account=9999999999999,nibble_rate=(lcr(1111111111111)*2.3)}sofia/gateway/trunk/1111111111111 &txfax(/usr/local/freeswitch/storage/FAX/test/test.tiff)" but it seems that the originate command line has chars length limit, so the command line is trunkated and give this result : 2010-11-28 12:15:24.929729 [ERR] mod_spandsp_fax.c:1019 Cannot send non-existant fax file [/usr/local/fre] also do I need to set tot true T38 the 2 vars if my trunkn is T38 compatible ? I noticed that send a fax has not a high percentage of success. Any help would be appreciated Franck

2 2

mod_spandsp fax question
by Madovsky 02 Dec '10

02 Dec '10

Hi, is there any way to send multiple fax pages with one call with originate and &txfax() ? Thanks Franck

3 3