November 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

OS X compile error
by James Budge 20 Nov '09

20 Nov '09

make[6]: *** [mod_amr.so] Error 1 make[5]: *** [all] Error 1 make[4]: *** [mod_amr-all] Error 1 make[3]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[2]: *** [all-recursive] Error 1 make[1]: *** [all] Error 2 make: *** [current] Error 2 OS X 10.6.2 Xcode 3.2.1 FS Updated to revision 15582

2 1

mod_flite sound profiles
by Malay Thakershi 20 Nov '09

20 Nov '09

Hello all, I am not able to play any female sound in mod_flite. I did try setting all 4 voice types one by one but it only says male voice. And the voice quality is not good at all. Am I doing something wrong? mObjMainSession.Answer(); mObjMainSession.sleep(1000, 0); //set tts engine mObjMainSession.SetTtsParameters("flite", "awb"); //Introduction message mObjMainSession.Speak("Hello... Welcome to phone system for assessment"); mObjMainSession.sleep(1000, 0); Also, can someone tell me what is the best way to get TTS going with good quality? Thank you for help. Malay Thakershi

1 0

phpmod fails to make
by Costa Zikalala 20 Nov '09

20 Nov '09

I've been trying to make phpmod without any success. I've even tried to ./configure --with-php and it did't help. I've just upgraded to latest svn and am running FS on FC11. I keep getting this error message: make: php-config: Command not found g++ -Wno-unused-label -Wno-unused-function -c esl_wrap.cpp -o esl_wrap.o esl_wrap.cpp:717:18: error: zend.h: No such file or directory esl_wrap.cpp:718:22: error: zend_API.h: No such file or directory esl_wrap.cpp:719:17: error: php.h: No such file or directory esl_wrap.cpp:972:21: error: php_ini.h: No such file or directory esl_wrap.cpp:973:31: error: ext/standard/info.h: No such file or directory esl_wrap.cpp:980:17: error: esl.h: No such file or directory esl_wrap.cpp:981:21: error: esl_oop.h: No such file or directory esl_wrap.cpp:767: error: ‘E_ERROR’ was not declared in this scope esl_wrap.cpp:788: error: ISO C++ forbids declaration of ‘ZEND_RSRC_DTOR_FUNC’ with no type esl_wrap.cpp:788: error: ‘SWIG_landfill’ was not declared in this scope esl_wrap.cpp:788: error: expected ‘,’ or ‘;’ before ‘{’ token esl_wrap.cpp:793: error: variable or field ‘SWIG_ZTS_SetPointerZval’ declared void esl_wrap.cpp:793: error: ‘zval’ was not declared in this scope esl_wrap.cpp:793: error: ‘z’ was not declared in this scope esl_wrap.cpp:793: error: expected primary-expression before ‘void’ esl_wrap.cpp:793: error: expected primary-expression before ‘*’ token esl_wrap.cpp:793: error: ‘type’ was not declared in this scope esl_wrap.cpp:793: error: expected primary-expression before ‘int’ make: *** [esl_wrap.o] Error 1 Please help. Thanks Costa

4 6

APT Utility
by David V. Fansler 20 Nov '09

20 Nov '09

Greetings - I am trying to startup a freeSwitch on a P4 running Ubuntu 9.04 "Jaunty". I know very little about Linux. I decided to try this after reading the article in Linux Pro Magazine. I have been following the detailed instructions in the wiki for using Ubuntu Jaunty, however I have run into an unknown - "Use your favorite APT utility to get the needed packages". I am good at following direct instructions - but this statement is too vague for my minimal minimal - did I mention minimal - knowledge of Linux. Could someone please give me detailed instructions on how to use APT utility to get the needed packages - and what are the needed packages? Thanks kindly, David David V. Fansler s/v Annabelle dfansler(a)dv-fansler.com www.dv-fansler.com

4 7

Call doesn't work while registration work for a VOIP provider
by Albano Daniele Salvatore - Lavoro 20 Nov '09

20 Nov '09

Hi, i'm trying to configure freeswitch with a VOIP provider, exsorsa, that uses OpenSER. Exsorsa use as own gateway, another provider, Eutelia, that it uses Cisco (or, at least, this appears in headers). Short story: ------------ If i try to setup my Eutelia account all works perfectly while if i try to setup Exsorsa account registration works fine while calling not: when fs send the ACK, as answer to a OK (sip code 200), that is sended from exsorsa as answer to an INVITE, exsorsa send back a BYE. Long story: ----------- I put call log on pastebin with debug and sip_trace enabled for external sip_profile and with log level on debug on fs console. Registration log, here all is ok (or at least it seems to be ok) http://pastebin.freeswitch.org/11176 Annoyng message that comes up every 30 seconds http://pastebin.freeswitch.org/11177 Call log http://pastebin.freeswitch.org/11178 As you can see from call log all works fine until fs send back the acknowledgment message (line 451 on last log). Can this depend on the annoyng message that comes up every 30 seconds? Here my external sip profile config http://pastebin.freeswitch.org/11180 while here exsorsa gateway config http://pastebin.freeswitch.org/11181 Any helps is really appreciated! I'm fought with it all the day!!! Best Regards, Daniele

2 3

TFTP Server & Cisco 7540
by Dave Stevenson 20 Nov '09

20 Nov '09

Hi, I have just about got FreeSwitch working with a Cisco 7940 Phone. After much reading, I worked out that I needed a TFTP server on the network that would supply the phone with it's SIP personality and config etc. I have been able to get the phone working and realise that the TFTP server needs to be available every time the phone loses power etc. At the moment, I have the TFTP server running on a temporary machine but it would be neater if it ran on the same machine as FreeSwitch. This will be a very small FreeSwitch installation, so, ....... Is there any reason why I should not try to run FreeSwitch and the SolarWinds Free TFTP Server on the same Windows XP Machine ? I don't think the server should put much load on the machine but wondered if there were any other reasons why this is a bad idea ? In addition, while I have the phone working - I get a status message on boot ... "W310 2 Errors(s) Parsing SIPDefault.cnf Can anyone tell me how to locate the errors in this file please ? (I have posted it to the Pastebin) Regards Dave

6 13

mod_bv16/32 removed. Added mod_bv
by Brian West 20 Nov '09

20 Nov '09

We have removed the two modules using the reference code from BroadVoice and added a lib with a new interface from Steve Underwood and mod_bv.c using this lib... We know their is ONE last bug to be fixed in the lib before its working so please do not open any jira's if you try to run it because it will crash right now. Thanks for your understanding and once this is fixed it'll work with aastra and x-lite on both 32bit and 64bit systems without any issues. Thanks, Brian West

3 4

Another Group Question - on VoiceMail
by Dave Stevenson 20 Nov '09

20 Nov '09

Hi again ! I have FreeSwitch configured such that if someone dials in from the PSTN line, a group of phones ring. If nobody answers, the group extension number (100) picks up the call and voice mail kicks in. So far, so good, each of the individual phones logs a missed call and anyone in the group can call into voice mail and go to the extension 100 mailbox to check if there are any messages but the individual phones are not notified that a Voice message is waiting. Is there any way that each extension in the group can be notified that a group Voice Mail is waiting to be picked up so that each phone shows the message waiting indication ? Regards Dave

3 3

upgrading to latest SVN
by Ujjval Karihaloo 20 Nov '09

20 Nov '09

Getting error below..not sure whats wrong..which line number in what file does this refer to? [root@ss_freeswitch log]# freeswitch 2009-11-19 20:15:44.725118 [INFO] switch_event.c:568 Activate Eventing Engine. 2009-11-19 20:15:44.727095 [DEBUG] switch_event.c:556 Create event dispatch thread 0 Cannot Initialize [[error near line 733]: missing >]

3 5

Setting up Conference with Moderator
by Ujjval Karihaloo 20 Nov '09

20 Nov '09

Hi I have the Basic Conferencing working. Here is my Dial Plan. I want to be able to setup a Moderator PIN different from other participants, when I add the moderator flag it logs me in directly w/o asking for a PIN.. action application="conference" data="conference.conf@wideband+flags{moderator}+159753<mailto:conference.conf@wideband+flags%7bmoderator%7d+159753>"/> DialPlan is below for the normal user, and it asks for the PIN with below settings. Ujj Inbound from SS - start --> <extension name="simplesignal">  <condition field="destination_number" expression="2142349127">  <action application="conference" data="conference.conf@wideband+159753<mailto:conference.conf@wideband+159753>"/> </condition> </extension> <!-- Ujj Inbound from SS - end And I am using the existing conference.conf.xml file in the auto_loads directory. Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690 SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 [cid:image001.jpg@01CA535A.E43E9870]<http://www.simplesignal.com/>

8 29