Hi I have the Basic Conferencing working. Here is my Dial Plan. I want to be able to setup a Moderator PIN different from other participants, when I add the moderator flag it logs me in directly w/o asking for a PIN.. action application="conference" data="conference.conf@wideband+flags{moderator}+159753<mailto:conference.conf@wideband+flags%7bmoderator%7d+159753>"/> DialPlan is below for the normal user, and it asks for the PIN with below settings. Ujj Inbound from SS - start --> <extension name="simplesignal"> <!-- your provider or any name you'd like to call it --> <condition field="destination_number" expression="2142349127"> <!-- your DID for this gateway--> <action application="conference" data="conference.conf@wideband+159753<mailto:conference.conf@wideband+159753>"/> </condition> </extension> <!-- Ujj Inbound from SS - end And I am using the existing conference.conf.xml file in the auto_loads directory. Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690 SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 [cid:image001.jpg@01CA535A.E43E9870]<http://www.simplesignal.com/>
Any ideas on this one. Look slike only way rite now is to have a different Dest Phone number for a moderator. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ujjval Karihaloo Sent: Thursday, October 22, 2009 9:02 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Setting up Conference with Moderator Hi I have the Basic Conferencing working. Here is my Dial Plan. I want to be able to setup a Moderator PIN different from other participants, when I add the moderator flag it logs me in directly w/o asking for a PIN.. action application="conference" data="conference.conf@wideband+flags{moderator}+159753<mailto:conference.conf@wideband+flags%7bmoderator%7d+159753>"/> DialPlan is below for the normal user, and it asks for the PIN with below settings. Ujj Inbound from SS - start --> <extension name="simplesignal"> <!-- your provider or any name you'd like to call it --> <condition field="destination_number" expression="2142349127"> <!-- your DID for this gateway--> <action application="conference" data="conference.conf@wideband+159753<mailto:conference.conf@wideband+159753>"/> </condition> </extension> <!-- Ujj Inbound from SS - end And I am using the existing conference.conf.xml file in the auto_loads directory. Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690 SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 [cid:image001.jpg@01CA53CF.3D2B8B40]<http://www.simplesignal.com/>
The first caller isn't challenged for the pin (don't really know why-- maybe somebody else can elaborate on how the pin is designed to be used). So to work around it, I validate the conference pin and moderator pin independently via an IVR (or dynamically with a script and odbc call) then put them in the conference with the right profile and flags. Here is a simple example (I created these wavs so they aren't in your default setup but you can get the idea): in ivr.conf: <menu name="conference_menu" greet-long="welcome_please_enter_conference_pin.wav" greet-short="check_and_try_again.wav" invalid-sound="passcode_invalid.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="7"> <entry action="menu-sub" digits="123456" param="conference_123456_moderator_menu" /> <!-- conference moderator menu --> </menu> <menu name="conference_123456_moderator_menu" greet- long = "conference_confirmed_enter_moderator_pin_or_1_to_join_as_participant .wav" greet-short="check_moderator_pin_or_1_to_join.wav" invalid-sound="invalid_moderator_pin.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="5"> <entry action="menu-exec-app" digits="1234" param="conference 123456@default+flags{moderator}" /> <entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" /> </menu> You also need to add the "wait-mod" conference-flag to the conference profile if you want to allow participants to join but not let them talk until the moderator arrives. In conference.conf.xml add to the profile you're using (default in this example): <param name="conference-flags" value="wait-mod" /> From your public dial plan call the IVR or script: <action application="ivr" data="conference_menu" /> Now you should be able to call, enter a conference number of 123456 and sit listening to music until the moderator joins (using pin 1234) and starts the call. Maybe I completely misunderstood the built-in pin system but since the first person isn't challenged I had to do it this way. Good luck! Rob On Oct 23, 2009, at 11:54 AM, Ujjval Karihaloo wrote:
Any ideas on this one. Look slike only way rite now is to have a different Dest Phone number for a moderator.
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Thursday, October 22, 2009 9:02 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Setting up Conference with Moderator
Hi
I have the Basic Conferencing working. Here is my Dial Plan.
I want to be able to setup a Moderator PIN different from other participants, when I add the moderator flag it logs me in directly w/ o asking for a PIN.. action application="conference" data="conference.conf@wideband +flags{moderator}+159753"/>
DialPlan is below for the normal user, and it asks for the PIN with below settings.
Ujj Inbound from SS - start --> <extension name="simplesignal"> <!-- your provider or any name you'd like to call it --> <condition field="destination_number" expression="2142349127"> <!-- your DID for this gateway--> <action application="conference" data="conference.conf@wideband+159753"/> </condition> </extension>
<!-- Ujj Inbound from SS – end
And I am using the existing conference.conf.xml file in the auto_loads directory.
Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690
SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 <image001.jpg>
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Well first off you're not defining a pine here... confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number] That might be why its not asking for a pin. /b On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
Right- this was an example without using the built-in pin but instead using IVR. On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I just re-tested with the pin in my dial plan: <action application="conference" data="conference 123456@default +flags{}+1234" /> And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]: "The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. " The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it. Rob On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ====================== I will try it out. Again thx a lot for your help. Will keep everyone posted. ________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator I just re-tested with the pin in my dial plan: <action application="conference" data="conference 123456@default +flags{}+1234" /> And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]: "The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. " The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it. Rob On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Rob: For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout. UK -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ====================== I will try it out. Again thx a lot for your help. Will keep everyone posted. ________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator I just re-tested with the pin in my dial plan: <action application="conference" data="conference 123456@default +flags{}+1234" /> And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]: "The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. " The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it. Rob On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through. Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through. Rob On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through. Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through. Rob On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level? On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Have you answered the call? On Oct 30, 2009, at 11:34 AM, Rob Forman wrote:
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
Yes, I think I did. However here is what furthur testing revelas. If I dial in from AT&T cell phone, I do not see any DTMF using Don's IVR.xml.conf to call my conf app. But when I dial the same number using a Verizon Cell, it works. When I dial a number that is provisioned to call the Conf App directly from the public.xml dialplan...it works even with the same AT&T cell phone... Strange behaviour ________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris [mike@jerris.com] Sent: Saturday, October 31, 2009 11:33 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Have you answered the call? On Oct 30, 2009, at 11:34 AM, Rob Forman wrote:
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
you know I have heard this before... It seems to ONLY be AT&T /b On Nov 2, 2009, at 9:54 AM, Ujjval Karihaloo wrote:
Yes, I think I did. However here is what furthur testing revelas. If I dial in from AT&T cell phone, I do not see any DTMF using Don's IVR.xml.conf to call my conf app. But when I dial the same number using a Verizon Cell, it works.
When I dial a number that is provisioned to call the Conf App directly from the public.xml dialplan...it works even with the same AT&T cell phone...
Strange behaviour
Was that sarcasm or you really mean it? -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: Monday, November 02, 2009 9:08 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator you know I have heard this before... It seems to ONLY be AT&T /b On Nov 2, 2009, at 9:54 AM, Ujjval Karihaloo wrote:
Yes, I think I did. However here is what furthur testing revelas. If I dial in from AT&T cell phone, I do not see any DTMF using Don's IVR.xml.conf to call my conf app. But when I dial the same number using a Verizon Cell, it works.
When I dial a number that is provisioned to call the Conf App directly from the public.xml dialplan...it works even with the same AT&T cell phone...
Strange behaviour
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Interesting...Thx for the heads up. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Wednesday, November 04, 2009 10:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator On Tue, Nov 3, 2009 at 6:27 PM, Ujjval Karihaloo <ujjval@simplesignal.com<mailto:ujjval@simplesignal.com>> wrote: Was that sarcasm or you really mean it? No, he's serious. There are some issues that are quite endemic to AT&T. -MC
OK, I may have solved this mystery, if I use application=answer and answer the call before the IVR which then flows into the Conference app, DTMF works from the AT&T phone.. So, if you face issues with Conferencing/IVR, answer the call before you invoke those apps... Problem I have now is that a Polycom old phone like 501s are not doing DTMF 2833 to the Freeswitch server...has anyone seen this..Call is not going thru PSTN...its IP to IP Polycom 501 through our SBC to the Freeswitch Server. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: Monday, November 02, 2009 9:08 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator you know I have heard this before... It seems to ONLY be AT&T /b On Nov 2, 2009, at 9:54 AM, Ujjval Karihaloo wrote:
Yes, I think I did. However here is what furthur testing revelas. If I dial in from AT&T cell phone, I do not see any DTMF using Don's IVR.xml.conf to call my conf app. But when I dial the same number using a Verizon Cell, it works.
When I dial a number that is provisioned to call the Conf App directly from the public.xml dialplan...it works even with the same AT&T cell phone...
Strange behaviour
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Rob: Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like? Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690 SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level? On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Any ideas on the below...has anyone implemented the below: Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like? -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Rob: Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like? -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level? On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi UK, From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it. The wiki seems to indicate this as well: "Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ." http://wiki.freeswitch.org/wiki/Mod_conference I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this. Cheers, Rob On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This is true, BUT it is more flexible than it looks. http://wiki.freeswitch.org/wiki/Mod_conference#.3Ccaller-controls.3E The caller controls can have a key execute a dialplan extension: execute_application You can set a channel var on the moderator prior to joining to the conf. When the extenion is called, you can check the channel var for moderator and act accordingly. Or you can send an event and monitor with an app over ESL and do whatever you want there (probably using the same channel var trick for knowing who is a mod or not). On Thu, Nov 5, 2009 at 8:52 AM, Rob Forman <rob4manhere@gmail.com> wrote:
Hi UK,
From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it.
The wiki seems to indicate this as well:
"Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ."
http://wiki.freeswitch.org/wiki/Mod_conference
I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this.
Cheers, Rob
On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
Any examples I can refer to for this? Like for Channel vars and execute_application calls? Does this all need to be doen in dialplan.public.xml or also in other config files? Sorry: I am still learning the Freeswitch world. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rupa Schomaker Sent: Thursday, November 05, 2009 8:56 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator This is true, BUT it is more flexible than it looks. http://wiki.freeswitch.org/wiki/Mod_conference#.3Ccaller-controls.3E The caller controls can have a key execute a dialplan extension: execute_application You can set a channel var on the moderator prior to joining to the conf. When the extenion is called, you can check the channel var for moderator and act accordingly. Or you can send an event and monitor with an app over ESL and do whatever you want there (probably using the same channel var trick for knowing who is a mod or not). On Thu, Nov 5, 2009 at 8:52 AM, Rob Forman <rob4manhere@gmail.com> wrote:
Hi UK,
From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it.
The wiki seems to indicate this as well:
"Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ."
http://wiki.freeswitch.org/wiki/Mod_conference
I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this.
Cheers, Rob
On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Fri, Nov 6, 2009 at 7:59 AM, Ujjval Karihaloo <ujjval@simplesignal.com> wrote:
Any examples I can refer to for this?
not that i know of
Like for Channel vars and execute_application calls? Does this all need to be doen in dialplan.public.xml or also in other config files?
most can be done in public.xml if you want to do it all in dialplan.
Sorry: I am still learning the Freeswitch world.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rupa Schomaker Sent: Thursday, November 05, 2009 8:56 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
This is true, BUT it is more flexible than it looks.
http://wiki.freeswitch.org/wiki/Mod_conference#.3Ccaller-controls.3E
The caller controls can have a key execute a dialplan extension: execute_application You can set a channel var on the moderator prior to joining to the conf. When the extenion is called, you can check the channel var for moderator and act accordingly.
Or you can send an event and monitor with an app over ESL and do whatever you want there (probably using the same channel var trick for knowing who is a mod or not).
On Thu, Nov 5, 2009 at 8:52 AM, Rob Forman <rob4manhere@gmail.com> wrote:
Hi UK,
From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it.
The wiki seems to indicate this as well:
"Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ."
http://wiki.freeswitch.org/wiki/Mod_conference
I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this.
Cheers, Rob
On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
> <entry action="menu-exec-app" digits="1" param="conference > 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
I have used the following setting in ivr.conf.xml to setup conferencing with moderator. However, the issue I have is - the user enters 123456 and then say if it's a moderator they enter wrong Moderator PIN 3 times then it takes the user back to the main menu..."conference_menu" and asks for main conf pin (123456) once again. I would like the caller to be disconnected if they get into the Moderator menu and enter wrong Moderator PIN 3 times. <menu name="conference_menu" greet-long="welcome_please_enter_conference_pin.wav" greet-short="check_and_try_again.wav" invalid-sound="passcode_invalid.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="7"> <entry action="menu-sub" digits="123456" param="conference_123456_moderator_menu" /> <!-- conference moderator menu --> </menu> <menu name="conference_123456_moderator_menu" greet-long="conference_confirmed_enter_moderator_pin_or_1_to_join_as_participant.wav" greet-short="check_moderator_pin_or_1_to_join.wav" invalid-sound="invalid_moderator_pin.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="5"> <entry action="menu-exec-app" digits="1234" param="conference 123456@default+flags{moderator}" /> <entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" /> </menu> </menus> Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690 SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman Sent: Thursday, November 05, 2009 7:52 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Hi UK, From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it. The wiki seems to indicate this as well: "Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ." http://wiki.freeswitch.org/wiki/Mod_conference I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this. Cheers, Rob On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi again UK, IVR is designed to naturally return to previous or top menus. I don't think there's a way to change this default behavior. Maybe its time to move to a script-based pin validation system so you have the full control you need. http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR Rob On Nov 18, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
I have used the following setting in ivr.conf.xml to setup conferencing with moderator.
However, the issue I have is - the user enters 123456 and then say if it's a moderator they enter wrong Moderator PIN 3 times then it takes the user back to the main menu..."conference_menu" and asks for main conf pin (123456) once again.
I would like the caller to be disconnected if they get into the Moderator menu and enter wrong Moderator PIN 3 times.
<menu name="conference_menu" greet-long="welcome_please_enter_conference_pin.wav" greet-short="check_and_try_again.wav" invalid-sound="passcode_invalid.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="7"> <entry action="menu-sub" digits="123456" param="conference_123456_moderator_menu" /> <!-- conference moderator menu --> </menu>
<menu name="conference_123456_moderator_menu" greet- long = "conference_confirmed_enter_moderator_pin_or_1_to_join_as_participant .wav" greet-short="check_moderator_pin_or_1_to_join.wav" invalid-sound="invalid_moderator_pin.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="5"> <entry action="menu-exec-app" digits="1234" param="conference 123456@default+flags{moderator}" /> <entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" /> </menu>
</menus>
Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690
SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Thursday, November 05, 2009 7:52 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hi UK,
From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it.
The wiki seems to indicate this as well:
"Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ."
http://wiki.freeswitch.org/wiki/Mod_conference
I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this.
Cheers, Rob
On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Greetings, I'm a new freeswitch user and am wondering what people do when setting options in the freeswitch config files. Do people use special tools, XML editors etc or is it just vi/emacs/Kate? I'm a developer and was thinking of putting together a small editor to manage my freeswitch server, something like freepbx, I know it's not an easy undertaking but I'm sure it's well worth it. Regards, Samuel Mukoti CEO Melivo Business Systems Mobile: +263912739405 Email: sam@melivo.com Skype: samuelmukoti Twitter: twitter.com/samuelmukoti On 19 Nov,2009, at 8:02 AM, Rob Forman <rob4manhere@gmail.com> wrote:
Hi again UK,
IVR is designed to naturally return to previous or top menus. I don't think there's a way to change this default behavior. Maybe its time to move to a script-based pin validation system so you have the full control you need.
http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR
Rob
On Nov 18, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
I have used the following setting in ivr.conf.xml to setup conferencing with moderator.
However, the issue I have is - the user enters 123456 and then say if it's a moderator they enter wrong Moderator PIN 3 times then it takes the user back to the main menu..."conference_menu" and asks for main conf pin (123456) once again.
I would like the caller to be disconnected if they get into the Moderator menu and enter wrong Moderator PIN 3 times.
<menu name="conference_menu" greet-long="welcome_please_enter_conference_pin.wav" greet-short="check_and_try_again.wav" invalid-sound="passcode_invalid.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="7"> <entry action="menu-sub" digits="123456" param="conference_123456_moderator_menu" /> <!-- conference moderator menu --> </menu>
<menu name="conference_123456_moderator_menu" greet- long = "conference_confirmed_enter_moderator_pin_or_1_to_join_as_participant .wav" greet-short="check_moderator_pin_or_1_to_join.wav" invalid-sound="invalid_moderator_pin.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="5"> <entry action="menu-exec-app" digits="1234" param="conference 123456@default+flags{moderator}" /> <entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" /> </menu>
</menus>
Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690
SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Thursday, November 05, 2009 7:52 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hi UK,
From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it.
The wiki seems to indicate this as well:
"Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ."
http://wiki.freeswitch.org/wiki/Mod_conference
I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this.
Cheers, Rob
On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch- users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
> <entry action="menu-exec-app" digits="1" param="conference > 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
Samuel Mukoti <samuelmukoti@gmail.com> wrote:
I'm a new freeswitch user and am wondering what people do when setting options in the freeswitch config files. Do people use special tools, XML editors etc or is it just vi/emacs/Kate?
Emacs has an XML editing mode; Vim may have extensions for handling XML as well. However, I have not found it necessary to invoke the XML features of an editor; just treating the configuration files as plain text is sufficient.
Cool, I will explore that option when I have some time. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Forman Sent: Wednesday, November 18, 2009 11:02 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator Hi again UK, IVR is designed to naturally return to previous or top menus. I don't think there's a way to change this default behavior. Maybe its time to move to a script-based pin validation system so you have the full control you need. http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR Rob On Nov 18, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
I have used the following setting in ivr.conf.xml to setup conferencing with moderator.
However, the issue I have is - the user enters 123456 and then say if it's a moderator they enter wrong Moderator PIN 3 times then it takes the user back to the main menu..."conference_menu" and asks for main conf pin (123456) once again.
I would like the caller to be disconnected if they get into the Moderator menu and enter wrong Moderator PIN 3 times.
<menu name="conference_menu" greet-long="welcome_please_enter_conference_pin.wav" greet-short="check_and_try_again.wav" invalid-sound="passcode_invalid.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="7"> <entry action="menu-sub" digits="123456" param="conference_123456_moderator_menu" /> <!-- conference moderator menu --> </menu>
<menu name="conference_123456_moderator_menu" greet- long = "conference_confirmed_enter_moderator_pin_or_1_to_join_as_participant .wav" greet-short="check_moderator_pin_or_1_to_join.wav" invalid-sound="invalid_moderator_pin.wav" exit-sound="voicemail/vm-goodbye.wav" timeout="10000" inter-digit-timeout="5000" max-failures="3" max-timeouts="3" digit-len="5"> <entry action="menu-exec-app" digits="1234" param="conference 123456@default+flags{moderator}" /> <entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" /> </menu>
</menus>
Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690
SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Thursday, November 05, 2009 7:52 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hi UK,
From what I've done and read, the caller-controls (in conference.conf.xml) can be modified to almost anything you can think of, BUT, they are mapped 1-to-1 to a conference- ie you can't map a caller control just for those with the moderator flag. So unless you want everyone able to mute/kick everyone then you can't do it.
The wiki seems to indicate this as well:
"Be aware that the caller-controls are applied across the entire conference. You cannot enter one member of the conference using caller- controls ABC and then enter a second member using caller-controls XYZ."
http://wiki.freeswitch.org/wiki/Mod_conference
I think this might be a limitation of mod_conference. Perhaps one of the pros can chime in if I'm off-base or there's some nifty way to accomplish this.
Cheers, Rob
On Nov 4, 2009, at 8:09 PM, Ujjval Karihaloo wrote:
Any ideas on the below...has anyone implemented the below:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, November 02, 2009 12:52 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Rob:
Once I have the Moderator and Participants logged on, how do I invoke the moderator previlidges, LIk esay muting everyone/someone or kicking someone out of the Conf and the like?
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 9:34 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Hm, strange. I haven't seen that before. Can you pastebin your logs at debug level?
On Oct 30, 2009, at 9:43 AM, Ujjval Karihaloo wrote:
It's strange... a tcpdump tells me that there is no DTMF from my provider when using IVR, but when I call into a TN that goes directly into the Conference App, I see DTMF from the provider.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman Sent: Friday, October 30, 2009 7:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I've never had any problem with that. Is your logging at debug level so you can see the RECV DTFM in the log/fs_cli? Are you calling from a SIP phone on the pbx, or via a PSTN provider? Maybe your provider isn't passing them through.
Make sure your logging is turned up then try something simpler, like calling the echo application, and see if DTFM comes through.
Rob
On Oct 29, 2009, at 11:34 PM, Ujjval Karihaloo wrote:
Rob:
For some reason, I don't see the DTMF appear on the fs_CLI when using the below configuration....so it basically timesout.
UK
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Ujjval Karihaloo Sent: Monday, October 26, 2009 9:21 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
Thx a lot Rob, reading the wiki your way or using IVR seems correct.. =============== The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin. ======================
I will try it out.
Again thx a lot for your help. Will keep everyone posted.
________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Rob Forman [rob4manhere@gmail.com] Sent: Friday, October 23, 2009 12:22 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Setting up Conference with Moderator
I just re-tested with the pin in my dial plan:
<action application="conference" data="conference 123456@default +flags{}+1234" />
And it doesn't challenge me for the pin. I just drop right in. I figured this is how it was intended, since the wiki says the pin is set initially and only challenged in later attempts [by future callers]:
"The first time a conference name (confname) is used, it will be created on demand, and the pin will be set to what ever is specified at that time: the pin in the data string if specified, or if not, the "pin" setting in the conference profile, and if that is also unspecified, then there is no pin protection. Any later attempt to join the conference must specify the same pin number, if one existed when it was created. "
The wiki also says that the wait-mod might be "used in conjunction with an IVR where the moderators are authenticated with an extra pass- code", which is what I did. I guess that's why I didn't understand the point of the +pin.
I'm sure there's a scenario where its used and useful, the wiki just doesn't explain it.
Rob
On Oct 23, 2009, at 12:43 PM, Brian West wrote:
Well first off you're not defining a pine here...
confname@profilename+flags{mute|deaf|waste|moderator}+[conference pin number]
That might be why its not asking for a pin.
/b
On Oct 23, 2009, at 12:30 PM, Rob Forman wrote:
<entry action="menu-exec-app" digits="1" param="conference 123456@default+flags{}" />
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
One more try for help for COnferencing using moderator, Anyone successfully accomplished this? Help appreciated! ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ujjval Karihaloo [ujjval@simplesignal.com] Sent: Thursday, October 22, 2009 9:01 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Setting up Conference with Moderator Hi I have the Basic Conferencing working. Here is my Dial Plan. I want to be able to setup a Moderator PIN different from other participants, when I add the moderator flag it logs me in directly w/o asking for a PIN.. action application="conference" data="conference.conf@wideband+flags{moderator}+159753<mailto:conference.conf@wideband+flags%7bmoderator%7d+159753>"/> DialPlan is below for the normal user, and it asks for the PIN with below settings. Ujj Inbound from SS - start --> <extension name="simplesignal"> <!-- your provider or any name you'd like to call it --> <condition field="destination_number" expression="xxxxxxxxxx"> <!-- your DID for this gateway--> <action application="conference" data="conference.conf@wideband+159753<mailto:conference.conf@wideband+159753>"/> </condition> </extension> <!-- Ujj Inbound from SS – end And I am using the existing conference.conf.xml file in the auto_loads directory. Ujjval Karihaloo VP Voice Engineering IP Phone: +13032428610 E-Fax: +17202391690 SimpleSignal Inc. 88 Inverness Circle East Suite K105 Englewood, CO 80112 [cid:image001.jpg@01CA535A.E43E9870]<http://www.simplesignal.com/>
participants (8)
-
Brian West
-
Jason White
-
Michael Collins
-
Michael Jerris
-
Rob Forman
-
Rupa Schomaker
-
Samuel Mukoti
-
Ujjval Karihaloo