October 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Music on hold volume?
by Lon Baker 10 Oct '09

10 Oct '09

Is there a way to adjust the volume of music on hold? Lon

2 1

Questions regarding to mod_nibble
by Ahmed Munir 10 Oct '09

10 Oct '09

I want to ask three questions related to mod_nibble bills, as I'm listing down below; 1- Can we select/use dynamic tables for billing using nibble bill? 2- Can we define more than two tables and attributes in nibblebill.conf.xml? 3- As Nibble bill is use to deduct amount of user account, Can we deduct minutes instead of cash? Because my case is, if a user buy a package and I only want to deducts his/her minutes. How we can resolve it by nibble bill? / What other way we can resolve it? Kindly advise soon. -- Regards, Ahmed Munir

4 3

libpri_span vs prispans
by lakshmanan ganapathy 10 Oct '09

10 Oct '09

Hi all, What difference it will make, if I use pri_span configuration and lib_pri span configuration in openzap.conf.xml. I'm preety much confused on the difference between this.

4 4

Difference between park and valet_park
by velusamy velu 10 Oct '09

10 Oct '09

Dear All, Could you please any one explain the difference between parking and valet parking?

4 3

Anyone intairaisted?
by Meftah Tayeb 10 Oct '09

10 Oct '09

dear all anyone intairaisted in porting/integrating some billing engine/software to freeswitch? we are building a new Community for that no for billing only but billing is the primary focus if anyone intairaisted please mail me to: tayeb.meftah(a)gmail.com i'm waiting for you to join! the web site is not yet ready, is: http://www.awesomevoip.org we have also a hosted PBX to do conferencing... but we need a conference bridge thanks! __________ Information from ESET NOD32 Antivirus, version of virus signature database 4494 (20091009) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

1 0

FW: FS Does Not Relay PresencePUBLISHToSubscribing Phones
by Jerry Richards 09 Oct '09

09 Oct '09

I put the sqlite3 select query in the paste bin again, and prior to that, I entered the .dump command. The select command came back with the sqlite3 prompt, which I guess means it didn't find an entry. How do I go about isolating this problem? I'm using CounterPath's Bria Professional softphone. They are the same company that make the Eyebeam. Any ideas? Best Regards, Jerry _____ From: Jerry Richards [mailto:jerry.richards@teotech.com] Sent: Friday, October 02, 2009 11:28 AM To: 'freeswitch-users(a)lists.freeswitch.org' Subject: RE: [Freeswitch-users] FS Does Not Relay PresencePUBLISHToSubscribing Phones I put the sqlite3 select query in the paste bin, and prior to that, I entered the .dump command. The select command came back with a "...>" prompt which I don't understand. I don't know enough about sqlite3 to know what that means? Best Regards, Jerry _____ From: Anthony Minessale [mailto:anthony.minessale@gmail.com] Sent: Friday, October 02, 2009 10:52 AM To: freeswitch-users(a)lists.freeswitch.org Subject: Re: [Freeswitch-users] FS Does Not Relay PresencePUBLISHToSubscribing Phones connect to sqlite directly with sqlite3 app and try that sql stmt and see why it doesn't match anything. sqlite3 /usr/local/freeswitch/db/sofia_reg_internal.db select sip_subscriptions.proto,sip_subscriptions.sip_user,sip_subscriptions.sip_hos t,sip_subscriptions.sub_to_user,sip_subscriptions.sub_to_host,sip_subscripti ons.event,sip_subscriptions.contact,sip_subscriptions.call_id,sip_subscripti ons.full_from,sip_subscriptions.full_via,sip_subscriptions.expires,sip_subsc riptions.user_agent,sip_subscriptions.accept,sip_subscriptions.profile_name, 'Away','away','192.168.72.38',sip_presence.status,sip_presence.rpid from sip_subscriptions left join sip_presence on (sip_subscriptions.sub_to_user=sip_presence.sip_user and sip_subscriptions.sub_to_host=sip_presence.sip_host and sip_subscriptions.profile_name=sip_presence.profile_name) where (event='presence' or event='presence') and sub_to_user='1001' and (sub_to_host='192.168.72.38' or presence_hosts like '%192.168.72.38%') and (sip_subscriptions.profile_name = 'external' or sip_subscriptions.presence_hosts != sip_subscriptions.sub_to_host) On Fri, Oct 2, 2009 at 12:12 PM, Jerry Richards <jerry.richards(a)teotech.com> wrote: Okay, I put a log up on the pastebin that shows the PUBLISH event coming from a CounterPath Bria Professional phone. For some reason, FS is getting an error and not relaying the presence status to the subscriber. Best Regards, Jerry _____ From: João Mesquita [mailto:jmesquita@freeswitch.org] Sent: Thursday, October 01, 2009 8:14 PM To: freeswitch-users(a)lists.freeswitch.org Subject: Re: [Freeswitch-users] FS Does Not Relay Presence PUBLISHToSubscribing Phones Piece of advice, don't ask, just do it. ;) jmesquita On Thu, Oct 1, 2009 at 3:29 PM, Jerry Richards <jerry.richards(a)teotech.com> wrote: If you have time to take a look, I could put a trace in the pastebin? Jerry _____ From: Jerry Richards [mailto:jerry.richards@teotech.com] Sent: Thursday, October 01, 2009 10:29 AM To: 'freeswitch-users(a)lists.freeswitch.org' Subject: RE: [Freeswitch-users] FS Does Not Relay Presence PUBLISH ToSubscribing Phones I am using two Bria Professional Version 2.5.4 Build 54835 softphones. Thanks, Jerry _____ From: Anthony Minessale [mailto:anthony.minessale@gmail.com] Sent: Thursday, October 01, 2009 9:36 AM To: freeswitch-users(a)lists.freeswitch.org Subject: Re: [Freeswitch-users] FS Does Not Relay Presence PUBLISH ToSubscribing Phones which phone is it, we tested it with eyebeam and it appears to work for us. On Thu, Oct 1, 2009 at 9:57 AM, Jerry Richards <jerry.richards(a)teotech.com> wrote: By the way, I see the following lines at the FS console, which might be a clue as to why this is happening. Could someone point me toward what might cause this? I set the "manage-presence" parameter to "true" in each XML file where I saw it defined. [INFO] sofia_presence.c:603 IN START_PRESENCE_SQL (internal) [ERR] sofia_presence.c:611 DUMP PRESENCE SQL ... [INFO] sofia_presence.c:603 IN START_PRESENCE_SQL (internal-ipv6) [ERR] sofia_presence.c:611 DUMP PRESENCE SQL ... [INFO] sofia_presence.c:603 IN START_PRESENCE_SQL (external) [ERR] sofia_presence.c:611 DUMP PRESENCE SQL ... [WARNING] sofia_presence.c:565 192.168.72.38 is an alias, skipping Best Regards, Jerry -----Original Message----- From: Jerry Richards [mailto:jerry.richards@teotech.com] Sent: Wednesday, September 30, 2009 9:12 AM To: 'freeswitch-users(a)lists.freeswitch.org' Subject: FS Does Not Relay Presence PUBLISH To Subscribing Phones I have two phones configured to subscribe to each other's presence status. When I change the presence status in one phone, I see the SIP PUBLISH message going to FS, but I don't see FS relaying that presence status to the subscribing phone. Does anyone know why? Best Regards, Jerry _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400 _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400

2 1

FreeSWITCH Weekly Conference Call Starting, Please Join Us!
by Michael Collins 09 Oct '09

09 Oct '09

Agenda and call-in info: http://bit.ly/lzEYy

1 0

NAT problems - sorry
by Andy 09 Oct '09

09 Oct '09

Hi folks, I know this problem comes up all the time so sorry to bring it up again but I can't seem to find the answer in previous posts. I have my freeswitch installation behind a DLink firewall so the freeswitch server is natted. I have added what I believe are all the necessary rules to the firewall to handle SIP correctly and the firewall isn't showing any blocked traffic when calls come in. Calls are forwarded to my public ip address from my VOIP provider Voiptalk. Here's the problem: Incoming calls are successfully forwarded to the freeswitch server and answered. I can hear the IVR message played down the phone line so outgoing audio is ok. When I try to send DTMF key presses from my phone none of these register on the switch. When I hangup the call the call hangup is also not picked up by the switch. I have followed the auto-nat instrcutions and have verified that the switch correctly grabs and sets the external ip address. I have also tried setting the external ip address manually but without success. Can anyone offer any guidance as to what might be causing this problem or what I could try to resolve it? I can post log/config snippets if that helps. Many thanks Andy

3 8

[ERR] mod_dingaling.c:980 Stun Failed!
by Mark Campbell-Smith 09 Oct '09

09 Oct '09

Hi! I have just started to use dingaling again, and noticed I constantly get a stun error. 2009-09-29 21:11:03.175002 [ERR] mod_dingaling.c:980 Stun Failed! stun.fwdnet.net:3478 [Remote Address Error!] I have tried with stun.freeswitch.org and stun.fwdnet.net stun servers and keep getting this error with dingaling. I have no problems with inbound sip calls, so I don't think its the actual stun server. Has anyone else seen this? I am using: FreeSWITCH Version 1.0.trunk (14952) Thanks!

2 3

mod_fax compile fails
by Mark Campbell-Smith 09 Oct '09

09 Oct '09

HI all, I just tried to update to the latest svn and I get these errors right at the end after issuing a 'make current'. I am using Debian Lenny. making all mod_fax make[5]: Entering directory `/home/mark/freeswitch/src/mod/applications/mod_fax' make[6]: Entering directory `/home/mark/freeswitch/src/mod/applications/mod_fax' make[7]: Entering directory `/home/mark/freeswitch/libs/tiff-3.8.2' running /bin/sh ./configure --prefix=/usr/local/freeswitch --cache-file=/dev/null --srcdir=. --disable-shared --with-pic --no-create --no-recursion configure: error: cannot run /bin/sh config/config.sub make[7]: *** [config.status] Error 1 make[7]: Leaving directory `/home/mark/freeswitch/libs/tiff-3.8.2' make[6]: *** [../../../../libs/tiff-3.8.2/libtiff/libtiff.la] Error 2 make[6]: Leaving directory `/home/mark/freeswitch/src/mod/applications/mod_fax' make[5]: *** [all] Error 1 make[5]: Leaving directory `/home/mark/freeswitch/src/mod/applications/mod_fax' make[4]: *** [mod_fax-all] Error 1 make[4]: Leaving directory `/home/mark/freeswitch/src/mod' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/mark/freeswitch/src' Making all in build make[3]: Entering directory `/home/mark/freeswitch/build' +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[3]: Leaving directory `/home/mark/freeswitch/build' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/mark/freeswitch' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/mark/freeswitch' make: *** [current] Error 2 Also, are the 'Leaving directory / all-recursive' errors going to cause a problem? Thanks! Any ideas what the cause is?

4 5