October 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Bridge application with shared lines
by Yehavi Bourvine 07 Oct '09

07 Oct '09

Hello, We have Polycom and SNOM phones running with FreeSwitch. The Polycoms have shared lines defined and the SNOMs have both shared lines and BLFs (defined as extensions in the phone config). I've tried supporting both, but have some incompatibility: - When calling the Bridge application with data parameter of *sofia*/* profile-name/number@domain* the BLF works ok, but not the shared lines (i.e only one of the phones rings). - When calling the Bridge application with data parameter of * ${sofia_contact(*/*profile-name/number@domain*)} shared lines work ok but BLF doesn't fire up. How do I support both? Is there a way to know whether the destination is a shared one and then chose one of the above formats? Thanks! __Yehavi:

3 2

FreeSWITCH Weekly Conference Call Followup, Agenda For This Week
by Michael Collins 07 Oct '09

07 Oct '09

Ladies and Gentlemen, Thank you for calling in to the weekly FreeSWITCH conference call. Last week's agenda was rather light, so if you have things that you would like to have discussed please be sure to add them here: http://wiki.freeswitch.org/wiki/FS_weekly_2009_10_09 Here are a few updates for everyone to keep in mind: * Starting with the upcoming meeting (Oct 9) the conference will support 48kHz CELT codec. * When you call in, please mute your phone if you are just listening or if you will not be speaking a lot. Background noise from one user isn't usually too bad, but when 10 or 15 people are not muted it can get a little distracting. :) * We are always looking for people to help out. If you are looking for ways to help out then please by all means call the conference. If you cannot call the conference for some reason but still want to help out, please email me off list. We have numerous documentation, janitorial, code review, etc. sub-projects that FreeSWITCH users can help with. * Be sure to update to latest SVN trunk and test test test! We are prepping for 1.0.5 and more people testing means a more stable release delivered more quickly. One topic that came up was the testing of Mike van Lammerman's Ultramonkey setup. (http://bit.ly/8zZUS) Several people agreed to try it out. We would love to see others try it out and report back their experiences. Lastly, we'd like to thank everyone who has been helping out with testing, documentation, and answering questions on the email list and IRC channels. A special thanks to Diego Viola for doing lots of wiki cleanup lately. Everyone's efforts are appreciated. -Michael

4 5

Re: [Freeswitch-users] Configuring Nibble Bill
by Ahmed Munir 07 Oct '09

07 Oct '09

Hi, Thanks for replying. The advise u gave resolved my problem. I want to ask three questions related to nibble bills, as I 'm listing down below; 1- Can we select/use dynamic tables for billing using nibble bill? 2- Can we define more than two tables and attributes in nibblebill.conf.xml? 3- As Nibble bill is use to deduct amount of user account, Can we deduct minutes instead of cash? Because my case is, if a user buy a package and I only want to deducts his/her minutes. How we can resolve it by nibble bill? / What other way we can resolve it? Kindly advise soon. > > ---------- Forwarded message ---------- > From: Todd Baumgartner <todd.baumgartner(a)gmail.com> > To: freeswitch-users(a)lists.freeswitch.org > Date: Tue, 6 Oct 2009 10:31:06 -0400 > Subject: Re: [Freeswitch-users] Cannot connect to ODBC driver/database > freeswitchdb > Ahmed, > > I believe you need to specify the database name as it is configured in the > odbc.ini > > I am assuming you have something like this in your nibblebill.conf.xml > > <param name="db_dsn" value="freeswitchdb"/> > > Try changing it to this as it is named in the odbc.ini: > > <param name="db_dsn" value="MySQL-freeswitch"/> > > > Thanks, > > Todd > > > > On Tue, Oct 6, 2009 at 6:11 AM, Ahmed Munir <ahmedmunir007(a)gmail.com>wrote: > >> Hi, >> I've installed FS on Ubuntu 9.04 and I want to run mod_nibbles on it. I >> follow the steps to configure my ODBC connection with MySQL as explained in >> wiki (mod_nibbles and mod_spidermonkey). But FS, unable to connect it. The >> error I got is listed below when I restart FS, >> >> 2009-10-06 15:47:21.164590 [ERR] switch_odbc.c:188 STATE: IM002 CODE 0 >> ERROR: [unixODBC][Driver Manager]Data source name not found, and no default >> driver specified >> 2009-10-06 15:47:21.164617 [CRIT] mod_nibblebill.c:221 Cannot connect to >> ODBC driver/database freeswitchdb (user: root / pass password) >> 2009-10-06 15:47:21.164650 [CONSOLE] switch_loadable_module.c:889 >> Successfully Loaded [mod_nibblebill] >> 2009-10-06 15:47:21.164664 [NOTICE] switch_loadable_module.c:248 Adding >> Application 'nibblebill' >> 2009-10-06 15:47:21.164710 [NOTICE] switch_loadable_module.c:270 Adding >> API Function 'nibblebill' >> >> But when I use isql it accepts my odbc connection i.e. isql >> MySQL-freeswitch >> >> I'm listing my settings of odbc.ini and odbcinst.ini as listed below; >> >> odbc.ini >> -------------- >> [MySQL-freeswitch] >> Driver = MySQL >> #Driver = /usr/lib/odbc/libodbcmyS.so >> Description = Connector/ODBC Driver DSN With FreeSwitch >> SERVER = localhost >> PORT = 3306 >> USER = root >> Password = password >> Database = freeswitchdb >> >> odbcinst.ini >> ------------------- >> [MySQL] >> Description = ODBC for MySQL >> Driver = /usr/lib/odbc/libmyodbc.so >> Setup = /usr/lib/odbc/libodbcmyS.so >> FileUsage = 1 >> >> >> odbc.ini and odbcinst.ini are located at /etc/. Even I set my odbc >> connection setting as I provide with this link; >> http://dev.mysql.com/doc/refman/5.0/en/connector-odbc-configuration-dsn-uni… >> >> But unfortunately my problem is unresolved then. >> >> >> Kindly advise me, how can I resolve this problem? >> >> -- >> Regards, >> >> Ahmed Munir >> >> >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > -- Regards, Ahmed Munir

1 0

oz debug says error
by lakshmanan ganapathy 07 Oct '09

07 Oct '09

Hi all, I've compiled the freeswitch with libpri support. But when I execute oz libpri debug 1 all, I got the following error. API CALL [oz(libpri debug 1 all )] output: src/ozmod/ozmod_libpri/ozmod_libpri.c: -ERR invalid span. Here is my openzap configurations. openzap.conf [span zt PRI_1] trunk_type => e1 b-channel => 1:1-15 d-channel=> 1:16 b-channel => 1:17-31 openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <pri_spans> <span id="1" name="PRI_1"> <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="alert"/> <param name="mode" value="user"/> <param name="dialect" value="q931"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration> I feel something I've missed in configurations. Please tell me how to get rid of that error.

5 7

how to Conference with picup?
by Filip Lyncker 07 Oct '09

07 Oct '09

Hi List, maybe someone can give me some hints to get faster into this stuff. Here the use case: I am Ext A and talking to Ext B. Now Ext C is calling to another number : D. How can I 1. Pic up the calling Ext C ? 2. Include it to my current call to Ext A ? I would need some infos wich elements in my dialplan i have to use and how to configure them ... maybe you guys know some documentation else about this issue ... thanks a lot regards, Filip -- _________________________________ Filip Lyncker, Dipl.-Inform. (FH) Lyncker & Theis GmbH Wilhelmstr. 16 65185 Wiesbaden Germany Fon +49 611/9006951 Fax +49 611/9406125 Handelsregister: HRB 23156 Amtsgericht Wiesbaden Steuernummer: 4023897051 USt-IdNr.: DE255806399 Geschäftsführer: Filip Lyncker, Armin Theis

1 0

Mobile Phone As GSM Gateway....
by Moiz Chinoy 07 Oct '09

07 Oct '09

Hi, Is it possible to connect a mobile phone (GSM phone) to Freeswitch and use this as a GSM gateway? -- Regards, Moiz Chinoy.

4 4

mod_xml_curl
by srinivasula reddy 07 Oct '09

07 Oct '09

Hi, i want use mod_xml_curl, the xml files also there in my local system, i dont want to take from any other system, can any please tell me how to configure mox_xml.conf.xml, how can i use <bindings> to local folders Thanks Srinivasula Reddy K

3 3

mod_xml_curl
by srinivasula reddy 07 Oct '09

07 Oct '09

Hi, i want use mod_xml_curl, the xml files also there in my local system, i dont want to take from any other system, can any please tell me how to configure mox_xml.conf.xml, how can i use <bindings> to local folders Thanks Srinivasula Reddy K

1 0

mod_xml_curl http POST is inconsistent/bug
by Christian Damianidis 07 Oct '09

07 Oct '09

Trying to achieve dynamic binding of user directory. In short: It's not doing the authorization properly. I can use curl in the command line and it works perfectly, specifying BASIC auth.. however with the freeswitch module it returns HTTP 401. So I've taken a close look at the network packets being sent and there are some issues. This is between the <bindings></bindings> tags in my xml_curl.conf.xml (1.2.3.4 represents my webserver's IP) <binding name="users"> <param name="gateway-url" value="http://1.2.3.4:2000/users.aspx" bindings="directory"/> <param name="gateway-credentials" value="username:password"/> </binding> When I run "curl -basic -u username http://1.2.3.4:2000/users.aspx" it asks me for a password and returns the correct thing. I use tshark to monitor, and it sends a GET request, with the correct authorization credentials in the header. I receive an HTTP 200 OK packet and the xml follows. When I startup freeswitch, I guess the xml curl module gets to run, and it makes the request. However this time it's a POST, and oddly DOES NOT include the Authorization: Basic <encodedstring> line in the packet. I get back two HTTP 401 Unauthorized responses, and then freeswitch sends out another POST, this time includes the authorization line, and I get back an OK with the xml. My user directory is updated and we're all good. The inconsistent POST request sent by the module causes freeswitch to hang for 1-2 minutes during start-up. Has anyone else had this issue? Is this a bug or intended functionality (ping the server before making a real request?). I'd love to sort this out, otherwise getting an updated directory isn't real-time, thus defeating the purpose. Thanks, Christian

4 5

Wiki Info: Multi Homed Tutorial
by Michael Collins 07 Oct '09

07 Oct '09

FYI, For those who've been following the thread about Michael Gende's tutorial I just wanted to let you know that I his document on the wiki. It can be found here: http://wiki.freeswitch.org/wiki/Multi_home_tutorial Please feel free to get in there and try it out, make editorial changes, etc. I'm sure you won't hurt Mike's feelings by adding your thoughts. :) If you have any questions please reply to this thread and we'll take it from there. Thanks, MC

3 5