November 2007 - FreeSWITCH-users - FreeSWITCH Mailing Lists

load average
by Freeswitch Freeswitch 24 Nov '07

24 Nov '07

Does anyone know of kernel tweaks that can be done to optimize running FS on linux? I just completed a test running 800 calls ( 1600 streams ) on a Dell 1950 with dual 2.33GHz and 2 gig of ram. Call scenario was FS running as SIP B2BUA for purposes of topology hiding and dtmf 2833 interworking. Calls were a mix of 711 and 729 Everything worked perfect Load average on the box rose over 50 ( processes in the queue ) at one point. CPU was running between 150% and 180% ( keep in mind there are 2 dual core CPUs so 4 total ) Bandwidth usage was about 80 M Should I worry about that load average number? Seems high but test calls sounded fine. Thanks and best regards, Tom

2 1

Re: [Freeswitch-users] Using a dial-up modem to connect ordinary phones
by Anthony Minessale 24 Nov '07

24 Nov '07

yes mod_openzap supports zaptel compatible hardware as well as pika and sangoma analog and digital boards. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: David Villasmil Govea <david.villasmil(a)gmail.com> To: freeswitch-users(a)lists.freeswitch.org Sent: Saturday, November 24, 2007 11:38:35 AM Subject: Re: [Freeswitch-users] Using a dial-up modem to connect ordinary phones Hello, I don´t think you can. But what exactly do you want to do? Dial in and have FS forward the call via a voip service? I don´t know if FS supports an X100. IMO your best bet is buying an X100 clone card, which go for about 15$ on ebay and use asterisk instead of FS. hope this helps On 11/24/07, Ziya Suzen <ziya(a)suzen.net> wrote: > Hi there > > I am quite new to FreeSWITCH and VoIP. I have been searching the net > and the users-list archive, but can't seem to be able to find an > answer to this question: Can I use an old fashion dialup modem to > connect an ordinary phone and hook to VoIP? > > Any pointers, references appreciated. > > Thanks in advance. > > -z > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > -- DVG -- Imagination is more important than knowledge Albert Einstein _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ____________________________________________________________________________________ Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. http://overview.mail.yahoo.com/

2 1

Re: [Freeswitch-users] Using a dial-up modem to connect ordinary phones
by Anthony Minessale 24 Nov '07

24 Nov '07

Some modems are able to do voice but you can buy inexpensive hardware made specifically for connecting phones and phone lines to voip from a place like PBXEQ http://www.pbxeq.com Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Ziya Suzen <ziya(a)suzen.net> To: freeswitch-users(a)lists.freeswitch.org Sent: Saturday, November 24, 2007 11:08:45 AM Subject: [Freeswitch-users] Using a dial-up modem to connect ordinary phones Hi there I am quite new to FreeSWITCH and VoIP. I have been searching the net and the users-list archive, but can't seem to be able to find an answer to this question: Can I use an old fashion dialup modem to connect an ordinary phone and hook to VoIP? Any pointers, references appreciated. Thanks in advance. -z _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ____________________________________________________________________________________ Get easy, one-click access to your favorites. Make Yahoo! your homepage. http://www.yahoo.com/r/hs

1 0

Re: [Freeswitch-users] mem leak and core dump
by Anthony Minessale 24 Nov '07

24 Nov '07

If the problem persists can you open a bug on jira. http://jira.freeswitch.org That way we can track it better and you can attach traces etc. That crash appears to come from the sofia sip library. there have been a few updates to that library that may not be applied to your tree can you try the following commands from your unix shell in the main root of the freeswitch src? svn update cd libs/sofia-sip make clean make cd ../.. make clean modwipe make install what does your dialplan look like that you are testing calls to? Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Freeswitch Freeswitch <freeswitch(a)2ride.com> To: freeswitch-users(a)lists.freeswitch.org Sent: Saturday, November 24, 2007 10:48:28 AM Subject: Re: [Freeswitch-users] mem leak and core dump Here are my ulimit settings before I adjusted to meet your recommendations Anthony. I had increased file descriptors and decreased stack size. t: cpu time (seconds) unlimited -f: file size (blocks) unlimited -d: data seg size (kbytes) unlimited -s: stack size (kbytes) 1024 -c: core file size (blocks) 0 -m: resident set size (kbytes) unlimited -u: processes 16381 -n: file descriptors 100000 -l: locked-in-memory size (kb) 32 -v: address space (kb) unlimited -x: file locks unlimited -i: pending signals 16381 -q: bytes in POSIX msg queues 819200 -N 13: 0 -N 14: 0 Here are the settings I am running with now. -t: cpu time (seconds) unlimited -f: file size (blocks) unlimited -d: data seg size (kbytes) unlimited -s: stack size (kbytes) unlimited -c: core file size (blocks) unlimited -m: resident set size (kbytes) unlimited -u: processes 16381 -n: file descriptors 999999 -l: locked-in-memory size (kb) 32 -v: address space (kb) unlimited -x: file locks unlimited -i: pending signals 16381 -q: bytes in POSIX msg queues 819200 -N 13: 0 -N 14: 0 Here is the stack from my lastest crash. I noticed some of the libraries did not seem to be built with debug so I cleaned and rebuilt and reinstall everything. Currently running for 15 minutes, over 5000 total sessions and 300 concurrent. Finger crossed ....... GNU gdb Red Hat Linux (6.6-8.fc7rh) Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu"... Using host libthread_db library "/lib64/libthread_db.so.1". Reading symbols from /lib64/libm.so.6...done. Loaded symbols for /lib64/libm.so.6 Reading symbols from /usr/local/freeswitch1121/lib/libfreeswitch.so.1...done. Loaded symbols for /usr/local/freeswitch1121/lib/libfreeswitch.so.1 Reading symbols from /usr/lib64/libsqlite3.so.0...done. Loaded symbols for /usr/lib64/libsqlite3.so.0 Reading symbols from /lib64/libuuid.so.1...done. Loaded symbols for /lib64/libuuid.so.1 Reading symbols from /lib64/librt.so.1...done. Loaded symbols for /lib64/librt.so.1 Reading symbols from /lib64/libdl.so.2...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libcrypt.so.1...done. Loaded symbols for /lib64/libcrypt.so.1 Reading symbols from /lib64/libpthread.so.0...done. Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libc.so.6...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /usr/lib64/libstdc++.so.6...done. Loaded symbols for /usr/lib64/libstdc++.so.6 Reading symbols from /lib64/libgcc_s.so.1...done. Loaded symbols for /lib64/libgcc_s.so.1 Reading symbols from /lib64/ld-linux-x86-64.so.2...done. Loaded symbols for /lib64/ld- linux-x86-64.so.2 Reading symbols from /usr/local/freeswitch1121/mod/mod_console.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_console.so Reading symbols from /usr/local/freeswitch1121/mod/mod_syslog.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_syslog.so Reading symbols from /usr/local/freeswitch1121/mod/mod_xml_rpc.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_xml_rpc.so Reading symbols from /usr/local/freeswitch1121/mod/mod_sofia.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_sofia.so Reading symbols from /lib64/libssl.so.6...done. Loaded symbols for /lib64/libssl.so.6 Reading symbols from /lib64/libcrypto.so.6...done. Loaded symbols for /lib64/libcrypto.so.6 Reading symbols from /lib64/libz.so.1...done. Loaded symbols for /lib64/libz.so.1 Reading symbols from /usr/lib64/libgssapi_krb5.so.2...done. Loaded symbols for /usr/lib64/libgssapi_krb5.so.2 Reading symbols from /usr/lib64/libkrb5.so.3...done. Loaded symbols for /usr/lib64/libkrb5.so.3 Reading symbols from /lib64/libcom_err.so.2...done. Loaded symbols for /lib64/libcom_err.so.2 Reading symbols from /usr/lib64/libk5crypto.so.3...done. Loaded symbols for /usr/lib64/libk5crypto.so.3 Reading symbols from /usr/lib64/libkrb5support.so.0...done. Loaded symbols for /usr/lib64/libkrb5support.so.0 Reading symbols from /lib64/libkeyutils.so.1...done. Loaded symbols for /lib64/libkeyutils.so.1 Reading symbols from /lib64/libresolv.so.2...done. Loaded symbols for /lib64/libresolv.so.2 Reading symbols from /usr/local/freeswitch1121/mod/mod_commands.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_commands.so Reading symbols from /usr/local/freeswitch1121/mod/mod_conference.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_conference.so Reading symbols from /usr/local/freeswitch1121/mod/mod_dptools.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_dptools.so Reading symbols from /usr/local/freeswitch1121/mod/mod_expr.so...Error while reading shared library symbols: DW_FORM_strp pointing outside of .debug_str section [in module /usr/local/freeswitch1121/mod/mod_expr.so] Reading symbols from /usr/local/freeswitch1121/mod/mod_fifo.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_fifo.so Reading symbols from /usr/local/freeswitch1121/mod/mod_voicemail.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_voicemail.so Reading symbols from /usr/local/freeswitch1121/mod/mod_limit.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_limit.so Reading symbols from /usr/local/freeswitch1121/mod/mod_dialplan_xml.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_dialplan_xml.so Reading symbols from /usr/local/freeswitch1121/mod/mod_g711.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_g711.so Reading symbols from /usr/local/freeswitch1121/mod/mod_g729.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_g729.so Reading symbols from /usr/local/freeswitch1121/mod/mod_l16.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_l16.so Reading symbols from /usr/local/freeswitch1121/mod/mod_say_en.so...done. Loaded symbols for /usr/local/freeswitch1121/mod/mod_say_en.so Reading symbols from /usr/local/freeswitch1121/mod/mod_expr.so...Error while reading shared library symbols: DW_FORM_strp pointing outside of .debug_str section [in module /usr/local/freeswitch1121/mod/mod_expr.so] Core was generated by `./freeswitch'. Program terminated with signal 11, Segmentation fault. #0 nua_stack_timer (nua=<value optimized out>, t=<value optimized out>, a=0x0) at nua_stack.c:513 513 if (du->du_refresh && du->du_refresh < next) (gdb) where #0 nua_stack_timer (nua=<value optimized out>, t=<value optimized out>, a=0x0) at nua_stack.c:513 #1 0x00002aaaabdb1ae8 in su_timer_expire (timers=<value optimized out>, timeout=0x402b40d8, now={tv_sec = 3404833764, tv_usec = 661017}) at su_timer.c:533 #2 0x00002aaaabdb71a6 in su_base_port_run (self=0x6901f0) at su_base_port.c:328 #3 0x00002aaaabda7e7b in su_pthread_port_clone_main (varg=<value optimized out>) at su_pthread_port.c:321 #4 0x00002aaaaae051c5 in start_thread () from /lib64/libpthread.so.0 #5 0x0000003baaed062d in clone () from /lib64/libc.so.6 (gdb) After this crash I did a clean rebuild and reinstall - since then I have had no subsequent crashes. On 11/23/07, Anthony Minessale <anthmct(a)yahoo.com> wrote: please disable the crash-protection option in switch.conf.xml and execute the command 'ulimit -c unlimited' from your unix shell before you start freeswitch.. here are some other ulimits you may want to turn up for high-volume calls: vi u also you can use the unix command "script" to log all the console output to a file so you can capture all of the output for us to examine. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Freeswitch Freeswitch <freeswitch(a)2ride.com> To: freeswitch-users(a)lists.freeswitch.org Sent: Friday, November 23, 2007 10:47:53 AM Subject: Re: [Freeswitch-users] mem leak and core dump Caught signal 11 for unmapped thread! On 11/23/07, Freeswitch Freeswitch < freeswitch(a)2ride.com> wrote: Hello, Now I have updated to the latest trunk as of Nov 21 and moved to a fedora 7 system. Still chasing random crashes of FS. First time this happened last night there were around 1000 sessions up. Crit error was logged referring to a signal caught on an unmapped thread. I wasn't able to catch the specific signal in the console before it scrolled off. This morning I had another crash. This time around 200 sessions running. There was no logging reported during the second crash. Calling scenario is about as simple as it gets. gw1 -> freeswitch -> gw2 all sip codecs, 729 and 711 transcoding off I have been playing with the various rtp knobs in the sofia conf. Sometimes running with rewriting rtp timerstamps, sometimes not. Also tried with soft timer and off. ( can someone point me to an explanation of what the soft timer does? ). Also notable that I compiled the code with debug symbols. No core has been generated during crashes. Is there some way to enable core dumps? Overall I am very impressed with FS - would love to get the cause of these crashes nailed so I can press forward. Any help is very much appreciated. Best regards, Tom On 11/19/07, Michael Jerris < mike(a)jerris.com> wrote: On 11/19/07, Freeswitch Freeswitch <freeswitch(a)2ride.com> wrote: Hello Freeswitch'rs, I recently began using the latest freeswitch beta code as a pure B2BUA for the purpose of topology hiding of IP - PSTN calls. running env: Linux b2bua 2.6.18 #6 SMP Thu Nov 16 10:35:45 EST 2006 i686 Intel(R) Xeon(R) CPU 5140 @ 2.33GHz GNU/Linux Freeswitch version: FreeSwitch Version 1.0.pre1 (6220M) The modules I am using are 711 and 729 codecs, sip, directory, xml_rpc, cdr, xml_cdr, console and syslog. I am seeing what appears to be a memory leak. Consumed memory continues to drop linearly based on number of calls. Also had one core dump. Can you provide details of the call scenarios you are testing, call rates, number of concurrent calls and any other details? What can I do to help troubleshoot these issues? Today I plan to stop using the CDR, rpc and logging modules to see if it makes a difference. We have tested quite heavily with mod_console running, that should not be an issue. Also considering running on one of my fedora core 7 boxes instead of gentoo, again to see if anything changes. We have had repeated issues with gentoo due to patches made either to gcc or to libc or the kernel. It is the only os/distro that I highly suggest never using. Mike _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org Get easy, one-click access to your favorites. Make Yahoo! your homepage. _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ____________________________________________________________________________________ Get easy, one-click access to your favorites. Make Yahoo! your homepage. http://www.yahoo.com/r/hs

1 0

Using a dial-up modem to connect ordinary phones
by Ziya Suzen 24 Nov '07

24 Nov '07

Hi there I am quite new to FreeSWITCH and VoIP. I have been searching the net and the users-list archive, but can't seem to be able to find an answer to this question: Can I use an old fashion dialup modem to connect an ordinary phone and hook to VoIP? Any pointers, references appreciated. Thanks in advance. -z

2 1

mem leak and core dump
by Freeswitch Freeswitch 24 Nov '07

24 Nov '07

Hello Freeswitch'rs, I recently began using the latest freeswitch beta code as a pure B2BUA for the purpose of topology hiding of IP - PSTN calls. running env: Linux b2bua 2.6.18 #6 SMP Thu Nov 16 10:35:45 EST 2006 i686 Intel(R) Xeon(R) CPU 5140 @ 2.33GHz GNU/Linux Freeswitch version: FreeSwitch Version 1.0.pre1 (6220M) The modules I am using are 711 and 729 codecs, sip, directory, xml_rpc, cdr, xml_cdr, console and syslog. I am seeing what appears to be a memory leak. Consumed memory continues to drop linearly based on number of calls. Also had one core dump. What can I do to help troubleshoot these issues? Today I plan to stop using the CDR, rpc and logging modules to see if it makes a difference. Also considering running on one of my fedora core 7 boxes instead of gentoo, again to see if anything changes. Ideas appreciated. Regards, Tom

4 6

, [Freeswitch-dev] mod_java link problem in build
by jonathan augenstine 22 Nov '07

22 Nov '07

I just attempted the build of mod_java. The previous problem is resolved but some new issues have cropped up. There is a link problem now with unresolved symbols. Below is a trace of the build. Jonathan making all mod_java Compiling freeswitch_java.cpp... Compiling switch_swig_wrap.cpp... Compiling mod_java.c... Creating mod_java.so... Undefined symbols: "operator delete(void*)", referenced from: JavaSession::~JavaSession()in freeswitch_java.o JavaSession::~JavaSession()in freeswitch_java.o _Java_org_freeswitch_swig_freeswitchJNI_delete_1input_1callback_1state_1t in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_10 in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_12 in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_11 in switch_swig_wrap.o "___gxx_personality_v0", referenced from: ___gxx_personality_v0$non_lazy_ptr in freeswitch_java.o ___gxx_personality_v0$non_lazy_ptr in switch_swig_wrap.o "operator new[](unsigned long)", referenced from: _Java_org_freeswitch_swig_freeswitchJNI_input_1callback_1state_1t_1funcargs_1set in switch_swig_wrap.o "operator delete[](void*)", referenced from: _Java_org_freeswitch_swig_freeswitchJNI_input_1callback_1state_1t_1funcargs_1set in switch_swig_wrap.o "operator new(unsigned long)", referenced from: _Java_org_freeswitch_swig_freeswitchJNI_new_1input_1callback_1state_1t in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_CoreSession_1hook_1state_1get in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_CoreSession_1run_1dtmf_1callback in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_hanguphook in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_dtmf_1callback in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_10 in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_12 in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_JavaSession_1run_1dtmf_1callback in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_process_1callback_1result in switch_swig_wrap.o _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_11 in switch_swig_wrap.o "vtable for __cxxabiv1::__si_class_type_info", referenced from: typeinfo for JavaSessionin freeswitch_java.o ld: symbol(s) not found collect2: ld returned 1 exit status gcc -I/System/Library/Frameworks/JavaVM.framework/Versions/Current/Headers -DHasJava -fno-strict-aliasing -I/Users/jaugenstine/freeswitch/freeswitch/src/include -I/Users/jaugenstine/freeswitch/freeswitch/libs/libteletone/src -Werror -DMACOSX -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -o .libs/mod_java.so -dynamic -bundle -force-flat-namespace mod_java.o -o .libs/mod_java.so freeswitch_java.o switch_swig_wrap.o -L/usr/local/lib /Users/jaugenstine/freeswitch/freeswitch/.libs/libfreeswitch.1.0.0.dylib -lm -lsqlite3 /usr/lib/libiconv.dylib /Users/jaugenstine/freeswitch/freeswitch/libs/apr/.libs/libapr- 1.a -ldl -lpthread make[5]: *** [mod_java.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_java-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2

2 2

Re: [Freeswitch-users] [Freeswitch-dev] mod_java link problem in build
by Michael Jerris 22 Nov '07

22 Nov '07

A bit of a dirty build hack, but this should build on OS X now in trunk. Mike On 11/22/07, Damjan Jovanovic <damjan(a)ecntelecoms.com> wrote: > > X-ECN Telecoms-MailScanner-Information: Contact ECN Telecoms > X-ECN Telecoms-MailScanner: Found to be clean > X-ECN Telecoms-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, > score=-96.982, required 6, AWL -0.61, FH_HOST_ALMOST_IP 1.75, > RCVD_IN_PBL 0.91, RCVD_IN_SORBS_DUL 0.88, RDNS_DYNAMIC 0.10, > USER_IN_WHITELIST -100.00) > X-ECN Telecoms-MailScanner-From: damjan(a)ecntelecoms.com > X-Spam-Status: No > > On Wed, 2007-11-21 at 22:55 -0800, jonathan augenstine wrote: > > I just attempted the build of mod_java. The previous problem is > > resolved but some new issues have cropped up. There is a link problem > > now with unresolved symbols. Below is a trace of the build. > > > > Jonathan > > > > > > making all mod_java > > Compiling freeswitch_java.cpp... > > Compiling switch_swig_wrap.cpp... > > Compiling mod_java.c... > > > > Creating mod_java.so... > > Undefined symbols: > > "operator delete(void*)", referenced from: > > JavaSession::~JavaSession()in freeswitch_java.o > > JavaSession::~JavaSession()in freeswitch_java.o > > _Java_org_freeswitch_swig > > _freeswitchJNI_delete_1input_1callback_1state_1t in switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_10 in > > switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_12 in > > switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_11 in > > switch_swig_wrap.o > > "___gxx_personality_v0", referenced from: > > ___gxx_personality_v0$non_lazy_ptr in freeswitch_java.o > > ___gxx_personality_v0$non_lazy_ptr in switch_swig_wrap.o > > "operator new[](unsigned long)", referenced from: > > > > > _Java_org_freeswitch_swig_freeswitchJNI_input_1callback_1state_1t_1funcargs_1set > in switch_swig_wrap.o > > "operator delete[](void*)", referenced from: > > > > > _Java_org_freeswitch_swig_freeswitchJNI_input_1callback_1state_1t_1funcargs_1set > in switch_swig_wrap.o > > "operator new(unsigned long)", referenced from: > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1input_1callback_1state_1t > > in switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_CoreSession_1hook_1state_1get > > in switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_CoreSession_1run_1dtmf_1callback > in switch_swig_wrap.o > > _Java_org_freeswitch_swig_freeswitchJNI_hanguphook in > > switch_swig_wrap.o > > _Java_org_freeswitch_swig_freeswitchJNI_dtmf_1callback in > > switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_10 in > > switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_12 in > > switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_JavaSession_1run_1dtmf_1callback > in switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_process_1callback_1result in > > switch_swig_wrap.o > > > > _Java_org_freeswitch_swig_freeswitchJNI_new_1JavaSession_1_1SWIG_11 in > > switch_swig_wrap.o > > "vtable for __cxxabiv1::__si_class_type_info", referenced from: > > typeinfo for JavaSessionin freeswitch_java.o > > ld: symbol(s) not found > > collect2: ld returned 1 exit status > > gcc > > -I/System/Library/Frameworks/JavaVM.framework/Versions/Current/Headers > > -DHasJava -fno-strict-aliasing > > -I/Users/jaugenstine/freeswitch/freeswitch/src/include > > -I/Users/jaugenstine/freeswitch/freeswitch/libs/libteletone/src > > -Werror -DMACOSX -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE > > -o .libs/mod_java.so -dynamic -bundle -force-flat-namespace mod_java.o > > -o .libs/mod_java.so freeswitch_java.o switch_swig_wrap.o > > -L/usr/local/lib > /Users/jaugenstine/freeswitch/freeswitch/.libs/libfreeswitch.1.0.0.dylib -lm > -lsqlite3 /usr/lib/libiconv.dylib > /Users/jaugenstine/freeswitch/freeswitch/libs/apr/.libs/libapr- 1.a -ldl > -lpthread > > make[5]: *** [mod_java.so] Error 1 > > > > make[4]: *** [all] Error 1 > > make[3]: *** [mod_java-all] Error 1 > > make[2]: *** [all-recursive] Error 1 > > make[1]: *** [all-recursive] Error 1 > > make: *** [all] Error 2 > > Neither mod_java nor any other module that uses C++ (eg. mod_python) > will currently link on MacOS, because on them maccies you apparently > have to link C++ code with g++ instead of ld like on every other > operating system in the world. > > You can probably link it manually by using g++ instead of gcc in that > last command, and dropping the -std=c99. > > > > _______________________________________________ > > Freeswitch-users mailing list > > Freeswitch-users(a)lists.freeswitch.org > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > > http://www.freeswitch.org > > Good luck > Damjan > > > > _______________________________________________ > Freeswitch-dev mailing list > Freeswitch-dev(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev > http://www.freeswitch.org >

1 0

wiki info
by Trixter aka Bret McDanel 20 Nov '07

20 Nov '07

I have created some templates for use in different pages. I need your help in placing them in appropriate places in the wiki content. I have examples on my wiki page http://wiki.freeswitch.org/wiki/User:Trixterso you can see them and learn how to add them. I have created some usage of different images to give you a feel for it on http://wiki.freeswitch.org http://wiki.freeswitch.org/wiki/Installation_Guide http://wiki.freeswitch.org/wiki/Getting_Started_Guide Please give me feedback on this, I think its better because it breaks up the text in a way that makes it easier to read, it also more clearly identifies what is a tip, what you should type, what is something to edit, etc. Feel free to create new templates, the ones I did can be accessed via http://wiki.freeswitch.org/wiki/Category:Templates In addition I plan on creating a few more for various bits of info which can automagically add pages to categories, and do a few other things. -- Trixter http://www.0xdecafbad.com Bret McDanel Belfast +44 28 9099 6461 US +1 516 687 5200 http://www.trxtel.com the phone company that pays you!

1 0

H323 and FreeSWITCH
by Brian West 19 Nov '07

19 Nov '07

ATTENTION: I would like to see a fully functional H323 endpoint module in FreeSWITCH before the first release... to make this do able I need to find funding so I can have someone clear the time to move forward. The guys are working very hard on the endpoint module and I thank them for the work but we need to step up dev and see if we can crank out this before release 1. Anyone willing to provide funding please find me off list ASAP and we'll talk. Thanks, Brian

1 0