- FreeSWITCH-users - FreeSWITCH Mailing Lists

How to play a prompt(mid-call) after calls are bridged
by Srini K 14 Jul '14

14 Jul '14

Hi, The call is bridged between leg a and leg b. How to play a prompt in the midcall only towards leg b after receiving some dtmf from leg b. After getting dtmf from leg b, I tried to play the prompt by bridgedSession = new ManagedSession(outBoundUuid); bridgedSession.StreamFille("prompt.wav", 0); But it didn't work. Do I need to do something similar to MoH? Thanks in advance.Srini

3 3

Any one have experience for Asterisk register on freeswitch ?
by Shaw X 14 Jul '14

14 Jul '14

I am newbee of freeswitch.( many year experience on asterisk / Elastix / freepbx) I checked freeswitch is great as a soft switch, and Asterisk (Elastix / freepbx / PIAF and so on) have more feature as the pbx. So my idea is using freeswitch as the the main hub ( to SIP trunk, which will provide hundreds DID to many PBXes like asterisk. I checked forum, looks the wiki only have FreeSwitch as the client of Asterisk, which my requirement is reverse. Asterisk as FreeSwitch client. I tested using x-lite can successfully register on freeswitch, and can dial in dial out with no problem, however, I using Asterisk (Elastix) register on FreeSwitch ( both public IP), at Asterisk side, I can see asterisk registered on freeswitch, however, I use another freeswitch exten (for example 1003 as example config) dial asterisk (exten 1000 ) system not working. ( voice response, "the exten 1000 is not available, ....".) but if I using x-lite register the free switch, 1003 can dial / ring 1000. system environment is Debian 7.5 with binary code from freeswitch. (not compile on the Debian VM) Debian 7.5 is install as a Virtual machine on VMware 5.5 host. another problem is MOH not working. Any ideas are appreciated.

2 1

Automation of calls?
by Bhavesh Soni 14 Jul '14

14 Jul '14

Guys, Are there APIs available to automate calls in freeswitch. DIALING: TIll now using mod_lua, I have tried "originate"; And I am able to establish a call(again tweaking some logs, i found endpoint URI and used this with originate); In logs I can see multiple UUIDs generated, and I dont know which one is the correct for the session initiated with which I can answer from other end. Answering: On other side, to answer incoming call, I am not able to find or do anything as of now. I have tried uuid_answer; but with no luck.(I tried uuid_answer with all different UUID I saw at originate), But no luck. Apart from these, are there other approaches. I am using freeswitch version 1.2.1(I know quite an old; but I dont have much liberty to update this.) -- Regards Bhavesh GS LAB (O) +91 20 4671 1256 (M) +91 86000 64681

3 6

mod_verto documentation, TURN support?
by martin.hoole＠emailn.de 14 Jul '14

14 Jul '14

Is there any client side javascript documentation available? I only found an example the demo https://confluence.freeswitch.org/display/FREESWITCH/mod_verto Does mod_verto support TURN (e.g. rfc5766-turn-server)?

2 1

undefined symbol: lua_settop
by Peter Villeneuve 13 Jul '14

13 Jul '14

Hi, I'm trying to use a lua script to grab voicemail PINs from Kamailio's db as shown here <http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc> However, I get the following error message which is driving me nuts. Googling for the "undefined symbol: lua_settop" error message doesn't seem to return anything relevant, and looking around the FS wiki here <https://wiki.freeswitch.org/wiki/Mod_lua> didn't help either. [ERR] mod_lua.cpp:199 error loading module 'luasql.mysql' from file '/usr/lib/x86_64-linux-gnu/lua/5.1/luasql/mysql.so': /usr/lib/x86_64-linux-gnu/lua/5.1/luasql/mysql.so: undefined symbol: lua_settop stack traceback: [C]: in ? [C]: in function 'require' /usr/local/freeswitch/scripts/sqluser.lua:14: in main chunk 2014-07-12 22:21:17.470474 [ERR] mod_lua.cpp:265 LUA script parse/execute error! Any ideas? Thanks

3 4

fs crashes so often
by Vladimir Getmanshchuk 13 Jul '14

13 Jul '14

Dear FS community, FS crushes almost each day on traffic about 1000 calls: # uname -a Linux fs-nas-119 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux root@fs-nas-119:/# dmesg -T| grep freeswitch [Thu Jul 3 06:11:22 2014] freeswitch[30274]: segfault at 40becb0 ip 00000000040becb0 sp 00007f61d2364350 error 15 [Thu Jul 3 06:31:09 2014] freeswitch[12766]: segfault at 7fedc65a3f30 ip 00007fedc65a3f30 sp 00007fedb6f36350 error 15 [Thu Jul 3 10:43:39 2014] freeswitch[26560]: segfault at 7fd3f09a4a50 ip 00007fd3f09a4a50 sp 00007fd3efc78350 error 15 [Thu Jul 3 17:28:20 2014] freeswitch[14847]: segfault at 20 ip 00007f06a459e762 sp 00007f06a440c820 error 4 in mod_lua.so[7f06a4576000+56000] [Fri Jul 4 06:12:11 2014] freeswitch[28342]: segfault at 7f68d4894900 ip 00007f68d4894900 sp 00007f6908697350 error 15 [Fri Jul 4 14:43:53 2014] freeswitch[10930]: segfault at 7f7be1ed8bd0 ip 00007f7be1ed8bd0 sp 00007f7bd338f350 error 15 [Sun Jul 6 07:28:47 2014] freeswitch[12078]: segfault at 7ff032dc29f0 ip 00007ff032dc29f0 sp 00007ff0dbad4350 error 15 [Sun Jul 6 07:33:42 2014] freeswitch[26655]: segfault at 20 ip 00007f00b683a762 sp 00007f00b66e4820 error 4 in mod_lua.so[7f00b6812000+56000] [Mon Jul 7 06:47:10 2014] freeswitch[17929]: segfault at 7fe208696690 ip 00007fe208696690 sp 00007fe237048350 error 15 [Mon Jul 7 08:50:56 2014] freeswitch[30751]: segfault at 7f8125e1d6a0 ip 00007f8125e1d6a0 sp 00007f80efb87350 error 15 [Wed Jul 9 13:57:46 2014] freeswitch[5363]: segfault at 7f93f1eb3670 ip 00007f93f1eb3670 sp 00007f93db13f350 error 15 [Sat Jul 12 17:22:00 2014] freeswitch[9506]: segfault at 7f37aa7db070 ip 00007f37aa7db070 sp 00007f37c5ab8350 error 15 # /usr/local/freeswitch/bin/freeswitch -version FreeSWITCH version: 1.4.5~64bit ( 64bit) # fs_cli -x "show calls count" 1041 total. PLUS: # dmesg -T| grep fs_cli [Thu Jul 3 17:46:25 2014] fs_cli[899]: segfault at 0 ip 00007f89d06003f7 sp 00007f89d10deca0 error 4 in libedit.so.2.11[7f89d05ea000+22000] [Thu Jul 3 17:59:37 2014] fs_cli[8668]: segfault at 0 ip 00007f35b09e73f7 sp 00007f35b14c5ca0 error 4 in libedit.so.2.11[7f35b09d1000+22000] [Wed Jul 9 21:57:41 2014] fs_cli[3222]: segfault at 0 ip 00007fa91f7f23f7 sp 00007fa9202d0ca0 error 4 in libedit.so.2.11[7fa91f7dc000+22000] Please advice, should I try to use stable fs version 1.4.2? -- Yours sincerely, Vladimir Getmanshchuk

2 1

Problem with installing skypopen
by farzad jahangiri sisakht 13 Jul '14

13 Jul '14

Hello I've been trying to add Skypopen to my freeswitch for a test but I get to below error when I need to build skypopen.ko OSS sound driver! [root@44128 oss]# make clean; make; insmod ./skypopen.ko; mknod /dev/dsp c 14 3 rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions make -C /lib/modules/2.6.32-042stab084.26/build M=/usr/src/freeswitch/src/mod/endpoints/mod_skypopen/oss LDDINC=/usr/src/freeswitch/src/mod/endpoints/mod_skypopen/oss/../include modules make: *** /lib/modules/2.6.32-042stab084.26/build: No such file or directory. Stop. make: *** [modules] Error 2 insmod: can't read './skypopen.ko': No such file or directory mknod: `/dev/dsp': File exists I'm using Centos 6.5 64b. Any help would be much appreciated. Farzad

1 0

Re: [Freeswitch-users] opus and freeswitch
by Kamil Nigmatullin 12 Jul '14

12 Jul '14

Opus is meant to be dynamic. It has everything inside the library. But you should feed the parameteres of how the server sees client and vise versa. So I think it is a Skype's behaviour and that's why it is works good in internet enviroment. However, Kristian, the man who respond me first time, thinks of it a bit different way. 2014-07-11 23:15 GMT+06:00 Yosi Taguri <yosi(a)taguri.com>: > We're moving away to freeswitch these days. > What algorithm did you use to make opus dynamic? > — > Sent from Mailbox <https://www.dropbox.com/mailbox> > > > On Fri, Jul 11, 2014 at 7:47 PM, Kamil Nigmatullin < > kamil.nigmatullin(a)gmail.com> wrote: > >> Hello, >> We have our own sip stack written on Android's Java and rtp side written >> in C. With Server side we actually do not have ready solution now. Mod opus >> works, but as I said it has statically defined parameters that actually cut >> off all great features of opus codec. We may be implementing it inside >> mod_opus somehow or maybe by modifying rtpproxy. Defenetly it won't be >> asterisk. >> >> >> 2014-07-11 20:11 GMT+06:00 Yosi Taguri <yosi(a)taguri.com>: >> >>> Hi Kamil, >>> Noticed the thread on freeswitch and you saying that you figured it out >>> on the client side. >>> What sip stack are you using? >>> What did you end up doing on the server side? >>> >>> We struck the same problem with asterisk. >>> >>> -- >>> >>> Yosi Taguri | Founder & CTO | Yalo | http://yaloapp.com >>> <http://ahhhpah.com> | Mobile: +972-54-4816020 | Google Voice US >>> Mobile: +1 (415) 935-1126 | Email: yosi(a)taguri.com >>> >>> >>> >> >> >> -- >> Kamil Nigmatullin >> Manager >> Tel: 77272323748 >> mob: 7 777 2517003 >> ICQ: 31008382 >> Skype: Kamil Nigmatullin >> > > -- Kamil Nigmatullin Manager Tel: 77272323748 mob: 7 777 2517003 ICQ: 31008382 Skype: Kamil Nigmatullin

2 1

FreeSWITCH Friday BugHunt Reminder!
by Ken Rice 11 Jul '14

11 Jul '14

FreeSWITCHers, Do not forget to join us at 2PM CST for the FreeSWITCH Friday BugHunt Call sip:888@conference.freeswitch.org or see http://ift.tt/1prwIZL for access info! -- Ken http://ift.tt/vGSsGm http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH @ClueCon

1 0

mod_v8 and MongoDB / MySQL
by Normando Hall 11 Jul '14

11 Jul '14

Dear all I will use JS scripts to control FS behaviour but I can't figured how to get access to certain databases like MongoDB or MySQL using mod_v8 engine. Any help will be apreciate. Regards Normando

2 2