- FreeSWITCH-users - FreeSWITCH Mailing Lists

SOLVED: problems with mod_skypopen
by Giovanni Maruzzelli 13 Aug '14

13 Aug '14

Following the hint from ThunderZ, I can announce a rough solution (I'll document it better next week): 1) you install the skype client downloaded by install.pl in a regular desktop linux 2) on desktop you load skypopen.ko and make the sound device as per start-skype-clients script 3) you start the skype instance on desktop 4) on desktop you connect to the skype net with username and password and set the "login at startup" checkbox 5) on desktop you compile the client.c you found in configs dir of the mod_skypopen source, as per the first line of the client.c file 6) on desktop you exec the client.c program you just compiled 7) on desktop you give the skype client authorization to be connected from skypopen application and check the "no ask again" checkbox 8) on desktop you exec the client.c program again to be sure it connect no problem 9) on desktop you save a copy of the entire ~/.Skype directory and cp it on server 10) on server you use that copy as a substitute of /usr/local/freeswitch/skypopen/skype_clients_configuration_dir/skype101 to skypeN (eg you copy it N times to skype101 skype102 etc) 11) on server you modify the startup_skype_clients.sh script so it simply launches the skype client, without username and password on stdin and without --pipelogin option It takes a little time and patience, but it works, and seems robust as before. The gateway skype-FreeSWITCH conference call is back online, answering at skypeusername "freeswitch_conf_call", as always :). -giovanni

4 19

Postgres Configuration
by Joel White 13 Aug '14

13 Aug '14

I am implementing Postgres in the core and would like to also store usernames and passwords as well. I already have a script that allows for auto provisioning of Polycom devices from a db. Does anyone know the correct settings I should have in the Postgres DB ? I am following the Freeswitch Dbh Lua instructions here https://wiki.freeswitch.org/wiki/Lua_freeswitch_dbh I just want to make sure I create the right table and columns in the database as to not have issues later. Thank you in advance

1 0

Stash down?
by Steven Ayre 13 Aug '14

13 Aug '14

Is anyone else finding that stash.freeswitch.org is unavailable? git clone/pull commands are hanging before timing out with 502, web interface is also unavailable Confluence also seems to be down, although Jira is fine.

2 1

INTERWORKING status code
by Grant Bagdasarian 13 Aug '14

13 Aug '14

Hello, I'm receiving the following code when placing an outbound call to a certain Dutch mobile number: 0da3e95e-221d-11e4-83ec-c5c26124a006 2014-08-12 14:35:23.714781 [DEBUG] sofia.c:4970 Remote Reason: 127 0da3e95e-221d-11e4-83ec-c5c26124a006 2014-08-12 14:35:23.714781 [DEBUG] sofia.c:5752 Channel sofia/external/0031612345678@1.1.1.1:5060 entering state [terminated][480] 0da3e95e-221d-11e4-83ec-c5c26124a006 2014-08-12 14:35:23.714781 [NOTICE] sofia.c:6563 Hangup sofia/external/0031612345678@1.1.1.1:5060 [CS_EXCHANGE_MEDIA] [INTERWORKING] Weird this is that his phone is turned on and connected to the mobile network, but it does not ring. What does INTERWORKING mean? Regards, Grant

3 3

How configure outbound calls with Voxbeam on Freeswitch
by William Valdez 13 Aug '14

13 Aug '14

I add a gateway with this information: <gateway name="voxbeam"> <param name="register" value="false"/> <param name="username" value="billing(a)algo.com"/> <param name="from-user" value="billing(a)algo.com"/> <param name="password" value="aaaaaa" /> <param name="proxy" value="sbc.voxbeam.com"/> <param name="realm" value="sbc.voxbeam.com"/> <param name="expire-seconds" value="300"/> <param name="retry-seconds" value="30"/> </gateway> And in conf/dialplan/default/default.xml I add this to outbound calls. <extension name="salientes"> <condition field="destination_number" expression="^(\d{11})$"> <action application="bridge" data="sofia/gateway/VoxbeamO/0011103$1" /> </condition> </extension> Like in the pdf provider for voxbeam. And ever have this error in freeswitch log. 2014-08-12 12:41:32.103359 [INFO] mod_dialplan_xml.c:558 Processing 10105 <10105>->14158450254 in context default 2014-08-12 12:41:32.103359 [NOTICE] switch_channel.c:1054 New Channel sofia/default/001110314158450254 [3031bf713-4828-8928-3cc97b75f4ca] 2014-08-12 12:41:32.163383 [NOTICE] sofia.c:7087 Hangup sofia/default/001110314158450254 [CS_CONSUME_MEDIA] [NORTEMPORARY_FAILURE] 2014-08-12 12:41:32.183367 [INFO] mod_dptools.c:3234 Originate Failed. Cause: NORMAL_TEMPORARY_FAILURE WHAT I DOING WRONG ??? PLEASE HELPME !!

2 1

Re: [Freeswitch-users] setting per user variables in dial plan.
by Juan Cabrio 13 Aug '14

13 Aug '14

Thanks Chris, I've moved to a perl dialplan based on the freeswitch controller.pl example. I'm basically seeing the same thing where the custom variables set via originate seem not to be available until the call is bridged. I do see the variables listed on the console well before the bridge. Perhaps the way i'm trying to get to the variable is the issue. I seem to only have access to the standard channel variables when using $session with GetVariable. Juan.

1 0

Location of freeswitch_http.log
by Oleg Stolyar 13 Aug '14

13 Aug '14

Hi guys, is there a way to change the location of this file freeswitch_http.log? Or alternatively change the value of the SWITCH_GLOBAL_dirs.log_dir variable that the location of freeswitch_http.log is based on?

2 2

FreeTDM, CallerID and Originate problems
by Adam Voisey 12 Aug '14

12 Aug '14

Hi, I'm having a bit of trouble with FreeTDM, Sangoma Wanpipe and an A200 analogue card. I was struggling getting caller ID to work for incoming calls, but after asking the IRC channel it turned out to be my settings were incorrect. However upon correcting them, I've run into another problem. Short Issue: Caller ID is available but can't originate OR able to originate but can't fetch caller ID. Please see below for some logs/settings. CallerID on incoming calls is available when setting the following in freetdm.conf.xml; <param name="answer-polarity-reverse" value="true"/> <param name="hangup-polarity-reverse" value="true"/> <param name="polarity-callerid" value="true"/> However, outbound originates such as "originate freetdm/FXO/a/078******53 &transfer(4000 XML default)" seem to "stick" at this point; 2014-08-12 19:04:59.470598 [DEBUG] ftdm_io.c:3976 [s1c1][1:1] Generating DTMF [078******53] 2014-08-12 19:04:59.470598 [DEBUG] ftmod_wanpipe.c:938 [s1c1][1:1] First packet write stats: Tx queue len: 1, Tx queue size: 5, Tx idle: 2661 2014-08-12 19:05:00.070585 [DEBUG] ftdm_io.c:3780 [s1c1][1:1] Queuing DTMF 0 (debug = 0) 2014-08-12 19:05:00.670577 [DEBUG] ftdm_io.c:3780 [s1c1][1:1] Queuing DTMF 8 (debug = 0) 2014-08-12 19:05:01.270587 [DEBUG] ftdm_io.c:3780 [s1c1][1:1] Queuing DTMF 4 (debug = 0) 2014-08-12 19:05:01.870631 [DEBUG] ftdm_io.c:3780 [s1c1][1:1] Queuing DTMF 3 (debug = 0) 2014-08-12 19:05:02.470593 [DEBUG] ftdm_io.c:3780 [s1c1][1:1] Queuing DTMF 5 (debug = 0) 2014-08-12 19:05:02.790593 [DEBUG] ftdm_io.c:3780 [s1c1][1:1] Queuing DTMF 3 (debug = 0) 2014-08-12 19:05:04.750618 [DEBUG] ftmod_analog.c:507 [s1c1][1:1] Changed state from DIALING to PROGRESS_MEDIA 2014-08-12 19:05:04.770592 [DEBUG] ftmod_analog.c:638 [s1c1][1:1] Completed state change from DIALING to PROGRESS_MEDIA in 20 ms 2014-08-12 19:05:04.770592 [DEBUG] ftmod_analog.c:644 [s1c1][1:1] Executing state handler on 1:1 for PROGRESS_MEDIA ****** Phone B-Leg actually answered here ****** 2014-08-12 19:05:57.010614 [NOTICE] switch_ivr_originate.c:3467 Hangup FreeTDM/1:1/078******53 [CS_CONSUME_MEDIA] [NO_ANSWER] 2014-08-12 19:05:57.010614 [DEBUG] switch_channel.c:3222 Send signal FreeTDM/1:1/078******53 [KILL] 2014-08-12 19:05:57.010614 [DEBUG] switch_core_session.c:1387 Send signal FreeTDM/1:1/078******53 [BREAK] 2014-08-12 19:05:57.010614 [DEBUG] switch_core_state_machine.c:472 (FreeTDM/1:1/078******53) Running State Change CS_HANGUP 2014-08-12 19:05:57.010614 [DEBUG] switch_core_state_machine.c:735 (FreeTDM/1:1/078******53) Callstate Change DOWN -> HANGUP 2014-08-12 19:05:57.010614 [DEBUG] switch_core_state_machine.c:737 (FreeTDM/1:1/078******53) State HANGUP 2014-08-12 19:05:57.010614 [DEBUG] mod_freetdm.c:544 [1:1] FreeTDM/1:1/078******53 CHANNEL HANGUP ENTER 2014-08-12 19:05:57.010614 [DEBUG] mod_freetdm.c:590 [s1c1][1:1] Changed state from PROGRESS_MEDIA to HANGUP 2014-08-12 19:05:57.010614 [DEBUG] ftmod_analog.c:638 [s1c1][1:1] Completed state change from PROGRESS_MEDIA to HANGUP in 4 ms 2014-08-12 19:05:57.010614 [DEBUG] ftmod_analog.c:644 [s1c1][1:1] Executing state handler on 1:1 for HANGUP 2014-08-12 19:05:57.010614 [DEBUG] mod_freetdm.c:643 [1:1] FreeTDM/1:1/078******53 CHANNEL HANGUP EXIT 2014-08-12 19:05:57.010614 [DEBUG] ftmod_wanpipe.c:982 [s1c1][1:1] Rx Queue length exceeded 80% threshold (9/10) 2014-08-12 19:05:57.010614 [DEBUG] switch_core_state_machine.c:60 FreeTDM/1:1/078******53 Standard HANGUP, cause: NO_ANSWER Eventually failing with a no-answer, even though it has been. If I switch the polarity settings to false, then outbound calls work; <param name="answer-polarity-reverse" value="false"/> <param name="hangup-polarity-reverse" value="false"/> However, I don't receive a Caller ID on inbound calls. So I'm stuck between either being able to originate calls but not getting an inbound ID or receiving calls with an ID but not being able to originate. Swapping the polairty options to true/false, false/true doesn't seem to work either - although I thought it may be worth checking. I'm in the UK using BT/Sky as my line provider who use V23 for sending the CLI. Any ideas? Thanks

3 2

how to retrive data from mysql ODBC in chat.lua script ?
by Shabbir abbasi 12 Aug '14

12 Aug '14

i am testing a script new_chat.lua script is below #!/usr/bin/lua local dbh = freeswitch.Dbh("odbc://dbname:db_username:db_passwd") -- connect to ODBC database assert(dbh:connected()) -- exits the script if we didn't connect properly if dbh:connected() == false then freeswitch.consoleLog("ALERT", "lua cannot connect to database" .. dsn .. "\n"); end sql_query = "SELECT * FROM cc_card WHERE id ='197'" dbh:query(sql_query ,function(row) for key, val in pairs(row) do key = val end freeswitch.consoleLog("INFO"," inside QUERY lastname = " .. row.lastname .. "\n"); freeswitch.consoleLog("INFO"," inside QUERY redial = " .. row.redial .. "\n"); end) freeswitch.consoleLog("INFO"," outside QUERY lastname = " .. row.lastname .. "\n"); freeswitch.consoleLog("INFO"," outside QUERY redial = " .. row.redial .. "\n"); freeswitch.consoleLog("INFO"," outside QUERY lastname = " .. lastname .. "\n"); freeswitch.consoleLog("INFO"," outside QUERY redial = " .. redial .. "\n"); dbh:release() -- optional but here is some problum in this script inside query lines are working but outside query lines are not working WHY ?? any suggestions are very wellcome

2 2

ClueCon Pix wanted!
by Ken Rice 12 Aug '14

12 Aug '14

Did you take pix at ClueCon? Mind if I have a copy of them? Post them to imgur.com or dropbox and send me a link! Lets see what kind of gallery we can build via crowd sourcing this year! K -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH

1 0