- FreeSWITCH-users - FreeSWITCH Mailing Lists

group_confirm with inband DTMF detection
by Vladimir Ralev 19 Aug '14

19 Aug '14

Hi all, I want to enable FS to accept inband DTMF with the group confirmation. I tried to do start_dtmf action on the call legs, however that action is only executed after the confirmation, so the actual confirmation requires an out of band DTMF. Here is one example that demonstrates the issue: originate {group_confirm_file=/tmp/ivr-group_confirm.wav,group_confirm_key=1,call_timeout=60}sofia/sipinterface/number@provider &start_dtmf() Any ideas? Ideally I want to enable system-wide inband DTMF detection in a safe way at some CPU cost.

2 2

FS-HA RTP state
by Alex Balashov 18 Aug '14

18 Aug '14

Hi, Sorry for the newbie question. Regarding this: https://wiki.freeswitch.org/wiki/Freeswitch_HA How does FreeSWITCH pick up and resume RTP stream state in this scenario, vis-a-vis the RTP sequence numbers? Or does it not? I don't really know how RTP works through the FreeSWITCH core. Based on the fact that this type of failover works, I am guessing that Freeswitch has several modes of RTP relay in a channel bridge: (1) Where the RTP is regenerated/reoriginated with logically independent SSRC and sequence numbers, which would presumably be used in situations where invasive DSP work, transcoding and/or other heavy media involvement is required of the FreeSWITCH core. I assume this involves marshalling the audio payload onto some sort of generic internal audio frame bus, too. (2) "Light" mode, analogous to Asterisk's "Packet2Packet" bridging, where the RTP is relayed more or less as-is between the endpoints, without this type of mediation. This would presumably pass through the endpoints' respective RTP stream properties. Is it reasonable to assume that the call recovery functionality relies on #2, which would imply that the calls cannot be transcoded, use in-band DTMF signalling, etc? Thanks! -- Alex -- Alex Balashov - Principal Evariste Systems LLC Tel: +1-678-954-0670 Web: http://www.evaristesys.com/, http://www.alexbalashov.com/ Please be kind to the English language: http://www.entrepreneur.com/article/232906

2 1

transcoding error fs 1.2.11
by Jason Holden 18 Aug '14

18 Aug '14

All. I have my endpoints setup to use PCMU but FS is still stating its transcoding the call. Also have the codec list setup to greedy. Fs 1.2.11 git version aa68eac Any suggestions on how to proceed?

2 1

luasql
by Joel White 18 Aug '14

18 Aug '14

I have (or so I thought) installed all dependencies for Lua to connect to a postgres db in freeswitch. When I run the Lua script though I get this message 2014-08-14 08:16:20.832901 [ERR] mod_lua.cpp:203 /usr/local/freeswitch/scripts/db_connect.lua:12: module 'luasql.postgres' not found: no field package.preload['luasql.postgres'] no file './luasql/postgres.lua' no file '/usr/local/share/lua/5.1/luasql/postgres.lua' no file '/usr/local/share/lua/5.1/luasql/postgres/init.lua' no file '/usr/local/lib/lua/5.1/luasql/postgres.lua' no file '/usr/local/lib/lua/5.1/luasql/postgres/init.lua' no file './luasql/postgres.so' no file './libluasql/postgres51.so' no file '/usr/local/lib/lua/5.1/luasql/postgres.so' no file '/usr/local/lib/lua/5.1/libluasql/postgres51.so' no file '/usr/local/lib/lua/5.1/loadall.so' no file './luasql.so' no file './libluasql51.so' no file '/usr/local/lib/lua/5.1/luasql.so' no file '/usr/local/lib/lua/5.1/libluasql51.so' no file '/usr/local/lib/lua/5.1/loadall.so' I do have lua-sql-postgres installed on Debian 7 as well as libpq-dev and all other mentioned packages How do I correct the issue of FreeSWITCH not seeing lua-sql-postgres?

2 2

mod_v8.so
by Mujahid Ali 18 Aug '14

18 Aug '14

i install freeswitch by 1) rpm -Uvh http://files.freeswitch.org/freeswitch-release-1-0.noarch.rpm 2) yum install --nogpgcheck freeswitch-config-vanilla and 3) yum install freeswitch-v8.x86_64 but there is no "mod_v8.so" in the following path "/usr/lib64/freeswitch/mod/" but "v8.conf.xml" is also in the following directory "/etc/freeswitch/autoload_configs" NOTE: i also enable the v8 module in "modules.conf.xml" file. When i run "load mod_v8" in freeswitch CLI it return the following error switch_loadable_module.c:1448 Error Loading module /usr/lib64/freeswitch/mod/mod_v8.so **/usr/lib64/freeswitch/mod/mod_v8.so: cannot open shared object file: No such file or directory** how can i solve it ?

2 1

Freetdm not detecting dtmf on bleg
by satyajeet vyas 18 Aug '14

18 Aug '14

I am writing a script where A calls to FS which connects it to B... Then B dial some extension on (bind_digit_action *1)...I am calling a lua script on *1 which ask for extension and check it in database to fetch the Corresponding number and then connect it(C) with A. Everything is working fine with sofia/gateway. But when i run same code on different server which is using Freetdm then i am unable to get the DTMF(extension) through lua file. I also tried using "start_dtmf" but its not working. Basically i am not getting any DTMF on Bleg (Except *1). So any suggestion..!

1 0

Re: [Freeswitch-users] high pdd (how to debug)
by andretodd＠verizon.net 18 Aug '14

18 Aug '14

3 2

Codec change for mod_esf
by Siri MM 18 Aug '14

18 Aug '14

Hi, I am trying to use mod_esf in order to achieve multicast streaming. Wiki says that the packets sent are always G.711 mu-Law/PCMU(8khz). Is there a way I could change this at all? I am looking at L16 48KHz as thats the requirement for my end points. Thanks!

1 1

Re: [Freeswitch-users] high pdd (how to debug)
by Dave Kompel 17 Aug '14

17 Aug '14

Tony and Andre, Rather than going back and forth on this matter, here are the instructions on how you can find out exactly what is going on. On your target system, make sure you have the sysinternals tools installed, and in your path. This will enable you to use procdump from the command line. When FS gets into the state with an assload of hung threads, use procdump to take a full dump. This will be a very large file. Copy the .dmp file from the target box, to the build box, if they’re the same then forgot about copying it. Now on your build box, open the FS solution in VS. Then in VS from the File->Open menu, open the .DMP file. This will put you in the debugger, just as if you were running FS under a debugger. Check the Threads windows and see if a buttload of threads are all hung in the same place. Double clicking on the thread will push that thread into the call stack window. Now you can see where the thread is hung. If it’s in a kernel call go up the strack till you get to code in FS. Double click on that stack frame, that will open you to the line of source code at the point it got hung. In the source window it’s just like in the debugger. Hover over any variable to see it’s value. This is the same process for doing it under linux, but rather than using GDB you have the full VS GUI debugger experience. Tony, you can quote him the same if he gives you access to the build box, as you would for someone that gave you access to a dump and GDB. Because you most likely will have a lot of threads all hung in the same place, and threads call stack, and source code are in different windows, this should take about 10 minutes to find out what’s going on. --Dave From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Sunday, August 17, 2014 2:53 PM To: Freeswitch-users Subject: Re: [Freeswitch-users] high pdd When you refer to more getting performance as getting it fixed, it strikes a nerve. Start with what I said and test for same results on debian 7 to have clarity if you have a windows specific performance limitation. There might be up to 1 million lines of code difference between windows and *nix. We can't even tell you how much to pay unless we know there is something to change. Also there is no indication you are using realistic traffic to test. All of these details are critical. On Aug 17, 2014 1:43 PM, "Andre Demattia" <andretodd(a)verizon.net> wrote: Thanks, I'm using the newest master and the last stable 1.2.23 We are willing to pay to get this fixed. Andre From: Anthony Minessale Sent: ‎8/‎17/‎2014 12:30 PM To: Freeswitch-users Subject: Re: [Freeswitch-users] high pdd We dont have a lot of tools to troubleshoot windows. You should mention windows in your subject to have a better chance to get the attention of our windows users. You should consider installing debian 7 on the same hardware and perform similar tests to help determine if your issue is o/s specific or not. You also have not indicated the revision of FS. If you have not worked with latest master, you should be also to rule out improvements. On Aug 17, 2014 9:54 AM, "Andre Demattia" <andretodd(a)verizon.net> wrote: Yes that's off and I believe all the databases are off too. No authentication or registration is enabled. The sizes of the database are 0 until I call the shutdown command then its about 90k. I have the DBS in Ra drive too. Windows seems pretty good until the 3000 sessions per min mark. Then I just get long pdd and the threads get backed up then no more sessions can be created. Funny thing is I has 10 profiles and the same results. I also tried two consoles with the same results. FreeSWITCH is great. I'd be grateful for help. I've worked on this for 2 years and hate to give up. If any one from consulting(a)freeswitch.org is willing to help I'd appreciate that. Thanks again, Andre From: Anthony Minessale Sent: ‎8/‎17/‎2014 10:13 AM To: Freeswitch-users Subject: Re: [Freeswitch-users] high pdd Did you comment out manage-presence ? Also we have no real idea how well FS performs in windows under extreme load. On Aug 17, 2014 5:42 AM, "Andre Demattia" <andretodd(a)verizon.net> wrote: Thanks Ken, I'll try the consulting again. Andre From: Ken Rice Sent: ‎8/‎17/‎2014 1:19 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] high pdd if the last post does not work contact consulting(a)freeswitch.org for pro help from one of the developers... thats about as far as the list will take you Ken Sent from my iPad On Aug 16, 2014, at 15:23, "Andre" <andretodd(a)verizon.net> wrote: Going with the idea it’s IO related I did a db_cache status. I just disabled limit in my code by removing it but limit should be HASH not a database however I stills how a database. Below is the results of the db cache status. I’m not real sure what its saying. I should have all registration and limit disabled and should not be using any sql database from my understanding. Anyone know what the results mean? I’ve only tested 2 calls on this status. [The entire original message is not included.] _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users [The entire original message is not included.] _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

Re: [Freeswitch-users] high pdd
by aademattia＠comcast.net 17 Aug '14

17 Aug '14

I also have issues in Windows after 1000-1500 ports bridge with 200-300 connect calls and 150 cps. I see a lot of reinvent. I am using imbedded. It's almost like the threading is getting backed up and the events don't fire. I am running in a ram drive with no sql, no cdr and presence not on. Funny thing I found it's not a cps issue but more of port/channels issue. Always failed due to ports but never crash and no errors. Andrew Sent from my HTC ----- Reply message ----- From: "Anthony Minessale" <anthony.minessale(a)gmail.com> To: "Freeswitch-users" <freeswitch-users(a)lists.freeswitch.org> Subject: [Freeswitch-users] high pdd Date: Sun, Aug 17, 2014 10:13 AM Did you comment out manage-presence ? Also we have no real idea how well FS performs in windows under extreme load. On Aug 17, 2014 5:42 AM, "Andre Demattia" <andretodd(a)verizon.net> wrote: Thanks Ken, I'll try the consulting again. Andre From: Ken Rice Sent: ‎8/‎17/‎2014 1:19 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] high pdd if the last post does not work contact consulting(a)freeswitch.org for pro help from one of the developers... thats about as far as the list will take you Ken Sent from my iPad On Aug 16, 2014, at 15:23, "Andre" <andretodd(a)verizon.net> wrote: Going with the idea it’s IO related I did a db_cache status. I just disabled limit in my code by removing it but limit should be HASH not a database however I stills how a database. Below is the results of the db cache status. I’m not real sure what its saying. I should have all registration and limit disabled and should not be using any sql database from my understanding. Anyone know what the results mean? I’ve only tested 2 calls on this status. [The entire original message is not included.] _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www..freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0