- FreeSWITCH-users - FreeSWITCH Mailing Lists

DTMF from cell phones
by Jan Kubr 05 Dec '08

05 Dec '08

Hi, recently someone was mentioning an issue with DTMF here, but there was no solution. I have a similar problem, when calling Freeswitch from my cell phone (via a SIP provider), sometimes DTMF is not recognized (read app doesn't terminate). I could not find any regularity in this, sometimes it is recognized just fine, sometimes I had to wait for the file to be played etc. The important thing to note is that when using a SIP softphone (X-Lite) I have never had this problem, DTMF is recognized perfectly. So it's probably related to GSM or something. I was wondering whether anyone experienced the same and whether there is something I can do about it. There are a few DTMF-related variables in the config files (dtmf-duration, pass-rfc2833, rfc2833-pt, dtmf-type, default_dtmf_duration, max_dtmf_duration) and I played with them a bit, but I don't really know what I'm doing.. Couldn't find any docs, either. Any ideas would be appreciated. Jan Kubr

3 2

Handling directory of sound files
by Faisal Maqsoodi 05 Dec '08

05 Dec '08

Its not without music on hold completely. Say, e.g, moh is being played but when i press 1 it should start playing files contained in a specific directory sequentially or randomly. I havent got any solution to this problem yet. Can anyone plz guide me to some documentation or anything else regarding this matter. Faisal

1 0

Problem reloading xml
by Joe Bain 05 Dec '08

05 Dec '08

Hi all, I have come across a strange problem when using the phrases in conf/lang/en. Initially I had a problem where FreeSwitch wouldn't load new subdirectories, even when I included their paths in the en.xml file. I went ahead writing all the phrases (I only have 3 so far) in en.xml but now it doesn't recognise even these properly. I thought there might be some conflicts with the naming of phrases so I deleted all the included demo phrases and commented their lines out of the en.xml file but when I do 'reloadxml' I get the error: Error including C:\Program Files (x86)\FreeSWITCH\conf\lang\en\demo/*.xml (No su ch file or directory) Error including C:\Program Files (x86)\FreeSWITCH\conf\lang\en\test/*.xml (No su ch file or directory) Error including C:\Program Files (x86)\FreeSWITCH\conf\lang\en\vm/sounds.xml (No such file or directory) This persists after restarting FS too. Very confusing, any ideas? I am running FS on Vista 64 bit, but with the 32 bit version. The version of FS is "FreeSWITCH Version 1.0.trunk (10175M)". Thanks Joe

1 0

Javascript ODBC on Windows
by Joe Bain 05 Dec '08

05 Dec '08

Hi all, Is it possible to use mod_spidermonkey_odbc with a Windows installation of FreeSWITCH at the moment? If so does anyone have any pointers? I get: 2008-12-02 14:23:57 [DEBUG] switch_odbc.c:145 switch_odbc_handle_connect() Connecting ivr_test 2008-12-02 14:23:57 [ERR] switch_odbc.c:160 switch_odbc_handle_connect() STATE: IM002 CODE 0 ERROR: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified when I try. Thanks in advance, Joe Bain

2 2

Handling directory of sound files
by Faisal Maqsoodi 05 Dec '08

05 Dec '08

Hi, Can i accomplish folder tasks with freeswitch? For instance, i need to play all sound files contained in a directory sequentially or randomly. Plz help me doing this. Faisal

2 2

Nice FS article
by Michael Collins 05 Dec '08

05 Dec '08

Check it out: http://digg.com/software/FreeSWITCH_knocks_Asterisk_s_block_off Please diggit left and right!! -MC

1 0

voicemail disk quota poll
by Tamas Cseke 05 Dec '08

05 Dec '08

Hello, I would like to use a disk quota in users' voicemail (http://jira.freeswitch.org/browse/MODAPP-173) We haven't decided yet what would be the better prompts to play to the caller when the mailbox is full. Please advice some messages! Thanks in advance, Tamas

6 6

re gistration and calls through different user agent
by Carole O. 04 Dec '08

04 Dec '08

Hello, I have recently installed freeswitch on Opensuse 10.3. I have a question about the sofia agents which are already present in the default installation: I have 2 snom phones (each with a user1001 and user1002), I configured one such that it registered on the default port 5060 (so on the user agent internal) and the other one on the port 5080 (on the external user agent). The aim was to see what happen. Since both were able to register I guess that the directory /directory/default/ is used by both sofia agent else user1002 should not be able to register, isn't? I am confused here because I would have said that the directory /directory/default/ was just for the users that register on internal... I had a second problem: if user1001 tries to call user1002 it did not work (but the opposite is ok). Has this something to do with the dialplan? Thanks, Carole -- View this message in context: http://www.nabble.com/registration-and-calls-through-different-user-agent-t… Sent from the Freeswitch-users mailing list archive at Nabble.com.

2 1

mod_spidermonkey() Session is not active!
by Faisal Maqsoodi 04 Dec '08

04 Dec '08

Hi I m trying to use a Javascript application which uses mod_pocketsphinx and mod_spidermonkey. Both r loaded but this error msg is displayed: 2008-12-04 16:31:09 [ERR] inline:1 mod_spidermonkey() Session is not active! How can i remove this error? Faisal

1 0

freeswitch enum
by Pieter Eduard 04 Dec '08

04 Dec '08

Hi, I'm trying to query freeswitch to use my bind base enum server but i'm having trouble to query the enum from Freeswitch CLI. this what i did, i add 7.6.5.4.3.2.1.e164.arpa at my dns and after restart the dns, i have this : [root@fsbox]# host -t naptr 8.7.6.5.4.3.2.1.e164.arpa localhost Using domain server: Name: localhost Address: 127.0.0.1#53 Aliases: 8.7.6.5.4.3.2.1.e164.arpa has NAPTR record 10 10 "U" "E2U+tel" "!^.*$!tel:\\12345678!" . 8.7.6.5.4.3.2.1.e164.arpa has NAPTR record 5 10 "U" "E2U+sip" "!^.*$!sip:1000@test.com!" . and if use the ip, the result is the same : [root@fsbox]# host -t naptr 8.7.6.5.4.3.2.1.e164.arpa 1.2.3.4 Using domain server: Name: 1.2.3.4 Address: 1.2.3.4#53 Aliases: 8.7.6.5.4.3.2.1.e164.arpa has NAPTR record 5 10 "U" "E2U+sip" "!^.*$!sip:1000@test.com!" . 8.7.6.5.4.3.2.1.e164.arpa has NAPTR record 10 10 "U" "E2U+tel" "!^.*$!tel:\\12345678!" . But if i try to query from the freeswitch CLI that's installed in the same box, i get this : freeswitch@fsbox> enum 12345678 localhost API CALL [enum(12345678 localhost)] output: No Match! freeswitch@fsbox> enum 12345678 1.2.3.4 API CALL [enum(12345678 1.2.3.4)] output: No Match! even if i change the enum.conf.xml dns root with my enum ip and reload the freeswitch i still get the same error. Can anyone help me on this? i just want the fs to query on my local enum or to query on different enum server. Regards, -Pieter-

2 4