- FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] XML config file parsing
by Samuel Mukoti 26 Nov '09

26 Nov '09

Thx Jason for the reply, I realise i was quite unclear in what i'm hoping to achieve. I wanted to make a control panel for our office so that we can provision extensions at the same time as we do users. We have a system much like the "ubuntu ebox" that allows use to manage users for our organization and for virtual domains - it uses postgresql as a backend. I'm not aware of freeswitch's abilities or features when it comes to databases. Can freeswitch lookup SQL tables in realtime? I would love the ability to manage dialplans, voicemail accounts, and extensions/endpoints thru a database much like mysql or postgresql The reason i was discussing XML is for this very same purpose, i though i could write helper scripts that would 'spit' out some XML configuration files thus dynamically updating Freeswitch configuration from a web frontend.. almost similar to what the freepbx.org guys have done. regards, Sam

5 5

B Leg Account Code on Fail Over dialing
by Michael Toop 26 Nov '09

26 Nov '09

Hi Everyone, How do I get the outbound sofia SIP route that the call took into a CDR when using fail over dialing with the 'bridge' application? ...I have tried numerous approaches with no luck, this last attempt pasted below did not work either: dialString = "{provider=providerB}sofia/gateway/sipB/%s|{provider=providerC}sofia/gateway/sipC/%s" % (numberToDial, numberToDial) session.execute("bridge",dialString) I am using mod_python and this line is in the Python module called in the dialplan. Thanks! Michael

2 1

Help Freeswitch with Voipuser Gateway
by Sam Abekah-Mensah 26 Nov '09

26 Nov '09

I need help as I cannot receive calls through VOIPUSER. This is a learning setup Attached are my conf files. What is wrong with them ? When I dial from a landline I get a continuous beep. Attached are my gateway and the conf file to transfer. Sopfia Status is my screen message. I can see a FAIL and cannot make head or tail of all that message. Hopefully anyone using voipuser or in fact any of you clever folks can make sense of this. Thanks for your time. 2009-11-21 22:07:15.642652 [DEBUG] sofia_glue.c:2811 Activate Buggy RFC2833 Mode! 2009-11-21 22:07:15.642652 [DEBUG] sofia_glue.c:3071 Audio Codec Compare [PCMA:8:8000:0]/[PCMU:0:8000:20] 2009-11-21 22:07:15.650807 [DEBUG] sofia_glue.c:3071 Audio Codec Compare [PCMA:8:8000:0]/[PCMA:8:8000:20] 2009-11-21 22:07:15.672560 [DEBUG] sofia_glue.c:2029 Set Codec sofia/external/nobody(a)213.166.5.133 PCMA/8000 20 ms 160 samples 2009-11-21 22:07:15.676936 [DEBUG] sofia_glue.c:3031 Set 2833 dtmf payload to 101 2009-11-21 22:07:15.676936 [DEBUG] sofia.c:3455 (sofia/external/nobody(a)213.166.5.133) State Change CS_NEW -> CS_INIT 2009-11-21 22:07:15.676936 [DEBUG] switch_core_session.c:932 Send signal sofia/external/nobody(a)213.166.5.133 [BREAK] 2009-11-21 22:07:15.676936 [DEBUG] switch_core_state_machine.c:398 (sofia/external/nobody(a)213.166.5.133) Running State Change CS_INIT 2009-11-21 22:07:15.676936 [DEBUG] switch_core_state_machine.c:481 (sofia/external/nobody(a)213.166.5.133) State INIT 2009-11-21 22:07:15.676936 [DEBUG] mod_sofia.c:83 sofia/external/nobody(a)213.166.5.133 SOFIA INIT 2009-11-21 22:07:15.676936 [DEBUG] mod_sofia.c:111 (sofia/external/nobody(a)213.166.5.133) State Change CS_INIT -> CS_ROUTING 2009-11-21 22:07:15.676936 [DEBUG] switch_core_session.c:932 Send signal sofia/external/nobody(a)213.166.5.133 [BREAK] 2009-11-21 22:07:15.676936 [DEBUG] switch_core_state_machine.c:481 (sofia/external/nobody(a)213.166.5.133) State INIT going to sleep 2009-11-21 22:07:15.676936 [DEBUG] switch_core_state_machine.c:398 (sofia/external/nobody(a)213.166.5.133) Running State Change CS_ROUTING 2009-11-21 22:07:15.676936 [DEBUG] switch_core_state_machine.c:484 (sofia/external/nobody(a)213.166.5.133) State ROUTING 2009-11-21 22:07:15.676936 [DEBUG] mod_sofia.c:130 sofia/external/nobody(a)213.166.5.133 SOFIA ROUTING 2009-11-21 22:07:15.676936 [DEBUG] switch_core_state_machine.c:78 sofia/external/nobody(a)213.166.5.133 Standard ROUTING 2009-11-21 22:07:15.696693 [INFO] mod_dialplan_xml.c:315 Processing anonymous->abeka in context public Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->unloop] continue=false Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (PASS) [unloop] ${unroll_loops}(true) =~ /^true$/ break=on-false Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (FAIL) [unloop] ${sip_looped_call}() =~ /^true$/ break=on-false Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->outside_call] continue=true Dialplan: sofia/external/nobody(a)213.166.5.133 Absolute Condition [outside_call] Dialplan: sofia/external/nobody(a)213.166.5.133 Action set(outside_call=true) Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->call_debug] continue=true Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (FAIL) [call_debug] ${call_debug}(false) =~ /^true$/ break=never Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->public_extensions] continue=false Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (FAIL) [public_extensions] destination_number(abeka) =~ /^(10[01][0-9])$/ break=on-false Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->public_did] continue=false Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (FAIL) [public_did] destination_number(abeka) =~ /^(5551212)$/ break=on-false Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->sip(a)sip.voipuser.org] continue=false Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (FAIL) [sip(a)sip.voipuser.org] destination_number(abeka) =~ /08715042951/ break=on-false Dialplan: sofia/external/nobody(a)213.166.5.133 parsing [public->Inbound-abeka(a)sip.voipuser.org]] continue=false Dialplan: sofia/external/nobody(a)213.166.5.133 Regex (FAIL) [Inbound-abeka(a)sip.voipuser.org]] destination_number(abeka) =~ /[08444846450]/ break=on-false 2009-11-21 22:07:15.704513 [DEBUG] switch_core_state_machine.c:114 (sofia/external/nobody(a)213.166.5.133) State Change CS_ROUTING -> CS_EXECUTE 2009-11-21 22:07:15.704513 [DEBUG] switch_core_session.c:932 Send signal sofia/external/nobody(a)213.166.5.133 [BREAK] 2009-11-21 22:07:15.704513 [DEBUG] switch_core_state_machine.c:484 (sofia/external/nobody(a)213.166.5.133) State ROUTING going to sleep 2009-11-21 22:07:15.704513 [DEBUG] switch_core_state_machine.c:398 (sofia/external/nobody(a)213.166.5.133) Running State Change CS_EXECUTE 2009-11-21 22:07:15.704513 [DEBUG] switch_core_state_machine.c:491 (sofia/external/nobody(a)213.166.5.133) State EXECUTE 2009-11-21 22:07:15.706658 [DEBUG] mod_sofia.c:173 sofia/external/nobody(a)213.166.5.133 SOFIA EXECUTE 2009-11-21 22:07:15.706658 [DEBUG] switch_core_state_machine.c:151 sofia/external/nobody(a)213.166.5.133 Standard EXECUTE EXECUTE sofia/external/nobody(a)213.166.5.133 set(outside_call=true) 2009-11-21 22:07:15.728613 [DEBUG] mod_dptools.c:748 sofia/external/nobody(a)213.166.5.133 SET [outside_call]=[true] 2009-11-21 22:07:15.728613 [NOTICE] switch_core_state_machine.c:179 Hangup sofia/external/nobody(a)213.166.5.133 [CS_EXECUTE] [NORMAL_CLEARING] 2009-11-21 22:07:15.728613 [DEBUG] switch_channel.c:1683 Send signal sofia/external/nobody(a)213.166.5.133 [KILL] 2009-11-21 22:07:15.728613 [DEBUG] switch_core_session.c:932 Send signal sofia/external/nobody(a)213.166.5.133 [BREAK] 2009-11-21 22:07:15.728613 [DEBUG] switch_core_state_machine.c:491 (sofia/external/nobody(a)213.166.5.133) State EXECUTE going to sleep 2009-11-21 22:07:15.728613 [DEBUG] switch_core_state_machine.c:398 (sofia/external/nobody(a)213.166.5.133) Running State Change CS_HANGUP 2009-11-21 22:07:15.735830 [DEBUG] switch_core_state_machine.c:434 (sofia/external/nobody(a)213.166.5.133) State HANGUP 2009-11-21 22:07:15.735830 [DEBUG] mod_sofia.c:338 Channel sofia/external/nobody(a)213.166.5.133 hanging up, cause: NORMAL_CLEARING 2009-11-21 22:07:15.737680 [DEBUG] mod_sofia.c:417 Responding to INVITE with: 480 2009-11-21 22:07:15.741149 [DEBUG] switch_core_state_machine.c:46 sofia/external/nobody(a)213.166.5.133 Standard HANGUP, cause: NORMAL_CLEARING 2009-11-21 22:07:15.741149 [DEBUG] switch_core_state_machine.c:434 (sofia/external/nobody(a)213.166.5.133) State HANGUP going to sleep 2009-11-21 22:07:15.742930 [DEBUG] switch_core_state_machine.c:476 (sofia/external/nobody(a)213.166.5.133) State Change CS_HANGUP -> CS_REPORTING 2009-11-21 22:07:15.742930 [DEBUG] switch_core_session.c:932 Send signal sofia/external/nobody(a)213.166.5.133 [BREAK] 2009-11-21 22:07:15.744587 [DEBUG] switch_core_state_machine.c:398 (sofia/external/nobody(a)213.166.5.133) Running State Change CS_REPORTING 2009-11-21 22:07:15.744587 [DEBUG] switch_core_state_machine.c:612 (sofia/external/nobody(a)213.166.5.133) State REPORTING 2009-11-21 22:07:15.800497 [DEBUG] switch_core_state_machine.c:53 sofia/external/nobody(a)213.166.5.133 Standard REPORTING, cause: NORMAL_CLEARING 2009-11-21 22:07:15.800497 [DEBUG] switch_core_state_machine.c:612 (sofia/external/nobody(a)213.166.5.133) State REPORTING going to sleep 2009-11-21 22:07:15.800497 [DEBUG] switch_core_state_machine.c:411 (sofia/external/nobody(a)213.166.5.133) State Change CS_REPORTING -> CS_DESTROY 2009-11-21 22:07:15.800497 [DEBUG] switch_core_session.c:1068 Session 2 (sofia/external/nobody(a)213.166.5.133) Locked, Waiting on external entities 2009-11-21 22:07:15.800497 [NOTICE] switch_core_session.c:1086 Session 2 (sofia/external/nobody(a)213.166.5.133) Ended 2009-11-21 22:07:15.800497 [NOTICE] switch_core_session.c:1088 Close Channel sofia/external/nobody(a)213.166.5.133 [CS_DESTROY] 2009-11-21 22:07:15.802636 [DEBUG] switch_core_state_machine.c:564 (sofia/external/nobody(a)213.166.5.133) State DESTROY 2009-11-21 22:07:15.802636 [DEBUG] mod_sofia.c:255 sofia/external/nobody(a)213.166.5.133 SOFIA DESTROY 2009-11-21 22:07:15.802636 [DEBUG] switch_core_state_machine.c:60 sofia/external/nobody(a)213.166.5.133 Standard DESTROY 2009-11-21 22:07:15.802636 [DEBUG] switch_core_state_machine.c:564 (sofia/external/nobody(a)213.166.5.133) State DESTROY going to sleep

4 6

Requesting testing.
by Michael Jerris 26 Nov '09

26 Nov '09

I have done quite a few changes to the build system and correcting build problems and other platform specific problems the last few days. Could everyone on the list please take a little time out of their day and do a clean fresh svn trunk checkout of FreeSWITCH and do a full build and report any errors you encounter (if not already reported) to http://jira.freeswitch.org. We have fixed things for many platforms including bsd, solaris, linux, and especially issues on OS X. Please try these out to make sure all works. Thanks Mike

3 3

passive recording
by Imthiyaz Ahmed 26 Nov '09

26 Nov '09

hi is it possibe to enable passive recording in sangoma tdm interface in feeswich. pls advice Best Regards G.Imthiyaz Ahmed

4 6

Precompiled Windows Binaries
by Dave Stevenson 26 Nov '09

26 Nov '09

Hi, I have read the Docs on the Wiki (http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :- LATEST_SVN_15106 - 6 Bytes freeswitch-1.0.4.exe - 42 Megabytes freeswitch.exe - 32 Megabytes I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ? Could someone who knows FreeSwitch under windows help me understand the two files please ? I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ? regards Dave

11 27

ESL command completion
by Josh Rivers 26 Nov '09

26 Nov '09

Is there a way of determining if a call-command sent to a session via ESL has completed? Is there a return event which is always fired? Is there a identifier I can use to verify that the return event matches my command? Thanks, Josh

2 1

Handling the 302 Moved Temporarily response from JavaScript
by John Platts 26 Nov '09

26 Nov '09

I have considered writing JavaScript code to bridge two calls together. However, I would like to perform custom handling of the 302 Moved Temporarily response. How do I handle the 302 Moved Temporarily response if I use JavaScript? _________________________________________________________________ Bing brings you maps, menus, and reviews organized in one place. http://www.bing.com/search?q=restaurants&form=MFESRP&publ=WLHMTAG&crea=TEXT…

5 7

remote_media_ip variable not set
by Juan Backson 25 Nov '09

25 Nov '09

Hi, I tried to use the variable remote_media_ip from within dialplan, but it is not returning anything. Does anyone know when this variable gets set and how to have this variable to be set as soon as an INVITE hit freeswitch? Thanks, jb

4 4

Grandstream gateways
by Samuel Mukoti 25 Nov '09

25 Nov '09

Hi all, I'm wanting to try out a my first large scale setup at the office, 200 extensions and 24 POTS incoming, also a T1 line once the telco guys are ready. I wanted assistance with choosing the most appropriate hardware. We already have about 150 analogue phones, and I was wondering what's best? A couple of grandstream FXS GXW4024? Also for my POTS lines, gxw4108 FXO gateway or is it better to buy a sangoma or digium card? The best voice quality is paramount. Lastly for T1 what cards are recommeded, I was also proposing to use a Dell T116 Quad core intel i7 8G DRAM, would that perform? Or do I need hardware transcoding? Thank you, Sam Twitter: twitter.com/samuelmukoti On 25 Nov,2009, at 8:05 PM, freeswitch-users-request(a)lists.freeswitch.org wrote: > Send FreeSWITCH-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > > You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FreeSWITCH-users digest..." > > > Today's Topics: > > 1. Re: mod_conference kick to abort invitations (Michael Jerris) > 2. Re: Handling the 302 Moved Temporarily response from > JavaScript (Michael Jerris) > 3. Re: No NOTIFY MWI when registering via proxy. (Brian West) > 4. Re: remote_media_ip variable not set (Michael Jerris) > 5. Re: How to find whether the destination extension supports > encryption (Michael Jerris) > 6. Re: Bypass_media and re_invite (srinivasula reddy) > 7. Re: Handling the 302 Moved Temporarily response from > JavaScript (Stephen Crosby) > 8. Re: Handling the 302 Moved Temporarily response from > JavaScript (Tihomir Culjaga) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 25 Nov 2009 12:44:46 -0500 > From: Michael Jerris <mike(a)jerris.com> > Subject: Re: [Freeswitch-users] mod_conference kick to abort > invitations > To: freeswitch-users(a)lists.freeswitch.org > Message-ID: <1CCC981C-9F4A-4D97-ACEA-A6DFB906C32B(a)jerris.com> > Content-Type: text/plain; charset="windows-1252" > > Its a feature we don't have, patches welcome. > > Mike > > On Nov 24, 2009, at 5:35 PM, Jan Thiemo Fricke wrote: > >> Hi members, >> I?m controlling freeswitch with the conference module via xmlrpc. >> >> Is it desired that the kick command can only kick users that are >> connected to the conference? >> Is there no chance abort an invitation? >> The kick command has no effect until the person I invited with the >> dial command is connected. > >

4 3