Hi, I have read the Docs on the Wiki (http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :- LATEST_SVN_15106 - 6 Bytes freeswitch-1.0.4.exe - 42 Megabytes freeswitch.exe - 32 Megabytes I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ? Could someone who knows FreeSwitch under windows help me understand the two files please ? I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ? regards Dave
Hi Dave, These are supported by "Carlos Talbot" . They also include Freepbx v3 Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot. There should be no problems installing the new version allthough best to just try and see! Not sure why the newest one is from October 7th. Jeff Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html Sent from the freeswitch-users mailing list archive at Nabble.com.
Jeff, thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play. You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ? I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ? When I start FreeSwitch, it does not automatically load the WAMPServer. When I start WAMPServer manually, and open up localhost (127.0.0.1) in a web browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects. When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway. So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ? regards Dave ----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best to just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Dave, Carlos can probably be a better help here too but yes Freepbx v3 is a web gui that is under heavy development - it probably is not yet ready for production but looks very promising! you can navigate to http://127.0.0.1/freepbx-v3/index.php/installer.html and restart the installer for freepbx if you want to experiment with it. The base FreeSWITCH installer does install and work well with windows and is quite easy to learn and configure. Their is a lot to learn though :) Regards, Jeff Dave Stevenson wrote:
Jeff,
thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
When I start WAMPServer manually, and open up localhost (127.0.0.1) in a web browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
regards Dave
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best to just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3940700.html Sent from the freeswitch-users mailing list archive at Nabble.com.
On Tue, Nov 3, 2009 at 11:27 AM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Jeff,
thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play.
I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
Yes, it's still in development phase and as such not ready for production use.
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
Freeswitch and WAMPServer are independant of each other. WAMPServer is
bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX. When I start WAMPServer manually, and open up localhost (127.0.0.1) in a web
browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3 regards, Carlos
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best to just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (
http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries)
but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Carlos, very cool that the x64 version is included now! Hopefully this will get more people using the x64 version under Windows! Regards, Jeff Carlos Talbot wrote:
On Tue, Nov 3, 2009 at 11:27 AM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Jeff,
thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play.
I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
Yes, it's still in development phase and as such not ready for production use.
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
Freeswitch and WAMPServer are independant of each other. WAMPServer is
bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX.
When I start WAMPServer manually, and open up localhost (127.0.0.1) in a web
browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3
regards,
Carlos
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best
to
just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (
http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries)
but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context:
http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html
Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3946039.html Sent from the freeswitch-users mailing list archive at Nabble.com.
On Wed, Nov 4, 2009 at 4:43 PM, Jeff Lenk <jlenk@frontiernet.net> wrote:
very cool that the x64 version is included now! Hopefully this will get more people using the x64 version under Windows!
...and will get more people using the x64 version of Windows! ;) -gm
Regards, Jeff
Carlos Talbot wrote:
On Tue, Nov 3, 2009 at 11:27 AM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Jeff,
thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play.
I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
Yes, it's still in development phase and as such not ready for production use.
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
Freeswitch and WAMPServer are independant of each other. WAMPServer is
bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX.
When I start WAMPServer manually, and open up localhost (127.0.0.1) in a web
browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3
regards,
Carlos
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best
to
just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (
http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries)
but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context:
http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html
Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3946039.html Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Brian West wrote:
I looked out my window... but I didn't see pigs flying... did I miss something! :P
/b
On Nov 4, 2009, at 11:22 AM, Giovanni Maruzzelli wrote:
...and will get more people using the x64 version of Windows! ;)
-gm
When their own commercials say that there old software is prone to crashing and hangs, why should I trust there "new" software? -- JohnM
Hi Carlos, thanks a lot for the reply on the Windows stuff - and for doing the pre-compile ! It saves me from having to do that myself while I'm busy just trying to learn FreeSwitch - not an easy task in itself, well, not for me anyway !. As much as a GUI would make working with FS easier, I think I'll keep away from FreePBX at the moment, I'm liable just to get myself more confused and break what I have working. I'll wait for a "Production Ready" version before I mess with this again I think. Just one clarification then, am I right in thinking that, after I have installed a release version of FS, if I then install one of the SVNs over it, it will keep all configuration etc. in tact, i.e., I won't lose anything that I've changed in the conf files etc? Regards Dave ----- Original Message ----- From: Carlos Talbot To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 2:51 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries On Tue, Nov 3, 2009 at 11:27 AM, Dave Stevenson <stevendt@primrosebank.net> wrote: Jeff, thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play. I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite. You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ? Yes, it's still in development phase and as such not ready for production use. I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ? When I start FreeSwitch, it does not automatically load the WAMPServer. Freeswitch and WAMPServer are independant of each other. WAMPServer is bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX. When I start WAMPServer manually, and open up localhost (127.0.0.1) in a web browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects. If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop. When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway. So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ? No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3 regards, Carlos ----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries > > Hi Dave, > > These are supported by "Carlos Talbot" . They also include Freepbx v3 > > Just as you said freeswitch-1.0.4.exe is the tagged release and > freeswitch.exe is a newer svn snapshot. > > There should be no problems installing the new version allthough best to > just try and see! > > Not sure why the newest one is from October 7th. > > Jeff > > > Dave Stevenson wrote: >> >> Hi, >> >> I have read the Docs on the Wiki >> (http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) >> but am still not sure of what the different Windows install files are. >> Currently, the Windows Installer directory contains :- >> >> LATEST_SVN_15106 - 6 Bytes >> >> freeswitch-1.0.4.exe - 42 Megabytes >> >> freeswitch.exe - 32 Megabytes >> >> I have installed the freeswitch-1.0.4.exe file which is dated 3rd >> September. The freeswitch.exe file is dated 7th October and think that it >> contains the minor updates since 3rd September ? >> >> Could someone who knows FreeSwitch under windows help me understand the >> two files please ? >> >> I chickened out of running the later exe in case it did something to the >> running install of FreeSwitch 1.0.4, is it safe to run the newer exe with >> the old one already installed ? >> What will it actually do ? >> >> regards >> Dave >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > -- > View this message in context: > http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html > Sent from the freeswitch-users mailing list archive at Nabble.com. > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :- "[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.." Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" ! Does anyone know of a fix in the pipeline, or am I sc***ed already ? Regards Dave
On Wed, Nov 4, 2009 at 10:03 AM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Hi,
I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :-
"[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.."
Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" !
Does anyone know of a fix in the pipeline, or am I sc***ed already ?
The cynical among us will say that you were hosed the moment you paid for a Linksys device. :) It's very sad but the FS devs find this kind of thing all the time. They've literally got all sorts of checks in the code to make sure that devices aren't saying one thing and doing something else. Cisco is not the only one to do stupid things like this. In any case, just be aware of it. If you want suggestions then list to the others here who can offer their experiences with various devices they have in production. -MC
Michael et al - and specifically, the FS Developers, this is all the more annoying given the fact that the SPA-3102 was bought specifically to run with FreeSwitch following a recommendation here in the UK. It was just unwrapped this afternoon :-( (http://robsmart.co.uk/2009/06/02/freeswitch_linksys3102/). I am setting up a VOIP system at home, and this device sounded like the ideal gateway to the PSTN. What does the error message actually mean - is this device a non-starter or are there work-arounds or fixes to the code in progress ? Surely the device can't be as "broken" as the message - or am I just being too hopeful ? Regards Dave ----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 6:23 PM Subject: Re: [Freeswitch-users] Gateway Error On Wed, Nov 4, 2009 at 10:03 AM, Dave Stevenson <stevendt@primrosebank.net> wrote: Hi, I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :- "[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.." Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" ! Does anyone know of a fix in the pipeline, or am I sc***ed already ? The cynical among us will say that you were hosed the moment you paid for a Linksys device. :) It's very sad but the FS devs find this kind of thing all the time. They've literally got all sorts of checks in the code to make sure that devices aren't saying one thing and doing something else. Cisco is not the only one to do stupid things like this. In any case, just be aware of it. If you want suggestions then list to the others here who can offer their experiences with various devices they have in production. -MC ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It means you need to go change the setting from the broken defaults, thats all. Mike On Nov 4, 2009, at 1:48 PM, Dave Stevenson wrote:
Michael et al - and specifically, the FS Developers,
this is all the more annoying given the fact that the SPA-3102 was bought specifically to run with FreeSwitch following a recommendation here in the UK. It was just unwrapped this afternoon :-(
(http://robsmart.co.uk/2009/06/02/freeswitch_linksys3102/).
I am setting up a VOIP system at home, and this device sounded like the ideal gateway to the PSTN.
What does the error message actually mean - is this device a non- starter or are there work-arounds or fixes to the code in progress ?
Surely the device can't be as "broken" as the message - or am I just being too hopeful ?
Regards Dave
----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 6:23 PM Subject: Re: [Freeswitch-users] Gateway Error
On Wed, Nov 4, 2009 at 10:03 AM, Dave Stevenson <stevendt@primrosebank.net
wrote: Hi,
I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :-
"[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.."
Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" !
Does anyone know of a fix in the pipeline, or am I sc***ed already ?
The cynical among us will say that you were hosed the moment you paid for a Linksys device. :) It's very sad but the FS devs find this kind of thing all the time. They've literally got all sorts of checks in the code to make sure that devices aren't saying one thing and doing something else. Cisco is not the only one to do stupid things like this. In any case, just be aware of it.
If you want suggestions then list to the others here who can offer their experiences with various devices they have in production. -MC
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
Phew ! Thanks Mike, I was very worried there. Now, if I just knew which were the "broken defaults", I'd know where to go next :-) Regards Dave ----- Original Message ----- From: Michael Jerris To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 7:36 PM Subject: Re: [Freeswitch-users] Gateway Error It means you need to go change the setting from the broken defaults, thats all. Mike On Nov 4, 2009, at 1:48 PM, Dave Stevenson wrote: Michael et al - and specifically, the FS Developers, this is all the more annoying given the fact that the SPA-3102 was bought specifically to run with FreeSwitch following a recommendation here in the UK. It was just unwrapped this afternoon :-( (http://robsmart.co.uk/2009/06/02/freeswitch_linksys3102/). I am setting up a VOIP system at home, and this device sounded like the ideal gateway to the PSTN. What does the error message actually mean - is this device a non-starter or are there work-arounds or fixes to the code in progress ? Surely the device can't be as "broken" as the message - or am I just being too hopeful ? Regards Dave ----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 6:23 PM Subject: Re: [Freeswitch-users] Gateway Error On Wed, Nov 4, 2009 at 10:03 AM, Dave Stevenson <stevendt@primrosebank.net> wrote: Hi, I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :- "[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.." Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" ! Does anyone know of a fix in the pipeline, or am I sc***ed already ? The cynical among us will say that you were hosed the moment you paid for a Linksys device. :) It's very sad but the FS devs find this kind of thing all the time. They've literally got all sorts of checks in the code to make sure that devices aren't saying one thing and doing something else. Cisco is not the only one to do stupid things like this. In any case, just be aware of it. If you want suggestions then list to the others here who can offer their experiences with various devices they have in production. -MC -------------------------------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
http://wiki.freeswitch.org/wiki/SPA3102_FreeSwitch_HowTo On Wed, Nov 4, 2009 at 2:49 PM, Dave Stevenson <stevendt@primrosebank.net> wrote:
Phew !
Thanks Mike, I was very worried there.
Now, if I just knew which were the "broken defaults", I'd know where to go next :-)
Regards Dave
----- Original Message ----- From: Michael Jerris To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 7:36 PM Subject: Re: [Freeswitch-users] Gateway Error It means you need to go change the setting from the broken defaults, thats all. Mike On Nov 4, 2009, at 1:48 PM, Dave Stevenson wrote:
Michael et al - and specifically, the FS Developers,
this is all the more annoying given the fact that the SPA-3102 was bought specifically to run with FreeSwitch following a recommendation here in the UK. It was just unwrapped this afternoon :-(
(http://robsmart.co.uk/2009/06/02/freeswitch_linksys3102/).
I am setting up a VOIP system at home, and this device sounded like the ideal gateway to the PSTN.
What does the error message actually mean - is this device a non-starter or are there work-arounds or fixes to the code in progress ?
Surely the device can't be as "broken" as the message - or am I just being too hopeful ?
Regards Dave
----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 6:23 PM Subject: Re: [Freeswitch-users] Gateway Error
On Wed, Nov 4, 2009 at 10:03 AM, Dave Stevenson <stevendt@primrosebank.net> wrote:
Hi,
I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :-
"[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.."
Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" !
Does anyone know of a fix in the pipeline, or am I sc***ed already ?
The cynical among us will say that you were hosed the moment you paid for a Linksys device. :) It's very sad but the FS devs find this kind of thing all the time. They've literally got all sorts of checks in the code to make sure that devices aren't saying one thing and doing something else. Cisco is not the only one to do stupid things like this. In any case, just be aware of it.
If you want suggestions then list to the others here who can offer their experiences with various devices they have in production. -MC
________________________________ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner http://www.astlinux.org http://blog.krisk.org http://www.star2star.com http://www.submityoursip.com http://www.voalte.com
Kristian, thanks very much ! After trawling the internet, I had just found the Linksys "RTP Packet Size" and worked out that it was the "ptime" parameter that FreeSwitch flagged as a problem. I had literally just changed that the very minute your post came in ! I'm off not to read that Wiki that looks like it will tell me everything else that I need to know on the SPA-3012, thanks and best regards Dave ----- Original Message ----- From: "Kristian Kielhofner" <kristian.kielhofner@gmail.com> To: <freeswitch-users@lists.freeswitch.org> Sent: Wednesday, November 04, 2009 8:57 PM Subject: Re: [Freeswitch-users] Gateway Error http://wiki.freeswitch.org/wiki/SPA3102_FreeSwitch_HowTo On Wed, Nov 4, 2009 at 2:49 PM, Dave Stevenson <stevendt@primrosebank.net> wrote:
Phew !
Thanks Mike, I was very worried there.
Now, if I just knew which were the "broken defaults", I'd know where to go next :-)
Regards Dave
----- Original Message ----- From: Michael Jerris To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 7:36 PM Subject: Re: [Freeswitch-users] Gateway Error It means you need to go change the setting from the broken defaults, thats all. Mike On Nov 4, 2009, at 1:48 PM, Dave Stevenson wrote:
Michael et al - and specifically, the FS Developers,
this is all the more annoying given the fact that the SPA-3102 was bought specifically to run with FreeSwitch following a recommendation here in the UK. It was just unwrapped this afternoon :-(
(http://robsmart.co.uk/2009/06/02/freeswitch_linksys3102/).
I am setting up a VOIP system at home, and this device sounded like the ideal gateway to the PSTN.
What does the error message actually mean - is this device a non-starter or are there work-arounds or fixes to the code in progress ?
Surely the device can't be as "broken" as the message - or am I just being too hopeful ?
Regards Dave
----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, November 04, 2009 6:23 PM Subject: Re: [Freeswitch-users] Gateway Error
On Wed, Nov 4, 2009 at 10:03 AM, Dave Stevenson <stevendt@primrosebank.net> wrote:
Hi,
I am trying to set up FreeSwitch with a new Linksys SPA-3102 Voice Gateway and am seeing the following error :-
"[WARNING] mod_sofia.c:810 We were told to use ptime 30 but what they meant to say was 20 This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sigura aka Cisco ShoreTel Sonus/L3 We will try to fix it but some of the devices on this list are so broken who know what will happen.."
Having just bought the Gateway specifically for FS, that was a bit of a "rude awakening" !
Does anyone know of a fix in the pipeline, or am I sc***ed already ?
The cynical among us will say that you were hosed the moment you paid for a Linksys device. :) It's very sad but the FS devs find this kind of thing all the time. They've literally got all sorts of checks in the code to make sure that devices aren't saying one thing and doing something else. Cisco is not the only one to do stupid things like this. In any case, just be aware of it.
If you want suggestions then list to the others here who can offer their experiences with various devices they have in production. -MC
________________________________ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner http://www.astlinux.org http://blog.krisk.org http://www.star2star.com http://www.submityoursip.com http://www.voalte.com _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I am trying to follow the configuration give in the "SPA3102 FreeSwitch HowTo". When I create the 00_spa3102.xml file, FreeSwitch won't load. If I rename the file (to, say .txt) then rename it to an xml once FreeSwitch is up and do a "reloadxml" command, I get an error flagged :- +OK [[error near line 3379]: missing >] I'm pretty sure the error must be in the 00_spa3102.xml file, but I can't see where the error might be - it looks identical to that on the Wiki page ? regards Dave
Look at this line on the freeswitch.fsxml and it will tell you exactly where the problem is. Beware that nested comments are not allowed in XML. -- JM On Wed, Nov 4, 2009 at 9:59 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
I am trying to follow the configuration give in the "SPA3102 FreeSwitch HowTo".
When I create the 00_spa3102.xml file, FreeSwitch won't load. If I rename the file (to, say .txt) then rename it to an xml once FreeSwitch is up and do a "reloadxml" command, I get an error flagged :-
+OK [[error near line 3379]: missing >]
I'm pretty sure the error must be in the 00_spa3102.xml file, but I can't see where the error might be - it looks identical to that on the Wiki page ?
regards Dave
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FYI, the file JM mentioned is actually in freeswitch/log directory. :) The file "freeswitch.fsxml" is the monster file that has all of the individual XML files included. When you got find line 3379 you'll most likely see a missing ">" char on line 3378 or near there. You'll have a few more of these before you're an expert, I guarantee it. :D It's frequently just a typo. -MC 2009/11/4 João Mesquita <jmesquita@freeswitch.org>
Look at this line on the freeswitch.fsxml and it will tell you exactly where the problem is.
Beware that nested comments are not allowed in XML.
-- JM
Joao & Michael, thanks a lot for the pointers to the combined xml file. Nothing as forgivable as a typo - I'm just dumb ! I had not changed the entry for destination number from the sample file :- <include> <extension name="To PSTN"> <condition field="destination_number" expression="(.*)"> <action application="bridge" data="sofia/internal/${destination_number}@[IP address of SPA3102]:5061" /> </condition> </extension> </include> To use the actual destination number - duh ! - I had changed the IP address, but not noticed the other required field :-( Still, with your help, I've got it now Regards Dave ----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Thursday, November 05, 2009 12:27 AM Subject: Re: [Freeswitch-users] SPA3102 FreeSwitch HowTo FYI, the file JM mentioned is actually in freeswitch/log directory. :) The file "freeswitch.fsxml" is the monster file that has all of the individual XML files included. When you got find line 3379 you'll most likely see a missing ">" char on line 3378 or near there. You'll have a few more of these before you're an expert, I guarantee it. :D It's frequently just a typo. -MC 2009/11/4 João Mesquita <jmesquita@freeswitch.org> Look at this line on the freeswitch.fsxml and it will tell you exactly where the problem is. Beware that nested comments are not allowed in XML. -- JM ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I am having some (limited) success with setting up my system ! I have got an SPA-3102 connected and working after a fashion, but I don't understand how to move on. I am setting up an internal only VOIP system - it will (hopefully) use the SPA3102 to take calls from the PSTN and put them through FreeSwitch to transfer them to VOIP. The gateway will work in reverse, taking internal VOIP calls and passing them to the PSTN. So far, based on the "SPA3102 FreeSwitch HowTo Wiki" and some related information, I can get FreeSwitch to see the incoming call and pass it to the extention defined in the SPA3102 Dialplan, i.e., it rings extension 1001. I can make outgoing calls by dialing the PSTN Extension (1000) and then manually entering the PSTN number. I have an "out of the box" FreeSwitch installation, including extensions, dialplans etc. As well as being new to FreeSwitch, all of this phone stuff is new to me - Dialplans so far look like a black art ! My questions are :- Making outgoing calls. Do I need to enter 1000 everytime I make a call - I'm thinking that I should be able to setup a dialplan which knows that if I'm not entering an internal (VOIP) number (format say, xxxx), it should automatically reroute to the SPA3102 through extension 1000? I probably want to set it up so that the user maybe has to dial a number, say 9, for the outside line, but not the 1000 number. When I try appending a "real" number to 1000, I get a "CALL_REJECTED" error in the console and a "bad number" tone, I suspect that the tone is coming from FreeSwitch and not the SPA3102 - would that be right ? Receiving Incoming Calls As shown in the Wiki, the SPA3102 rings phone extension 1001. I want all internal VOIP phones to ring and be available for answer from all phones - again, I think this should be possible, but I have no idea how to achieve it. I'm guessing that I'd create a "dummy" extension that the SPA3102 would call, which a dialplan would then distribute to a group of VOIP extensions ? Any help/pointers would be really appreciated. I will probably try IRC later, but with the time difference, it's a bit awkward for me (I'm in the UK) - I can't face many more late nights ! Regards Dave
Hi, I am having some (limited) success with setting up my system ! I have got an SPA-3102 connected and working after a fashion, but I don't understand how to move on. I am setting up an internal only VOIP system - it will (hopefully) use the SPA3102 to take calls from the PSTN and put them through FreeSwitch to transfer them to VOIP. The gateway will work in reverse, taking internal VOIP calls and passing them to the PSTN. So far, based on the "SPA3102 FreeSwitch HowTo Wiki" and some related information, I can get FreeSwitch to see the incoming call and pass it to the extention defined in the SPA3102 Dialplan, i.e., it rings extension 1001. I can make outgoing calls by dialing the PSTN Extension (1000) and then manually entering the PSTN number. I have an "out of the box" FreeSwitch installation, including extensions, dialplans etc. As well as being new to FreeSwitch, all of this phone stuff is new to me - Dialplans so far look like a black art ! My questions are :- Making outgoing calls. Do I need to enter 1000 everytime I make a call - I'm thinking that I should be able to setup a dialplan which knows that if I'm not entering an internal (VOIP) number (format say, xxxx), it should automatically reroute to the SPA3102 through extension 1000? I probably want to set it up so that the user maybe has to dial a number, say 9, for the outside line, but not the 1000 number. When I try appending a "real" number to 1000, I get a "CALL_REJECTED" error in the console and a "bad number" tone, I suspect that the tone is coming from FreeSwitch and not the SPA3102 - would that be right ? Receiving Incoming Calls As shown in the Wiki, the SPA3102 rings phone extension 1001. I want all internal VOIP phones to ring and be available for answer from all phones - again, I think this should be possible, but I have no idea how to achieve it. I'm guessing that I'd create a "dummy" extension that the SPA3102 would call, which a dialplan would then distribute to a group of VOIP extensions ? Any help/pointers would be really appreciated. I will probably try IRC later, but with the time difference, it's a bit awkward for me (I'm in the UK) - I can't face many more late nights ! Regards Dave
Follow up to previous post..... regarding making outgoing calls. I ***think*** that I have configured a dialplan that allows the user to dial out but the requests seem to be getting rejected by the SPA3102. I can dial 0 and the FreeSwitch attendant will connect to the PSTN line (FreeSwitch reports that the call has been answered). Similarly, I can dial 1000 - the SPA3102 extension number with similar results. However, if a try to dial an external number, the gateway rejects the call. I have captured some of the debug log but the info in there is way over my head, can anyone help me understand what it's telling me please ? regards Dave ----- Original Message ----- From: Dave Stevenson To: freeswitch-users@lists.freeswitch.org Sent: Friday, November 06, 2009 2:20 PM Subject: [Freeswitch-users] SPA3102 FreeSwitch HowTo Wiki Hi, I am having some (limited) success with setting up my system ! I have got an SPA-3102 connected and working after a fashion, but I don't understand how to move on. I am setting up an internal only VOIP system - it will (hopefully) use the SPA3102 to take calls from the PSTN and put them through FreeSwitch to transfer them to VOIP. The gateway will work in reverse, taking internal VOIP calls and passing them to the PSTN. So far, based on the "SPA3102 FreeSwitch HowTo Wiki" and some related information, I can get FreeSwitch to see the incoming call and pass it to the extention defined in the SPA3102 Dialplan, i.e., it rings extension 1001. I can make outgoing calls by dialing the PSTN Extension (1000) and then manually entering the PSTN number. I have an "out of the box" FreeSwitch installation, including extensions, dialplans etc. As well as being new to FreeSwitch, all of this phone stuff is new to me - Dialplans so far look like a black art ! My questions are :- Making outgoing calls. Do I need to enter 1000 everytime I make a call - I'm thinking that I should be able to setup a dialplan which knows that if I'm not entering an internal (VOIP) number (format say, xxxx), it should automatically reroute to the SPA3102 through extension 1000? I probably want to set it up so that the user maybe has to dial a number, say 9, for the outside line, but not the 1000 number. When I try appending a "real" number to 1000, I get a "CALL_REJECTED" error in the console and a "bad number" tone, I suspect that the tone is coming from FreeSwitch and not the SPA3102 - would that be right ? Receiving Incoming Calls As shown in the Wiki, the SPA3102 rings phone extension 1001. I want all internal VOIP phones to ring and be available for answer from all phones - again, I think this should be possible, but I have no idea how to achieve it. I'm guessing that I'd create a "dummy" extension that the SPA3102 would call, which a dialplan would then distribute to a group of VOIP extensions ? Any help/pointers would be really appreciated. I will probably try IRC later, but with the time difference, it's a bit awkward for me (I'm in the UK) - I can't face many more late nights ! Regards Dave ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Two quick questions: which version of FreeSWITCH are you running? If you're not on the latest then I recommend getting SVN trunk or at the very least the latest prerelease. Second, can you capture the debug information and use pastebin? It makes it much easier for everyone to help you. http://pastebin.freeswitch.org. Also, this page might be helpful: http://wiki.freeswitch.org/wiki/Reporting_Bugs It has handy tips on collecting information and asking the community for assistance. -MC On Sat, Nov 7, 2009 at 6:42 AM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Follow up to previous post..... regarding making outgoing calls.
I ***think*** that I have configured a dialplan that allows the user to dial out but the requests seem to be getting rejected by the SPA3102.
I can dial 0 and the FreeSwitch attendant will connect to the PSTN line (FreeSwitch reports that the call has been answered). Similarly, I can dial 1000 - the SPA3102 extension number with similar results.
However, if a try to dial an external number, the gateway rejects the call.
I have captured some of the debug log but the info in there is way over my head, can anyone help me understand what it's telling me please ?
regards Dave
On Wed, Nov 4, 2009 at 1:49 PM, Dave Stevenson <stevendt@primrosebank.net>wrote:
Hi Carlos,
Just one clarification then, am I right in thinking that, after I have installed a release version of FS, if I then install one of the SVNs over it, it will keep all configuration etc. in tact, i.e., I won't lose anything that I've changed in the conf files etc?
Regards Dave
Hi Dave, Your best bet would be to keep 1.0.4 and SVN in separate installation directories since the SVN version will install default copies of the conf folder and overwrite your existing config. This is no different than your typical Windows App install file. You could just install SVN in a temp location and copy out all but the conf folder to your current 1.0.4 location. FYI, I just uploaded SVN 15355. regards, Carlos
----- Original Message ----- *From:* Carlos Talbot <carlos.talbot@gmail.com> *To:* freeswitch-users@lists.freeswitch.org *Sent:* Wednesday, November 04, 2009 2:51 PM *Subject:* Re: [Freeswitch-users] Precompiled Windows Binaries
On Tue, Nov 3, 2009 at 11:27 AM, Dave Stevenson <stevendt@primrosebank.net
wrote:
Jeff,
thanks a lot for the reply. I was a little confused by the fact that the "SVN Snapshot" was some 10MB smaller than the Full 1.0.4 file so worried that I might lose something. As you say though, think that I'll cross my fingers and try the updated release. I am running FreeSwitch on a test machine at the moment until the target hardware arrives - hopefully tomorrow, so I can afford to have a little play.
I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
Yes, it's still in development phase and as such not ready for production use.
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
Freeswitch and WAMPServer are independant of each other. WAMPServer is
bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX.
When I start WAMPServer manually, and open up localhost (127.0.0.1) in a
web browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3
regards,
Carlos
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best to just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (
http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries)
but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context:
http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html
Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Carlos, Do you have any documentation or scripts for your builds? I'm interested in having a working automated build and installer build process, and I'm curious if there's any work you've done that can make my job easier. :) Thanks, Josh On Wed, Nov 4, 2009 at 6:51 AM, Carlos Talbot <carlos.talbot@gmail.com>wrote:
I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
Yes, it's still in development phase and as such not ready for production use.
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
Freeswitch and WAMPServer are independant of each other. WAMPServer is
bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX.
When I start WAMPServer manually, and open up localhost (127.0.0.1) in a
web browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3
regards,
Carlos
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best to just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (
http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries)
but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context:
http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html
Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've just checked in the source files for the Inno Setup script I'm using to build the windows installer(svn 15681). That's about the extent of the documentation at this point. :) regards, Carlos On Wed, Nov 25, 2009 at 8:10 PM, Josh Rivers <josh@radianttiger.com> wrote:
Carlos,
Do you have any documentation or scripts for your builds? I'm interested in having a working automated build and installer build process, and I'm curious if there's any work you've done that can make my job easier. :)
Thanks, Josh
On Wed, Nov 4, 2009 at 6:51 AM, Carlos Talbot <carlos.talbot@gmail.com>wrote:
I usually try to update the svn file at least once a month. I have a new version ready that was compiled last night but am ironing out login issues with the FS dudes for upload access. Also, the SVN snapshot now includes binaries for 32 and 64 bit. It no longer includes flite though as the install file was approaching 80MB in size. I will revisit this later if others feel it important to include flite.
You mentioned FreePBX V3. I had been fumbling around trying to work out what this is and from what I've read, it seems to provide a GUI Front End for configuring FreeSwitch ?
Yes, it's still in development phase and as such not ready for production use.
I am guessing that while it has been installed with FreeSwitch, I then need to run the FreePBX Installer to update the FreePBX/FreeSwitch configuration on my hardware ?
When I start FreeSwitch, it does not automatically load the WAMPServer.
Freeswitch and WAMPServer are independant of each other. WAMPServer is
bundled in this install for the purpose of FreePBX as MySQL, Apache and PHP are all required components of FreePBX.
When I start WAMPServer manually, and open up localhost (127.0.0.1) in a
web browser, I can see the WampServer logo and various tools such as phpinfo() and phpmyadmin. FreePBX is there under Your Projects.
If you want to configure FreePBX you need to click on the FreePBX.url shortcut that gets created on your desktop.
When I opened this up the first time, it appeared to want to install FreePBX over FreeSwitch, I tried to abort this when it was going to overwrite some FreeSwitch conf files and I thought I'd better not go on until I had a better idea what was happening. I backed out of the FreePBX install and now I can't get the FreePBX or phpmyadmin pages up again (missing files) so it looks like I'm going to have to reinstall anyway.
So, for next time,am I right in thinking that I should proceed with running the FreePBX install from the WAMPServer menu ?
No, launch it from the shortcut as stated above. Unfortunately, at this time there is very little user documentation on configuring FreePBX. Here is the link to the developer's info: http://www.freepbx.org/v3
regards,
Carlos
----- Original Message ----- From: "Jeff Lenk" <jlenk@frontiernet.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 03, 2009 2:48 PM Subject: Re: [Freeswitch-users] Precompiled Windows Binaries
Hi Dave,
These are supported by "Carlos Talbot" . They also include Freepbx v3
Just as you said freeswitch-1.0.4.exe is the tagged release and freeswitch.exe is a newer svn snapshot.
There should be no problems installing the new version allthough best
to
just try and see!
Not sure why the newest one is from October 7th.
Jeff
Dave Stevenson wrote:
Hi,
I have read the Docs on the Wiki (
http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries)
but am still not sure of what the different Windows install files are. Currently, the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42 Megabytes
freeswitch.exe - 32 Megabytes
I have installed the freeswitch-1.0.4.exe file which is dated 3rd September. The freeswitch.exe file is dated 7th October and think that it contains the minor updates since 3rd September ?
Could someone who knows FreeSwitch under windows help me understand the two files please ?
I chickened out of running the later exe in case it did something to the running install of FreeSwitch 1.0.4, is it safe to run the newer exe with the old one already installed ? What will it actually do ?
regards Dave _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context:
http://n2.nabble.com/Precompiled-Windows-Binaries-tp3937943p3938887.html
Sent from the freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (11)
-
Brian West
-
Carlos Talbot
-
Dave Stevenson
-
Giovanni Maruzzelli
-
Jeff Lenk
-
John Millican
-
Josh Rivers
-
João Mesquita
-
Kristian Kielhofner
-
Michael Collins
-
Michael Jerris