- FreeSWITCH-users - FreeSWITCH Mailing Lists

really no installer for w2k anywhere?
by Pekka Kurki 11 Jan '10

11 Jan '10

all installer versions fail with missing getnameinfo/getaddressinfo support in w2k.

2 1

looking for supported hardware
by Holger von Rhein 10 Jan '10

10 Jan '10

Hi, I plan to set up a telephone system at home. At the moment I have just one analogue hardware phone connected to my DSL-Splitter. To build a system capable to be my telephone system, I have looked for a list of supported hardware by freeswitch, but I could not find one. :( Especial, I want to know which PCI(e)-Cards to connect an analogue hardware phone are well supported / recommended by freeswitch. Does http://www.asterisk.org/astdocs/node12.html also apply for freeswitch? On the other side, are there any features of an analogue modem, I have to pay attention for? Or will any Linux supported modem be okay to dial out? Thanks for any hint. Holger

2 1

Installing freeswitch on CentOS
by Saeed Ahmed 09 Jan '10

09 Jan '10

Hi, Since CentOS is recommend for FS but i can't see a CentOS specific installation guide on wiki as we have a separate guide for Ubuntu. Do we have similar guide like this one http://wiki.freeswitch.org/wiki/SBC_Setup* *actually its for debian but good thing is that it also explains which extra services should be stopped or removed for better performance. Do we have similar for CentOS? Thanks

8 15

Voicemail - Is it possible?
by Craig Smith 09 Jan '10

09 Jan '10

Hi! I have a legacy PBX, Mitel to be specific, and an ailing AVST voice mail system that I'm looking to replace with Freeswitch. I know I can toggle the MWI on or off for a particular extension on the Mitel by dialing a feature code plus extension. Is there a way to use voicemail so that I can turn on/off MWI based on the status of the mailbox. Turning the light on seems like it would be the easy part, shutting it off when all messages have been read has me perplexed. If I used MySQL, could I scan flags on messages in mailboxes to toggle my MWI? Thanks, Craig

2 1

Rewriting hangup causes
by Ahmed Naji 09 Jan '10

09 Jan '10

Dear All, I have a need to remap hangup causes returned to customers on one of our clusters. Is there an easy way of achieving this in FS ? Regards, Ahmed.

1 0

FAS detection with FS
by Ahmed Naji 09 Jan '10

09 Jan '10

Hi everyone, Was just wondering what/if anyone is doing any work on FAS detection and spoofed ring tones. Be great to discuss some ideas. Regards, Ahmed. -- Ahmed Naji

6 11

Need to fake ringback
by Nicolas Brenner 09 Jan '10

09 Jan '10

I'm trying to fake a ringback for leg1 of a two-legged call without success. I'm doing this with a JS script, originating one leg first, then the second and executing the bridge application on both afterwards. I would like to fake a ringback on the first call while they wait for the second call to connect. I tried originating the call and then setting the ringback (like the example here: http://wiki.freeswitch.org/wiki/Custom_Ring_Back_Tones) and I also tried setting the ringback in the originate command, but none of those worked. I even tried using the variable instant_ringback, but it didn't work either. This is the code for the first case: ostr = "{ignore_early_media=true,originate_timeout=90,hangup_after_bridge=false,medularis_uuid="+uuid+",c2c_call=true,api_call=true,leg=1}[leg_timeout="+timeout+"]sofia/gateway/mygw/123456789"; session1 = new Session(ostr); if (session1.ready()) { session1.execute("set","instant_ringback=%(2000,4000,440.0,480.0)"); } And this is the originate string for the second case: var stUsRing = "%(2000,4000,440,480)"; ostr = "{ignore_early_media=true,originate_timeout=90,hangup_after_bridge=false,ringback='"+stUsRing+"',medularis_uuid="+uuid+",c2c_call=true,api_call=true,leg=1}[leg_timeout="+timeout+"]sofia/gateway/mygw/123456789"; Thanks for your help! Nico

3 5

mod_xml_ldap compile error
by afshin afzali 09 Jan '10

09 Jan '10

Hi, I'm using CentOS 5.4 x86-64 and just mod_xml_ldap causes this compile error. I've found an exactly same issue in the list by Keith Laaks that responded by Patrick. Patrick says : I had the same issue and MikeJ (one of the core developers) looked at it. Conclusion was that it is an openldap issue and iirc the solution is to libtoolize libraries/liblutil/Makefile.in so that when running configure a Makefile with proper compiler flags is generated in libraries/liblutil/ My point is : 1) As I found in openldap 2.4.19, the package already is libtool support. if I try libtoolize on openldap package , then : You should update your `aclocal.m4' by running aclocal. Putting files in AC_CONFIG_AUX_DIR, `build'. libtoolize: `config.guess' exists: use `--force' to overwrite libtoolize: `config.sub' exists: use `--force' to overwrite libtoolize: `ltmain.sh' exists: use `--force' to overwrite 2) Anthony says : "CentOS 5.4 appears to have some bugs in the toolchain and libc" Is this issue because of those bugs? How I can workaround that? Regards, -- afshin making all mod_xml_ldap Creating mod_xml_ldap.so... /usr/bin/ld: /root/freeswitch-1.0.5-20100106-0400/libs/openldap-2.4.19/libraries/liblutil/liblutil.a(sasl.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC /root/freeswitch-1.0.5-20100106-0400/libs/openldap-2.4.19/libraries/liblutil/liblutil.a: could not read symbols: Bad value collect2: ld returned 1 exit status gcc -DWITH_OPENLDAP -DLDAP_DEPRECATED -I/root/freeswitch-1.0.5-20100106-0400/libs/openldap-2.4.19/include -I/root/freeswitch-1.0.5-20100106-0400/src/include -I/root/freeswitch-1.0.5-20100106-0400/src/include -I/root/freeswitch-1.0.5-20100106-0400/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -shared -o .libs/mod_xml_ldap.so -shared -Wl,-x .libs/mod_xml_ldap.o /root/freeswitch-1.0.5-20100106-0400/.libs/libfreeswitch.so -L/root/freeswitch-1.0.5-20100106-0400/libs/apr-util/xml/expat/lib /root/freeswitch-1.0.5-20100106-0400/libs/apr-util/xml/expat/lib/.libs/libexpat.a /root/freeswitch-1.0.5-20100106-0400/libs/apr/.libs/libapr-1.a -luuid -lrt -lcrypt -lpthread -L/root/freeswitch-1.0.5-20100106-0400/libs/srtp -L/usr/kerberos/lib64 -ldl -lz -lncurses /root/freeswitch-1.0.5-20100106-0400/libs/openldap-2.4.19/libraries/libldap_r/.libs/libldap_r.a -lsasl2 -lssl -lcrypto -pthread /root/freeswitch-1.0.5-20100106-0400/libs/openldap-2.4.19/libraries/liblber/.libs/liblber.a -lm -lresolv /root/freeswitch-1.0.5-20100106-0400/libs/openldap-2.4.19/libraries/liblutil/liblutil.a -Wl,--rpath -Wl,/usr/local/freeswitch/lib -Wl,--rpath -Wl,/usr/local/freeswitch/mod make[5]: *** [mod_xml_ldap.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_xml_ldap-all] Error 1 make[2]: *** [all-recursive] Error 1

1 0

rxfax ending dialplan
by Joseph L. Casale 09 Jan '10

09 Jan '10

Hey Guys, In my initial testing with an old version of fs, my dialplan with a system call after the rxfax app would execute, but now the dialplan ends at rxfax after it writes the file out. Anyone know what var is different by default now so I can allow this to continue on to hit the script and then end after? Thanks, jlc

2 2

IVR and TTS
by Jingwei Yang 09 Jan '10

09 Jan '10

Hi Guys, I need to implement a function using IVR and TTS. Here's the scenario. 1. User A calls in 2. FS plays a welcome message and directs A to press '1' to continue 3. FS detects A's number and finds A's address from the database and plays another piece of voice message including the address info just found I understand this logic can be implemented using javascript. However, in this scenario, the database is a remote one and the local js has no access to it. What I'm planning to do is write a Java program, talking to FS via ESL. Could someone please tell me what event FS will trigger after user A selects a certain option and how to inform the FS to continue the rest of IVR menu after finding the address? Thanks, -Jingwei

2 2