- FreeSWITCH-users - FreeSWITCH Mailing Lists

default-template
by FERNANDO VILLARROEL 26 Jan '10

26 Jan '10

Dear All. It´s possible define the default-template in each external gateways, like this: <include> <gateway name="foo"> <param name="username" value="foo"/> <param name="password" value="foo"/> <param name="realm" value="190.XXX.XX.XXX"/> <param name="register" value="false"/> <param name="context" value="public"/> <param name="default-template" value="sql1"/> </gateway> </include> <include> <gateway name="foo1"> <param name="username" value="foo1"/> <param name="password" value="foo1"/> <param name="realm" value="190.XXX.XX.YYY"/> <param name="register" value="false"/> <param name="context" value="public"/> <param name="default-template" value="sql2"/> </gateway> </include> Regards

1 0

sangoma_prid & freeswitch openzap - conflict
by Michal Zubáč 26 Jan '10

26 Jan '10

Hi. I'm just curious. Is sangoma_prid neccessary for Freeswitch to work with E1 (PRI) line? (wanpipe & openzap mode) I stopped sangoma_prid because, when I try to start Freeswitch, openzap yells that it cannot open D-channel (/dev/wanpipe1_if16). It is already used by sangoma_prid. But PRI calls are behaving strangely for me. Maybe this is the cause. How can I resolve this conflict? Thanks for advice. It's possible, that I am doing some newbie mistake. Michal Zubac

3 3

Sending CDRs to both file and SQL?
by Yehavi Bourvine 26 Jan '10

26 Jan '10

Hello, At present we send all our CDRs to a flat file using Asterisk's format (template "asterisk" in cdr_csv.conf.xml). This file is used by our billing software. For an interim period I would like to send the CDRs to both file and MySQL database (until I finish writing script to retreive the CDRs from the database to a file). Is it possible to send the CDRs to both? Thanks, __Yehavi:

6 7

IAX2 Support Removed.
by Brian West 26 Jan '10

26 Jan '10

Due to lack of support for the libiax2 being updated to support the newer protocol changes and the lack of interest from anyone willing to actually work on it. I have moved mod_iax to unsupported where it will stay until someone steps up to rewrite a new IAX2 lib. Thanks, Brian

2 2

making calls through an FXO gw without knowing the IP
by Milena 25 Jan '10

25 Jan '10

Hello everyone, I need some help in my dialplan, I have an FXO gateway and i can receive calls from it, now, if I assign a static IP on it, i can make calls through the fxo gateway using this: <action application="bridge" data="sofia/<profile>/<destination>@<gw_IP>"/> I want to know if it is possible to make calls through this gateway if it has a variable IP, and how to do it if so; the gateway uses SIP accounts to register to FS so i think it might be possible to route the call using one of the registered extension numbers but I am not sure how so I need some pointers, Anyone has ideas or knows how to do this?, help is greatly appreciated!

4 3

Where can I set the IP address for Freeswitch to bind to?
by vfclists 25 Jan '10

25 Jan '10

I have a rather complicated but necessary IP setup. I have a VPN running on the system, and some of the IP address a bridged with other network devices, and Freeswitch is not quite sure which one to bind to. It has an IP for the local network, one for the VPN and one for the gateway, but it appears to bind to the gateway IP or the VPN when the VPN comes up. I want it bind to the local IP, and let the VPN do its normal stuff on the outbound, I edited vars.xml and set local ip but it doesn't seem to be working. <X-PRE-PROCESS cmd="set" data="domain=192.168.1.41"/> <X-PRE-PROCESS cmd="set" data="domain_name=$${domain}"/> Is the vars.xml the right place to do it? I take it that vars.xml is where you change stuff in the default settings? Thanks /vfclists -- View this message in context: http://old.nabble.com/Where-can-I-set-the-IP-address-for-Freeswitch-to-bind… Sent from the Freeswitch-users mailing list archive at Nabble.com.

4 3

call drops on unanswered UPDATE messages after about 30s
by Christian Löschenkohl 25 Jan '10

25 Jan '10

hello we do see some new (interfering) behavior after updating to trunk (revision 16456) the call gets up normal - normal invite to sip endpoint (OpenCom 130, OpenCom X320) - we get 100 trying back - we get 180 ringing back + rtp - we get 200 ok - our freeswitch sends an ack message - after that freeswitch starts sending UPDATE messages none of these UPDATE message is answered by the sip endpoint, so the call gets dropped after about 30s. how can this UPDATE messages be disabled. i didn't find any option for that. this is also not nat problem (official ip on the sip device) please advise br -- Ing. Christian Löschenkohl Technische Leitung, Forschung & Entwicklung VoIP xpirio Telekommunikation & Service GmbH Lakeside B04 9020 Klagenfurt Austria T +43 (0) 5 77 11 - 1000 F +43 (0) 5 77 11 - 1002 E christian.loeschenkohl(a)xpirio.com

3 6

CDR Gateways
by FERNANDO VILLARROEL 25 Jan '10

25 Jan '10

Dear All. I have defined various gateways in ~/sip-profiles/external My questions is if a gateway named foo that send calls from diferents IP address like x.x.x.x and x.x.x.y to my FS. How i can doing a group for both ip address where i can doing later a sql like accountcode=foo? In this moment if i need know the traffic of customer foo, i should doing two differents cdr, one for every ip address. It's fine or i can doing of different way? I hope anyone could me explain how i can doing. my gateway foo.xml <include> <gateway name="foo"> <param name="username" value="foo"/> <param name="password" value="foo"/> <param name="realm" value="x.x.x.x"/> <param name="register" value="false"/> <param name="context" value="public"/> </gateway> </include> foo1.xml <include> <gateway name="foo1"> <param name="username" value="foo1"/> <param name="password" value="foo1"/> <param name="realm" value="x.x.x.y"/> <param name="register" value="false"/> <param name="context" value="public"/> </gateway> </include> Both gateways foo and foo1 are the same customer my cdr_csv.conf.xml <configuration name="cdr_csv.conf" description="CDR CSV Format"> <settings>   <param name="default-template" value="sql"/>   <param name="rotate-on-hup" value="false"/>  <param name="legs" value="ab"/> </settings> <templates> <template name="sql">INSERT INTO v_cdr (v_id, caller_id_name, caller_id_number, destination_number, context, start_stamp, answer_stamp, end_stamp, duration, billsec, hangup_cause, uuid, bleg_uuid, accountcode, read_codec, write_codec, remote_media_ip, network_addr) VALUES ("{v_id}", "${caller_id_name}" ,"${caller_id_number}","${destination_number}","${context}","${start_stamp}","${answer_stamp}","${end_stamp}","${duration}","${billsec}","${hangup_cause}" ,"${uuid}","${bleg_uuid}", "${accountcode}", "${read_codec}", "${write_codec}", "${remote_media_ip}", "${network_addr}");</template> The argument accountcode on my database is Blank or None for all records of gateways. Regards.

1 0

Guide of creating national fonts for Polycom phones
by Yehavi Bourvine 25 Jan '10

25 Jan '10

Hello, We had to add Hebrew labels support for Polycom phones. The way we did it is described now on the wiki at "polycom configuration" page. The process for other languages should be quite identical. We did not bother with right-to-lef issues, as these cannot be dealt with without Polycom's help. Regards, __Yehavi:

1 0

Compile error sofia on Mac OS X
by Tjardick van der Kraan 25 Jan '10

25 Jan '10

Hi, I'm trying to compile freeswitch on my MacBook pro to have a local dev instance, but i run in to the following compile error during the make: Compiling mod_sofia.c ... cc1: warnings being treated as errors mod_sofia.c: In function 'sofia_receive_message': mod_sofia.c:1446: warning: 'from_host' may be used uninitialized in this function mod_sofia.c:1446: warning: 'from_user' may be used uninitialized in this function make[5]: *** [mod_sofia_la-mod_sofia.lo] Error 1 make[4]: *** [all] Error 2 make[3]: *** [mod_sofia-all] Error 1 make[2]: *** [all-recursive] Error 1 It's an MBP running Leopard version 10.5.8 Any help would be appreciated. Kind regards, Tjardick

2 2