- FreeSWITCH-users - FreeSWITCH Mailing Lists

Core Dump
by Jerry Richards 14 May '10

14 May '10

Our Freeswitch server crashed over night and there is a core dump file (it is a snapshot of the trunk that existed on 04/27/10). Are you interested in seeing the core dump? If so, does the pastebin support that type of file? Thanks, Jerry

4 6

mod_openzap, sangoma, FAX and HW-HEC
by Helmut Kuper 14 May '10

14 May '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I'm not sure whether I'm right here or not. But maybe someone has faced same problem: Scenario A: I'm using Sangoma A104d and FreeSWITCH Version 1.0.head (17097:17188M). I enabled hardware based detection of fax and dtmf. Further hardware based HEC is enabled I'm not able to reveive a FAX (analog) via PSTN, while sending works and internal (SIP) works as well. So there is no problem with the ATAs I use nor with the network (which routes the RTP along 80 kilometers one way). Scenario B: I'm able to receive FAX from pstn with same setup, but have hardware based HEC disabled. So in this case everything works fine. I thought sangoma's hardware based Fax detection feature should have disabled HEC when a Fax is detected, but it doesn't seems so. So my current thoughts are about the question whether FS is able to disable hardware HEC via mod_openzap and wanpipe driver for the corresponding A104d channel, when FS knows that the target is a FAX device ... -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) iD8DBQFL6tu84tZeNddg3dwRAur3AJ4rOw5ocXm+aGG7spLYtA4yx23eHACfcUPF K+VHsbNiCR0XQeztzeI4iTY= =ihsg -----END PGP SIGNATURE-----

5 9

Auto-Callback For Valet Parked Call
by Jerry Richards 14 May '10

14 May '10

I like the valet parking feature. Is there a tag for calling-back/re-connecting the one who parked the call, if the parked call sits there too long (e.g. more than 2 minutes)? Thanks And Best Regards, Jerry

1 0

freeswitch RPM available for centos 5.4
by ram 14 May '10

14 May '10

hi all we have recently build freeswitch RPM ( based on 13th may 2010 git) for fusionpbx ISO you can try installing ISO or RPMS http://wiki.fusionpbx.com/index.php/CentOS_ISO Ram

2 2

ESL vs Mod_XML_Curl
by Aza Tek 14 May '10

14 May '10

Hi All I'm a bit undecided on the best approach for a web-based FreeSWITCH application, between the above two. Any advice would be most appreciated. Thanks

2 3

mod_radius_cdr invalid ELF header
by budi wibowo 14 May '10

14 May '10

dear list i follow http://wiki.freeswitch.org/wiki/Mod_radius_cdr, but onexecution i found some error 2010-05-14 04:42:00.182283 [CRIT] switch_loadable_module.c:871 Error Loading module /usr/local/freeswitch/mod/mod_radius_cdr.so **/usr/local/freeswitch/mod/mod_radius_cdr.so: invalid ELF header** trying to google but luck regards budi wibowo

3 2

Alarm Cleared on channel - Suppressing
by lakshmanan ganapathy 13 May '10

13 May '10

Hi all, I'm having sangoma A102 card and I'm using freetdm. For every 5 minutes, I get "Alarm Cleared on channel 1:1 to 1:31" and in FreeSwitch console. One of my friend told that in Asterisk, he will suppress this by setting resetinterval=never . Can any one please tell when this will occur and is there any way in FreeSwitch to suppress it?? please help!.

4 4

Robust Affordable Speech Recognition
by Kashif Kahn 13 May '10

13 May '10

Dear All, All those who have wanted a speech recognition solution for Freeswitch but found the software cost too expensive or the recognition accuracy unsatisfactory, please consider Vestec Speech Engine for Freeswitchat: http://www.vestec.ca/products A starter kit - which is a specially priced one port (ie. one channel) license for the standard engine - is available for only $25. Additional ports (channels) licenses can be purchased for $99/port. The engine comes with a free-of-charge Freeswitch connector, thereby allowing direct interaction via Dialplan. Best regards, -Kashif Kashif Kahn VP, Business Development Vestec, Inc. Waterloo, ON Canada phone: (519) 885-7615

2 3

sqlite in modmanaged
by babak yakhchali 13 May '10

13 May '10

Hi How can I send sql commands (querying about sip registrations) to sqlite in mod_managed? I know I can use "sofia status profile internal" using api interface but when there are many registrations and I just wanna check some of them this is not efficient

4 5

mod_limit
by Todd 13 May '10

13 May '10

Hey list, could someone please help me out with the syntax for mod_limit? I want to use it to block any CID that call us more than 20 time in 5 mintues. I found this in the wiki: <action application="limit_hash" data="${sip_received_ip} ${destination_number} 5/600" /> And I am sure it's close, but I need some help with the variable names and exact syntax to block inbound caller ID numbers that violate the threshold parameters of 20 times in 5 minutes. Thanks List!

2 1