Alarm Cleared on channel - Suppressing
Hi all, I'm having sangoma A102 card and I'm using freetdm. For every 5 minutes, I get "Alarm Cleared on channel 1:1 to 1:31" and in FreeSwitch console. One of my friend told that in Asterisk, he will suppress this by setting resetinterval=never . Can any one please tell when this will occur and is there any way in FreeSwitch to suppress it?? please help!.
This is different than a reset and shouldn't need to be disabled, I suspect its just a log message you should never see. Moy- why are we getting logs of this at all? Is he really going into alarm state or are we just logging a clear on the periodic update even if it wasn't in alarm state? Mike On May 13, 2010, at 8:45 AM, lakshmanan ganapathy wrote:
Hi all, I'm having sangoma A102 card and I'm using freetdm. For every 5 minutes, I get "Alarm Cleared on channel 1:1 to 1:31" and in FreeSwitch console.
One of my friend told that in Asterisk, he will suppress this by setting resetinterval=never . Can any one please tell when this will occur and is there any way in FreeSwitch to suppress it?? please help!.
That message is event-based, so you should not get that msg unless your wanpipe device is bouncing (disconnected/connected) once in a while. Ping me on IRC and we can arrange a debug session to find out what is going on. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Thu, May 13, 2010 at 12:50 PM, Michael Jerris <mike@jerris.com> wrote:
This is different than a reset and shouldn't need to be disabled, I suspect its just a log message you should never see.
Moy- why are we getting logs of this at all? Is he really going into alarm state or are we just logging a clear on the periodic update even if it wasn't in alarm state?
Mike
On May 13, 2010, at 8:45 AM, lakshmanan ganapathy wrote:
Hi all, I'm having sangoma A102 card and I'm using freetdm. For every 5 minutes, I get "Alarm Cleared on channel 1:1 to 1:31" and in FreeSwitch console.
One of my friend told that in Asterisk, he will suppress this by setting resetinterval=never . Can any one please tell when this will occur and is there any way in FreeSwitch to suppress it?? please help!.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Moises, Do the Sangoma cards provide a hdlc spy on L2 between the driver and the falc's? jan _____ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Moises Silva Sent: 13. mai 2010 20:09 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Alarm Cleared on channel - Suppressing That message is event-based, so you should not get that msg unless your wanpipe device is bouncing (disconnected/connected) once in a while. Ping me on IRC and we can arrange a debug session to find out what is going on. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Thu, May 13, 2010 at 12:50 PM, Michael Jerris <mike@jerris.com> wrote: This is different than a reset and shouldn't need to be disabled, I suspect its just a log message you should never see. Moy- why are we getting logs of this at all? Is he really going into alarm state or are we just logging a clear on the periodic update even if it wasn't in alarm state? Mike On May 13, 2010, at 8:45 AM, lakshmanan ganapathy wrote:
Hi all, I'm having sangoma A102 card and I'm using freetdm. For every 5 minutes, I get "Alarm Cleared on channel 1:1 to 1:31" and in FreeSwitch console.
One of my friend told that in Asterisk, he will suppress this by setting resetinterval=never . Can any one please tell when this will occur and is there any way in FreeSwitch to suppress it?? please help!.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Let's try to not hijack threads :-) I was not familiar with the term "FALC", after googling it I must assume you are talking about the framer ( falc seems to be an infineon framer? ), correct me if I'm wrong. The functionality you look for is probably achieved through wanpipemon -i <interface> -pcap -pcap_file isdn.pcap -prot ISDN -full -systime -c trd That will trace the D-channel frames and dump them in a pcap file. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Thu, May 13, 2010 at 2:18 PM, Jan Berger <jan.berger@video24.no> wrote:
Moises,
Do the Sangoma cards provide a hdlc spy on L2 between the driver and the falc’s?
jan
------------------------------
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Moises Silva *Sent:* 13. mai 2010 20:09 *To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] Alarm Cleared on channel - Suppressing
That message is event-based, so you should not get that msg unless your wanpipe device is bouncing (disconnected/connected) once in a while.
Ping me on IRC and we can arrange a debug session to find out what is going on.
Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
On Thu, May 13, 2010 at 12:50 PM, Michael Jerris <mike@jerris.com> wrote:
This is different than a reset and shouldn't need to be disabled, I suspect its just a log message you should never see.
Moy- why are we getting logs of this at all? Is he really going into alarm state or are we just logging a clear on the periodic update even if it wasn't in alarm state?
Mike
On May 13, 2010, at 8:45 AM, lakshmanan ganapathy wrote:
Hi all, I'm having sangoma A102 card and I'm using freetdm. For every 5 minutes, I get "Alarm Cleared on channel 1:1 to 1:31" and in FreeSwitch console.
One of my friend told that in Asterisk, he will suppress this by setting resetinterval=never . Can any one please tell when this will occur and is there any way in FreeSwitch to suppress it?? please help!.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Jan Berger
-
lakshmanan ganapathy
-
Michael Jerris
-
Moises Silva