- FreeSWITCH-users - FreeSWITCH Mailing Lists

Show ring-group name on phone
by René Weiss 07 Sep '18

07 Sep '18

Hi What is the best/right way to show the name of the called ring-group on the ringing phone? At the moment I have configured 2 ring groups (let's call them "main number" and "hotline") which bridge incoming calls like this: <action application="bridge" data="user/101@$${domain_name}, user/102@$${domain_name}, user/103@$${domain_name} "/> The problem is now, that on the display of the ringing phones I can only see that there's a call from <caller-number> to the number of the individual phone. What I would like to see is: call from <caller-number> to <ring-group number> (or <ring-group-name>) (We use Yealink phones (mostly T46s) if that helps) Thanks.

2 1

SIP calls in from provider
by Rick Jarvis 07 Sep '18

07 Sep '18

I have a provider wanting to route calls in via direct SIP address. I’m not sure exactly what’s needed as used to setting up a gateway with username and password. Can anyone summarise (or point me to) the steps required to make this work? Am thinking: - ACL for provider’s IPs - Something needed in ‘public’ dial plan to catch whateveraddress(a)mysipdomain.com - what exactly? - Anything else required?

2 1

Re: [Freeswitch-users] mod_flite fails due to undefined symbol: cmu_lex_init
by kaiduan xie 06 Sep '18

06 Sep '18

With the command as below, LD_PRELOAD="/usr/local/lib/libflite_cmu_us_kal.so /usr/local/lib/libflite_usenglish.so /usr/local/lib/libflite_cmulex.so /usr/local/lib/libflite.so" ./bin/freeswitch I finally got mod_flite working on Ubuntu 16.04 with Freeswitch 1.8.0 source code So the question is why Freeswitch does not load above libraries by itself? /Kaiduan On Wednesday, September 5, 2018, 11:54:07 AM EDT, kaiduan xie via FreeSWITCH-users <freeswitch-users(a)lists.freeswitch.org> wrote: Thanks Michael. I downloaded the flite 2.0 from http://files.freeswitch.org/downloads/libs/flite-2.0.0.tar.gz and build it as below ./configure --enable-sharedmakemake install build and run freeswitch-1.8, the same error occurred again. However mod_flite was successfully loaded if I ran freeswitch as below (used LD_PRELOAD to load libflite_cmulex) kxie@kxie-Inspiron-3656:~/freeswitch-install$ pwd/home/kxie/freeswitch-installkxie@kxie-Inspiron-3656:~/freeswitch-install$ LD_PRELOAD=/usr/local/lib/libflite_cmulex.so ./bin/freeswitch /Kaiduan On Tuesday, September 4, 2018, 12:32:54 PM EDT, Michael Jerris <mike(a)jerris.com> wrote: Our build requires flite 2.0 …. Our latest Debian unstable and 1.8 repos have these packages, for ubuntu you likely need to build these packages yourself from our support deps in stash. On Sep 3, 2018, at 12:26 PM, kaiduan xie via FreeSWITCH-users <freeswitch-users(a)lists.freeswitch.org> wrote: From: kaiduan xie <kaiduanx(a)yahoo.ca> Subject: mod_flite fails due to undefined symbol: cmu_lex_init Date: August 30, 2018 at 7:10:06 PM EDT To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> Hi all, I build and run FreeSwitch 1.6.20 from source on Ubuntu 16.0.4 xenial, the mod_filte failed while loading, 2018-08-30 19:03:30.786468 [CRIT] switch_loadable_module.c:1522 Error Loading module /home/kxie/freeswitch-dev-install/lib/freeswitch/mod/mod_flite.so**/usr/local/lib/libflite_cmu_us_slt.so.1: undefined symbol: cmu_lex_init** Any idea to solve this issue? Many thanks, /Kaiduan _________________________________________________________________________ Professional FreeSWITCH Services sales(a)freeswitch.com https://freeswitch.com Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com _________________________________________________________________________ Professional FreeSWITCH Services sales(a)freeswitch.com https://freeswitch.com Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com

3 3

(no subject)
by Stefano Bertuola 06 Sep '18

06 Sep '18

1 0

Re: [Freeswitch-users] mod_flite fails due to undefined symbol: cmu_lex_init
by Michael Jerris 05 Sep '18

05 Sep '18

Our build requires flite 2.0 …. Our latest Debian unstable and 1.8 repos have these packages, for ubuntu you likely need to build these packages yourself from our support deps in stash. > On Sep 3, 2018, at 12:26 PM, kaiduan xie via FreeSWITCH-users <freeswitch-users(a)lists.freeswitch.org> wrote: > > > From: kaiduan xie <kaiduanx(a)yahoo.ca> > Subject: mod_flite fails due to undefined symbol: cmu_lex_init > Date: August 30, 2018 at 7:10:06 PM EDT > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > > > Hi all, > > I build and run FreeSwitch 1.6.20 from source on Ubuntu 16.0.4 xenial, the mod_filte failed while loading, > > 2018-08-30 19:03:30.786468 [CRIT] switch_loadable_module.c:1522 Error Loading module /home/kxie/freeswitch-dev-install/lib/freeswitch/mod/mod_flite.so > **/usr/local/lib/libflite_cmu_us_slt.so.1: undefined symbol: cmu_lex_init** > > Any idea to solve this issue? > > Many thanks, > > /Kaiduan > > > > _________________________________________________________________________ > Professional FreeSWITCH Services > sales(a)freeswitch.com > https://freeswitch.com > > Official FreeSWITCH Sites > https://freeswitch.com/oss > https://freeswitch.org/confluence > https://cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > https://freeswitch.com

2 1

Capture the audio stream of a call once answered?
by Fred Pettersson 05 Sep '18

05 Sep '18

Hi, is it possible to get hold of/capture the "voice stream" (the RTP stream I guess) once you answered the call? I would like to send it to an external server with our own service for processing the stream but we would like to keep control of the answered call in FreeSWITCH. /Fred

1 0

fs_cli double free or corruption.
by David Villasmil 05 Sep '18

05 Sep '18

Hello all, just FYI: working on fs_cli, after doing an bgapi originate i got *** Error in `fs_cli': double free or corruption (fasttop): 0x0000000001283070 *** Don't have a dump, sorry. freeswitch(a)argo-fs04.singlecomm.com> status UP 0 years, 0 days, 9 hours, 30 minutes, 1 second, 19 milliseconds, 690 microseconds FreeSWITCH (Version 1.6.19 -36-7a77e0b 64bit) is ready 373 session(s) since startup 0 session(s) - peak 21, last 5min 2 0 session(s) per Sec out of max 30, peak 5, last 5min 1 1000 session(s) max min idle cpu 0.00/98.40 Current Stack Size/Max 240K/8192K Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337 ᐧ

1 0

TLS SNI
by Andrew Cassidy 04 Sep '18

04 Sep '18

Hi Guys, I've seen this asked before but not answered, does FreeSWITCH support SNI in TLS? The main reason I ask is I have a customer having issues with the Let's Encrypt SAN certificate I have so am looking at getting a cheap paid one and installing that side-by-side. Kind regards, -- *Andrew Cassidy BSc (Hons) MBCS* Managing Director 0330 44 55 960 <+443304455960> andrew(a)cassidyweb.co.uk www.cassidyweb.co.uk

2 3

Tagged v.1.8.1 - will there be pre-built packages, Debian 9/CentOS 7?
by Richard Chan 04 Sep '18

04 Sep '18

Looks like 1.8 is tagged starting at 1.8.1. Will there be pre-built packages distributed Couldn't see anything new in http://files.freeswitch.org/repo/deb/freeswitch-1.8 Also - I remember discussion about Debian Stretch issues(OpenSSL related). What is the current status of Stretch and is that supposed to be the reference platform for 1.8? Thanks @FreeSWITCH team! -- Richard Chan

4 5

Add header to outbound registration
by David Villasmil 03 Sep '18

03 Sep '18

Hello guys, Is there any way of adding a custom header to an outbound registration for a gateway? I know you can add headers on the gateway definition, but that only works for outbound calls, like this: <include> <gateway name="mygw"> <param name="username" value="user" /> <param name="password" value="password" /> <param name="register" value="false"/> <param name="caller-id-in-from" value="true"/> <param name="realm" <param name="proxy" value="mydomain.com:5060"/> <variables> <variable name="sip_h_X-destination" value="outbound"/> </variables> </gateway> </include> Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337 ᐧ

1 0