- FreeSWITCH-users - FreeSWITCH Mailing Lists

NORTEL IP Phone 1535 with Video
by Timothy Bolton 30 Nov '11

30 Nov '11

Does anyone have any experience in setting up video to work with these Nortel phones? I am completely lost. I've searched the wiki and went to the IRC channels too. Any help would be glorious! -- 'We who cut mere stones must always be envisioning cathedrals.' Quarry Worker's Creed

3 4

FreeSWITCH Conference Call Today
by Michael Collins 30 Nov '11

30 Nov '11

Don't forget: Jean-Marc Valin from Mozilla will be in to discuss the OPUS codec today! Here's the agenda page: http://wiki.freeswitch.org/wiki/FS_weekly_2011_11_30 Talk to you soon! -Michael

1 0

Run few script commands after the user answers the call (during that call)
by Mariusz Sanitariusz 30 Nov '11

30 Nov '11

Hi, I'm writing a script (in Python, but I'll be grateful for examples in any language) processing incoming calls and I'm stuck at the final point of my script. Simply, I don't have any idea how to achieve something like this: - at the end of my script I have to call (bridge, originate, forgive me my lack of knowledge) a group of users (one at the time and after the specified timeout, if that user doesn't answer, try another user from that group of users and so on) and when an user answers a call I have to get an information on which user answered and pass that information via HTTP request to a web service and it has to be done at the moment of some user answering, not after the call has ended The problem is that I don't know how to get information about which user has answered the phone and make a HTTP request just after the call has been answered. Could you please provide me witch some hints or code samples on how to achieve this behavior. Best regards Mariusz Sanitariusz

2 1

T.38 is broken again
by Boris Kovalenko 30 Nov '11

30 Nov '11

Hello! After some updates to FreeSwitch I found that T.38 faxes are broken again. My test enviroments are: Audiocodes MP114 <---> FreeSwitch <--> Cisco 5350 <--> PSTN Kapanga softphone <---> FreeSwitch <--> AudioCodes MP-114 I see that Kapanga softphone reports "Rejecting fax call. Enable fax ReINVITE to send faxes". I haven't changed Kapanga or Audiocodes configurations. Only upgraded Freeswitch to the latest git (FreeSWITCH Version 1.0.head (git-fafcc46 2011-11-30 15-19-34 +0800). Please help, faxes it very important to use. Please ask for more information as needed. -- Regards, Boris

2 3

xml_curl directory - doing authentication in cgi, how to recreate user's password?
by Fraser Redmond 30 Nov '11

30 Nov '11

I am setting up a connection to a database of users, whose passwords have been saved as a one-way hash. That means that my xml_curl php/sql will need to perform the authentication, and return a user without any password. (According to Anthony, back in 2008: http://lists.freeswitch.org/pipermail/freeswitch-users/2008-February/029882… ) Only thing is I can't find any mention anywhere of how to re-generate the user's password from the sip_auth variables in order to run it through my one-way hash for comparison to the database. It's got to be something to do with these: sip_auth_nonce = 4d95dd9f-2247-474a-8496-aa7c08700fe7 sip_auth_cnonce = a088c6b6ba18d1387a45998b6bfa842d sip_auth_nc = 0000000a sip_auth_response = 9edefab216a46ed75f1ed1297dd9c9d3 Any ideas how to rebuild the original user's password? Or is there a way to send the password through as part of the post? (maybe using enable-post-var) Cheers, Fraser

3 9

Fwd: FS compile errors on Solaris 10 sparc
by daemonserj TVC 29 Nov '11

29 Nov '11

Hello all! I'm newbie :) System is SunOS tornado 5.10 Generic_144488-17 sun4u sparc SUNW,Sun-Fire-V240 Solaris SunStudio 12, CBE 1.7 I tried to compile concerning http://wiki.freeswitch.org/wiki/Installation_Guide#Solaris And I got : CC: Warning: Option -ggdb passed to ld, if ld is invoked, ignored otherwise CC: Warning: Option -fPIC passed to ld, if ld is invoked, ignored otherwise "/export/home/freeswitch/freeswitch/libs/esl/src/include/esl.h", line 485: Error: "," expected instead of "int". "/export/home/freeswitch/freeswitch/libs/esl/src/include/esl.h", line 491: Error: A declaration was expected instead of "return". "/export/home/freeswitch/freeswitch/libs/esl/src/include/esl.h", line 491: Error: s1 is not defined. "src/esl_oop.cpp", line 295: Error: __func__ is not defined. "src/esl_oop.cpp", line 300: Error: __func__ is not defined. "src/esl_oop.cpp", line 364: Error: __func__ is not defined. "src/esl_oop.cpp", line 391: Error: __func__ is not defined. "src/esl_oop.cpp", line 397: Error: __func__ is not defined. "src/esl_oop.cpp", line 404: Error: __func__ is not defined. "src/esl_oop.cpp", line 409: Error: __func__ is not defined. "src/esl_oop.cpp", line 416: Error: __func__ is not defined. "src/esl_oop.cpp", line 421: Error: __func__ is not defined. "src/esl_oop.cpp", line 429: Error: __func__ is not defined. "src/esl_oop.cpp", line 434: Error: __func__ is not defined. "src/esl_oop.cpp", line 442: Error: __func__ is not defined. "src/esl_oop.cpp", line 447: Error: __func__ is not defined. "src/esl_oop.cpp", line 455: Error: __func__ is not defined. "src/esl_oop.cpp", line 460: Error: __func__ is not defined. "src/esl_oop.cpp", line 469: Error: __func__ is not defined. "src/esl_oop.cpp", line 474: Error: __func__ is not defined. "src/esl_oop.cpp", line 483: Error: __func__ is not defined. "src/esl_oop.cpp", line 488: Error: __func__ is not defined. "src/esl_oop.cpp", line 496: Error: __func__ is not defined. "src/esl_oop.cpp", line 501: Error: __func__ is not defined. 24 Error(s) detected. make[5]: *** [src/esl_oop.o] Error 24 make[4]: *** [/export/home/freeswitch/freeswitch/libs/esl/libesl.so] Error 2 make[3]: *** [mod_hash-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 -bash-3.00$ -bash-3.00$ uname SunOS -bash-3.00$ uname -a PS. СXXXPP configured to /usr/bin/cc -E it seems /libs/esl/src/include/esl.h has not nothing criminal

2 1

Mod_cdr_csv, no cdr_csv.conf.xml in standard installation.
by Henrik Aagaard Sørensen 29 Nov '11

29 Nov '11

I've installed a very basic installation of FreeSwitch, following this guide: http://wiki.freeswitch.org/wiki/Linux_Quick_Install_Guide Everything works fine, I also get CDR files in my freeswitch/log/cdr-csv directory. But I cannot find the file cdr_csv.conf.xml in the conf/ directory (anywhere, including autoload_configs/). Reading this wiki-page: http://wiki.freeswitch.org/wiki/Mod_cdr_csv says that it requires the cdr_csv.conf.xml file. Does FreeSwitch have a standard Mod_cdr_csv settings, which are used in case the conf-file is missing or...?

4 7

MInimal Hardware requirements - G729
by Michele M 29 Nov '11

29 Nov '11

Hi there, it is my intention to buy 100 g729 sw codecs from FS to setup a mee -me conference system.Which are the minimal hw requirements to support 100 conference legs where all the codecs implied are G729 ? ( meaning no transcoding from pcmu->G729 and viceversa). Thx in advance Michele

7 12

playAndGetDigits problem in LUA program
by Sanath Prasanna 29 Nov '11

29 Nov '11

Hi all, I used following to get phone number from caller in LUA program. function get_dest() new_number = session:playAndGetDigits(9, 11, 3, 3000, "#", lang_path .. "enter_dest_number.wav", lang_path .. "error.wav", "\\d+"); session:say(new_number, "en", "number", "pronounced"); session:setVariable("dest_numbers",new_number); end -- main -- freeswitch.consoleLog("info", "Voicemail - select_main_menu:\n\r"); reeswitch.consoleLog("info", "Voicemail - Select English :\n\r"); get_dest(); .. .. if caller hang off the phone without entering number(dtmf), I can see lot of same log lines in the freeswitch console log. (around 50000 lines in 1 or 2 sec.Pls see below). *is it bug or just need to ignore. Pls advice. * Br, Sanath 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu: 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - Select English 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - ./vm/en/ 2011-11-22 05:58:23.301593 [INFO] switch_cpp.cpp:1190 Voicemail - select_main_menu:

2 2

removing participant from 3-way bridge
by Royce Mitchell III 29 Nov '11

29 Nov '11

Can I use "uuid_transfer <uuid> park inline" to pull a leg out of a 3-way bridge without breaking the bridge? I want to put that leg back into the callcenter_mod queue once it's done connecting the callers. On Tue, Nov 22, 2011 at 1:22 PM, Anthony Minessale < anthony.minessale(a)gmail.com> wrote: > you can't use break to stop bridging. > you can do "uuid_transfer <uuid> park inline" to put it into an idle state > > > > On Tue, Nov 22, 2011 at 5:54 AM, Nagalenoj H. <nagalenoj(a)gmail.com> wrote: > >> Hi, >> I wanted to cancel the bridge application after issuing it and I tried >> using 'break' application. break application didn't work. But, when I tried >> using playback application followed by break, it worked. >> >> connect >> >> sendmsg >> call-command: execute >> execute-app-name: answer >> >> sendmsg >> call-command: execute >> execute-app-name: bridge >> execute-app-arg: user/1001 >> >> sendmsg >> call-command: execute >> execute-app-name: break >> >> Logs: >> http://pastebin.freeswitch.org/17843 >> >> Git version as of 18/11/2011. >> >> -- >> Regards, >> Nagalenoj H. >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://wiki.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > > -- > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > Twitter: http://twitter.com/FreeSWITCH_wire > > AIM: anthm > MSN:anthony_minessale@hotmail.com > GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com > IRC: irc.freenode.net #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org > googletalk:conf+888@conference.freeswitch.org > pstn:+19193869900 > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > -- There's a fine line between genius and insanity. I like to use it for dental floss.

4 15