- FreeSWITCH-users - FreeSWITCH Mailing Lists

mod_xml_curl VS https on Windows.
by Rob Moore 29 Feb '12

29 Feb '12

Hi There, I'm having a problem with mod_xml_curl on Windows (2008 R2) while attempting to curl requests/ responses over HTTPS. While running request over HTTP the curl works fine but simply switching to HTTPS causes the process to error. I've checked the IIS logs on our webserver and can see the requests are not arriving and running a packet trace on the Freeswitch server it seems the request is not even leaving the server which points towards a configuration problem within freeswitch itself either within the Curl Config or something relating to OpenSSL. Here is the error I receive from the Freeswitch logs: 2012-02-27 22:50:14.284328 [ERR] mod_xml_curl.c:305 Received HTTP error 0 trying to fetch https://xxxx.xxxxxx-contact.com/FreeSwitchModXmlCurlServer/FreeswitchCurlSe… data: [hostname=DS_Freeswitch&section=directory&tag_name=domain&key_name=name&key_value=sipxxxx.xxxxxx--contact.com&Event-Name=REQUEST_PARAMS&Core-UUID=a474 3447-f6f2-4dd7-b8c2-81df33cb533b&FreeSWITCH-Hostname=DS_Freeswitch&FreeSWITCH-Switchname=DS_Freeswitch&FreeSWITCH-IPv4=10.1.1.98&FreeSWITCH-IPv6=%3A%3A1&Eve nt-Date-Local=2012-02-27%2022%3A50%3A14&Event-Date-GMT=Mon,%2027%20Feb%202012%2022%3A50%3A14%20GMT&Event-Date-Timestamp=1330383014284328&Event-Calling-File= sofia_reg.c&Event-Calling-Function=sofia_reg_parse_auth&Event-Calling-Line-Number=2108&action=sip_auth&sip_profile=sipPhones&sip_user_agent=Yealink%20SIP-T2 2P%xxx.xxx.xxx.xxx%2000%3A15%3A65%3A22%3A24%3A29&sip_auth_username=1001&sip_auth_realm=sipxxxx.xxxxxx--contact.com&sip_auth_nonce=d0587e72-xxxx-4734-f391a5 54987f&sip_auth_uri=sip%3Asipxxxx.xxxxxx--contact.com&sip_contact_user=1001&sip_contact_host=87.194.173.226&sip_to_user=1001&sip_to_host=sipxxxx.xxxxxx--con tact.com&sip_from_user=1001&sip_from_host=sipxxxx.xxxxxx--contact.com&sip_request_host=sipxxxx.xxxxxx--contact.com&sip_auth_qop=auth&sip_auth_cnonce=0a4f113 b&sip_auth_nc=00000004&sip_auth_response=418b5804263d3cbaa75e25beecdf5088&sip_auth_method=REGISTER&key=id&user=1001&domain=sipxxxx.xxxxxx--contact.com&ip=xxx.xxx.xxx.xxx] The Xml_curl.conf.xml only has the Curl URL added with all other variables commented out so I wouldn't expect anything in there to cause any problems. This only leaves me with OpenSSL. Freeswitch was definitely built with OpenSSL however it seems some of the configuration for OpenSSL is default to Linux UNC paths. For example if I attempt to create TLS certificates from the command prompt I receive this error: C:\FreeSwitch>openssl req -new -out "careq.pem" -newkey rsa:1024 -keyout "cakey.pem" -config "tmpfile1.cfg" -nodes -sha1 WARNING: can't open config file: /usr/local/ssl/openssl.cnf error on line -1 of tmpfile1.cfg 3568:error:02001002:system library:fopen:No such file or directory:..\..\openssl-1.0.0a\crypto\bio\bss_file.c:163:fopen(' 3568:error:2006D080:BIO routines:BIO_new_file:no such file:..\..\openssl-1.0.0a\crypto\bio\bss_file.c:166: 3568:error:0E078072:configuration file routines:DEF_LOAD:no such file:..\..\openssl-1.0.0a\crypto\conf\conf_def.c:197: After calling the following to redirect open SSL to another version of the .cnf file it requires (installed from www.openssl.org<http://www.openssl.org> ) set OPENSSL_CONF="C:\Program Files (x86)\GnuWin32\share\openssl.cfg" The this eliminates the first error but ther sys library, Bio Routine and Configuration file routines errors still appear 3568:error:02001002:system library:fopen:No such file or directory:..\..\openssl-1.0.0a\crypto\bio\bss_file.c:163:fopen(' 3568:error:2006D080:BIO routines:BIO_new_file:no such file:..\..\openssl-1.0.0a\crypto\bio\bss_file.c:166: 3568:error:0E078072:configuration file routines:DEF_LOAD:no such file:..\..\openssl-1.0.0a\crypto\conf\conf_def.c:197: Does anyone have any idea what the problem could be here? I could be looking in completely the wrong place for the answer here. Any help, advice or direction would be greatly appreciated. Thanks Rob

2 3

Ported number, phone ring after hang up
by Miha Zoubek 29 Feb '12

29 Feb '12

Hi, I am having problems with ported number. After call is being ansered (ported number), than if the person who is having ported number hang up the phone, his phone is being called again. I have also paste log in pastebin. Dialplan: <condition field="destination_number" expression="^0(\d+)$" brake="on-true" > <action application="log" data="INFO Before Auth "/> <action application="log" /> <action application="set" data="process_cdr=true" /> <action inline="true" application="set" data="CALLID=h323-conf-id=${uuid}"/> <action inline="true" application="set" data="SERVICENUM=h323-prompt-id=${destination_number}"/>  <action inline="true" application="set" data="CALLINGNUMBER=${caller_id_number}"/> <action inline="true" application="set" data="CALLINGNUMBER=${destination_number}"/> <action inline="true" application="set" data="USERNAME=${accountcode}"/> <action inline="true" application="set" data="PASSWD=${password}"/>  <action application="execute_extension" data="RADIUS_ANI_AUTH XML default"/>     <action application="enum" data="386$1 enumsbc.softnet.si"/> <action application="bridge" data="${enum_auto_route}"/> <action application="bridge" data="sofia/external/386$1(a)xxx.xxx.xxx.xxx"/>    </condition> </extension> </include> http://pastebin.freeswitch.org/18549

2 2

CallerID changing after Bridge using SLA on Polycom Phones
by Bob McCarthy 29 Feb '12

29 Feb '12

I am having an issue similar to that experienced by Wellie Chao in his email "Caller ID on inbound calls on Polycom" 2010/4/22. The call is from an Audiocodes gateway with a dial string of *NXXXXXX# CallerID number sent is 101 which corresponds to the FXS port it came from, there is no CallerID Name. I modify the CallerID name and number in the dialplan before the bridge. <action application="export" data="effective_caller_id_name=some name"/> <action application="export" data="effective_caller_id_number=XXX-XXX-XXXX"/> <action application="export" data="ignore_display_updates=false"/> <action application="export" data="import=effective_caller_id_name"/> <action application="export" data="import=effective_caller_id_number"/> <action application="bridge" data="user/CO999x1001.3@${domain_name}"/> <action application="answer"/> On Ring the CallerID name and number are what I have changed it to. On Bridge, 80% of the time the CallerID name and number follow thru, 20% of the time it changes to what Leg A had originally before I used the export application.( name is blank and number is 101). if I put the call on Hold it reverts back to what I expected. I have tried to use set, moved the import after the bridge, ignore_display_updates=true. Any Ideas? On a further note, when phone 2 presses the shared line it shows the same CallerID name and number as phone 1. When you press BargeIn both the CallerID name and number change to 101. i.e. name is 101 number is 101 on both phones. this happens every time, is there a way to stop this behavior as well ? Thanks Bob McCarthy

1 0

barge-in on active call
by Truman Boyes 29 Feb '12

29 Feb '12

Hi, I am interested in having barge-in capabilities for active calls, essentially to have the ability to join a call that is in progress. Taking a look at the eavesdrop application, I think this will do what I want. Quick question: instead of having calling prefixes to enable the app, could I call the eavesdrop application after getting busy/congestion and allow barge-in? Kind regards, -- --truman

2 1

Brian in my Log!
by Anita Hall 29 Feb '12

29 Feb '12

Brian has made a mysterious appearance in my FreeSWITCH log :O [NOTICE] switch_utils.c:295 Adding 192.0.2.0/24 (allow) [brian(a)10.136.21.216] to list domains My acl.conf.xml is the default and there is no brian user on my system. I hope this is not Brian West. He should be taking rest. regards, Anita

3 2

Error in an example of FreeSWITCH cookbook
by Владислав Гришин 29 Feb '12

29 Feb '12

I have FreeSWITCH Version 1.0.6 (hacked-20110607T065231Z) on Centos 5.5 I run script /usr/src/freeswitch-1.0.6/libs/esl/perl/logger.pl - all ok. Script from 59 page of FreeSWITCH cookbook finishes with an error Global symbol "$e" requires explicit package name at ./cdr_to_file.pl line 22. Execution of ./cdr_to_file.pl aborted due to compilation errors. 22 line is my @raw_data = split "\n",$e->serialize(); Vladislav Grishin

2 1

Adding Application Module Project to Solution
by John Rose 28 Feb '12

28 Feb '12

Is there an easy way to add an application module project that is not in the existing Windows solution but is in the distributed ..\mod\applications source directory? If I just manually add it to the solution with Visual Studio the Windows build breaks, but if I edit the Freeswitch.2010.sln file in various places it works OK. but there must be an easier way. Thanks, John

2 4

SQL ERR [database is locked]
by Klaus Hochlehnert 28 Feb '12

28 Feb '12

Hi all, I've compiled FS on a server mid of December. Since then it worked basically without problems (with some reboots in between for OS updates). But today no calls could be made or received. When checking the log I found this every 30 seconds: ... 2012-02-28 09:29:17.691556 [DEBUG] switch_core_state_machine.c:86 sofia/internal/10(a)192.168.1.22 Standard DESTROY 2012-02-28 09:29:17.691556 [DEBUG] switch_core_state_machine.c:504 (sofia/internal/10(a)192.168.1.22) State DESTROY going to sleep 2012-02-28 10:57:37.091612 [ERR] switch_core_sqldb.c:481 SQL ERR [database is locked] COMMIT 2012-02-28 10:57:37.091612 [ERR] switch_core_sqldb.c:481 SQL ERR [cannot start a transaction within a transaction] BEGIN 2012-02-28 10:58:06.951594 [ERR] switch_core_sqldb.c:481 SQL ERR [database is locked] COMMIT 2012-02-28 10:58:06.951594 [ERR] switch_core_sqldb.c:481 SQL ERR [cannot start a transaction within a transaction] ... After rebooting the server everything worked again. Reproducing might not be so easy as it took several weeks to hit this problem (and it's a productive system). Any idea what this might be? Thanks Klaus

1 0

SQL support disappears all of a sudden
by Anita Hall 28 Feb '12

28 Feb '12

On my production machine, I was running fine with CLI commands such as "show calls" but all of a sudden > show calls -ERR SQL DISABLED NO DATA AVAILABLE! regards, Anita

2 2

Error in an example of FreeSWITCH cookbook
by Владислав Гришин 28 Feb '12

28 Feb '12

I have FreeSWITCH Version 1.0.6 (hacked-20110607T065231Z) on Centos 5.5 I run script /usr/src/freeswitch-1.0.6/libs/esl/perl/logger.pl - all ok. Script from 59 page of FreeSWITCH cookbook finishes with an error Global symbol "$e" requires explicit package name at ./cdr_to_file.pl line 22. Execution of ./cdr_to_file.pl aborted due to compilation errors. 22 line is my @raw_data = split "\n",$e->serialize(); Vladislav Grishin

1 0