- FreeSWITCH-users - FreeSWITCH Mailing Lists

ICTDialer, over 250 concurrent calls, some questions
by Sayyed Mohammad Emami Razavi 13 Mar '13

13 Mar '13

When i sent one campaign with over 250 contacts, over 190 calls faild! 100 calls status: "DESTINATION_OUT_OF_ORDER" 55 calls status: "NORMAL_TEMPORARY_FAILURE" 41 calls status:"UNKNOWN" 3 calls status: "NETWORK_OUT_OF_ORDER" 1 call status: "NORMAL_CIRCUIT_CONGESTION" 58 calls status: "NORMAL_CLEARING" -> some of them moved to voice mail(belongs to ext) and some other routed correctly to destination My architect to broadcast is almost funny: There is one trunk and there are two FSs. One of my FS(#1) connected to Trunk & I have created one Extension on it with user and pass(directory). Other FS(#2) has ICTDialer and plivo and makes cloud campaigns. My trunk on it is that Extension with that user and pass on FS#1! Any suggestion? I've attached CSV CDR log files.

4 4

Re: [Freeswitch-users] ftdm command not working
by Peter Olsson 13 Mar '13

13 Mar '13

The module mod_freetdm is probably not loaded in FS. /Peter Från: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För ashish gautam Skickat: den 13 mars 2013 10:36 Till: freeswitch-users(a)lists.freeswitch.org; freeswitch(a)gmail.com Ämne: [Freeswitch-users] ftdm command not working Hi, I have just installed FS and configured it for freetdm module. I also have libpri and DAHDI installed properly with all dependencies and dahdi is working fine. Now, when I launch FS CLI no and run ftdm's commands ,they do not work and it shows "Unknown Command: ftdm" How to get rid of that? Please help me. -- REGARDS ============================================ Ashish Gautam (+918802865008) !DSPAM:514044c032761220342362!

2 1

Recording channels input and output voice in two separate files.
by Nikhitha 13 Mar '13

13 Mar '13

In freeswitch when a call has been established between two users then i can record the whole phone conversation using record_session.In asterisk there is command called "monitor" which is used to record the channels input and output voice in two separate files(Similar command of monitor in freeswitch is record_session as shown in http://wiki.freeswitch.org/wiki/Rosetta_stone)Then howz it possible in freeswitch to record the incoming voice in one file and the outgoing voice in another wav file?? Anyone help me out with this.... -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Recording-channels-input-and-… Sent from the freeswitch-users mailing list archive at Nabble.com.

1 0

ICTDialer, over 250 concurrent calls, some questions
by Falak Nawaz 13 Mar '13

13 Mar '13

CDR logs for Freeswitch and outbound logs of Plivo will help to identify why so many calls failed. Some information about your trunk provider and contact list would also be helpful. To understand the architecture of ICTDialer and its relationship with Plivo and Freeswitch more clear: ICTDialer sends REST request to Plivo Framework Plivo Framework uses Event socket to connect to FreeSwitch FreeSwitch dials contacts using the trunk provider information Best Regards, Falak Nawaz

1 0

Re: [Freeswitch-users] ftdm command not working
by Muhammad Shahzad 13 Mar '13

13 Mar '13

Uncomment mod_freetdm in modules.conf.xml and configure it in freetdm.conf.xml. On 13 Mar 2013 10:53, "Peter Olsson" <POlsson(a)enghouse.com> wrote: > > The module mod_freetdm is probably not loaded in FS. > > > > /Peter > > > > > > Från: freeswitch-users-bounces(a)lists.freeswitch.org [mailto: freeswitch-users-bounces(a)lists.freeswitch.org] För ashish gautam > Skickat: den 13 mars 2013 10:36 > Till: freeswitch-users(a)lists.freeswitch.org; freeswitch(a)gmail.com > Ämne: [Freeswitch-users] ftdm command not working > > > > Hi, > > I have just installed FS and configured it for freetdm module. I also have libpri and DAHDI installed properly with all dependencies and dahdi is working fine. > > Now, when I launch FS CLI no and run ftdm's commands ,they do not work and it shows "Unknown Command: ftdm" > > How to get rid of that? Please help me. > > -- > REGARDS > ============================================ > Ashish Gautam > > (+918802865008) > > !DSPAM:514044c032761220342362! > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >

1 0

ftdm command not working
by ashish gautam 13 Mar '13

13 Mar '13

Hi, I have just installed FS and configured it for freetdm module. I also have libpri and DAHDI installed properly with all dependencies and dahdi is working fine. Now, when I launch FS CLI no and run ftdm's commands ,they do not work and it shows "Unknown Command: ftdm" How to get rid of that? Please help me. -- REGARDS ============================================ *Ashish Gautam* (+918802865008)

1 0

Caller ID Name is lost on answer
by Steven Schoch 13 Mar '13

13 Mar '13

My Polycom SoundPoint IP 320 shows the Caller-ID name while the phone is ringing, but as soon as I pick it up, the name is changing to the number. E.g. while ringing it says: Call from: ACME WIDGETS(+14085551212) but when I pick up the phone it says: From:+4085551212(+14085551212) I know I messed something up, but I don't know what. Any ideas? -- Steve

2 1

Debian packaging - some questions
by Cal Leeming [Simplicity Media Ltd] 13 Mar '13

13 Mar '13

Hey, So today I went to go and create a Debian package for FreeSWITCH using the existing packaging structure; https://github.com/traviscross/freeswitch/blob/master/debian/ http://wiki.freeswitch.org/wiki/Debian_packages_buildscript The first problem is that neither the helper or the debian/ dir have been configured for compatibility with pbuilder, which makes it untidy/non-sane to place this onto an automated production build system (it also impacts security slightly due to untrusted external code being ran outside of a chroot - but that's possibly an entirely different debate). The second problem is that the build resulted in nearly 100 different *.deb files This also poses somewhat of an annoyance in automated deployment environments, for example saltstack, where the configuration would have to list each individual FreeSWITCH module. It also feels very untidy. I understand that certain packages (such as libfreeswitch, libfreeswitch-dev, freeswitch-server etc) should be separated. But having a package for each module, the only use I could think of for this, would be if the Debian package compiles absolutely every module possible, and is then linked dynamically, rather than compiled static. This means enabling/disabling modules would be a matter of simply adding/removing a package. However I'm not entirely convinced if this is what it is doing.. when compiling absolutely every package possible, FreeSWITCH will usually fail to compile, due to collision etc. So I have a couple of questions; 1) Why are the modules separated into individual files? 2) Are there any reasons to not be using pbuilder? I have also CC'd Travis Cross who appears to a major contributor on the Debian packaging code. Thanks Cal

7 16

Redial of the Call
by Subhash 12 Mar '13

12 Mar '13

Hi, I want to redial of the call when the hangup cause of the last bridge B leg of the call is failure or busy. How can i achieve this and what are the variables are needed to add in the dialplan.Please help me. Thanks, Subhash.

2 1

Background threads
by Steven Schoch 12 Mar '13

12 Mar '13

Using cidlookup causes an inconsistent pause before the main IVR starts, so would it make sense to run the cidlookup in the background? I was thinking about starting a script in the background using luarun, and having it set the cid_name before the caller is done with the IVR. The question is how to pass the variable to the main thread? Or am I looking for too much trouble here? -- Steve

4 7