June 2019 - FreeSWITCH-users - FreeSWITCH Mailing Lists

dynamic music on hold for mod_conference
by Lappe, Adam 19 Mar '20

19 Mar '20

Hi all, i am trying to dynamically set the mod-sound variable in mod_conference, so I can play different music on hold to my conference rooms without having to create multiple profiles. Is there a way to set my moh-sound path while I create the conference? Or can I change the moh-sound file via the event socket in a existing conference? I think this would also lead to success. Thanks in advance, Adam

5 6

New Debian FS vanilla install fails
by Sean Devoy 04 Mar '20

04 Mar '20

HI all, I have a new Debian 8.1 (32 bit) server for testing. I first did an apt-get install curl then per the instructions here: https://freeswitch.org/confluence/display/FREESWITCH/Debian+7 I did this: echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - apt-get update apt-get install freeswitch-meta-vanilla It runs for less than a minute and dies at: Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ... Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details. invoke-rc.d: initscript freeswitch, action "start" failed. dpkg: error processing package freeswitch-sysvinit (--configure): subprocess installed post-installation script returned error exit status 1 Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ... dpkg: dependency problems prevent configuration of freeswitch-init: freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however: Package freeswitch-sysvinit is not configured yet. dpkg: error processing package freeswitch-init (--configure): dependency problems - leaving unconfigured and ends shortly with: Errors were encountered while processing: freeswitch-sysvinit freeswitch-init E: Sub-process /usr/bin/dpkg returned an error code (1) I ran the cmds it says: systemctl status -l freeswitch.service * freeswitch.service - freeswitch Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled) Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1 Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. journalctl -xn -- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. -- Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1 Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. -- Subject: Unit freeswitch.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit freeswitch.service has failed. -- -- The result is failed. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. -- Subject: Unit freeswitch.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit freeswitch.service has failed. -- -- The result is failed. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500 Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session closed for user root Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n? What am I missing? Sean

5 7

Stumped by mod_portaudio permissions issue
by Mark Haun 02 Feb '20

02 Feb '20

I built freeswitch version 1.7.0+git~20150730T192909Z~ab7f83c654~32bit for my ARM-based home server (an NVIDIA Jetson board), with the intention of using mod_portaudio with a wireless USB headset for my main home phone. It works well when running freeswitch directly as root, but when I configured freeswitch to run at system startup, mod_portaudio could no longer find any audio devices. No problem, I thought, it's a simple permissions issue. I am using the example debian init script from the wiki (this is a Jessie install with SysV init rather than systemd). It runs freeswitch as user freeswitch, group daemon using the -u and -g command-line options. So I added "freeswitch" to the audio group, then used sudo to verify that I could play sound files with "aplay" as the freeswitch user. That worked, but it did not solve the mod_portaudio failure. Thinking there must be an issue with portaudio separate from ALSA, I fetched and built the "pa_devs" utility which enumerates and prints the available audio devices. (This is basically what mod_portaudio is doing on startup.) Running as the freeswitch user, that worked too. Hmmmm. I tried running freeswitch from the command line using sudo rather than the -u and -g options, i.e. $ sudo freeswitch /usr/local/freeswitch/bin/freeswitch -nc and that worked as well! Then I started experimenting with -u and -g and discovered that $ /usr/local/freeswitch/bin/freeswitch -nc -u freeswitch allows mod_portaudio to load correctly, whereas $ /usr/local/freeswitch/bin/freeswitch -nc -u freeswitch -g daemon causes mod_portaudio to fail. Can anyone explain what's happening here? In both cases the process UID, GID, EUID, EGID, FUID, and FGID are the same (freeswitch:daemon) as displayed with "ps xao pid,uid,gid,euid,egid,fuid,fgid". Could this be a bug in freeswitch? There are a couple of threads from 2-3 years ago in the archives, where mod_portaudio permissions issues were never resolved and the solution remained a mystery. For the time being I guess this (not using -g) is a workaround, but I'd sure like to understand what is going on. Mark

5 7

ICE/DTLS handshake
by Mirko Brankovic 25 Oct '19

25 Oct '19

HI, Has anyone experienced DTLS handshake takes 5s to get to SETUP state: > 2017-09-21 11:40:40.021178 [INFO] switch_rtp.c:3515 Changing audio DTLS > state from OFF to HANDSHAKE > 2017-09-21 11:40:45.319457 [INFO] switch_rtp.c:3172 Changing audio DTLS > state from HANDSHAKE to SETUP In network dump i see that answering side is not sending STUN for this 5s and then suddenly answers last 5 STUNs from A side. Has anyone encountered this kind of problem ? I have a pcap if necessary... Thanks, -- Regards, Mirko

3 7

Google MRCP sessions per FS node
by Dmitriy Borisov 03 Sep '19

03 Sep '19

Hi, All! Is there anyone, who using Google Speach API via unimrcp in production? How many simultaneous recognise sessions per node running with percetage of error less then 1%? -- With best regards Dmitry Borisov

2 1

Update DNS SRV records
by Paul Muaddib 26 Jul '19

26 Jul '19

Hi, how can I tell freeswitch to update the *SRV* records or is there a way to force the update without restarting. My provider keeps changing the entries after a few days and if I don't restart freeswitch I can not call out anymore (403) Best regards

9 14

Call to unregister endpoint with auth=true after endpoint password change
by Jose David Jurado Alonso 25 Jul '19

25 Jul '19

Hi, I have FS configured to only send calls to authenticated endpoints. It works very well in general but there is a case in which it sends the call to unregistered endpoints: 1. Auth the endpoint and "registration" (ok) 2. Call to endpoint and call arrives (ok) 3. Change the endpoint password in FS DB and endpoint "fail registration" 4. Call to endpoint and call arrives (ERROR, call must be ignored) The ERROR is because the REGISTER event know that endpoint "fail registration" and yet send the call anyway ignoring the "auth_calls=true" configuration. If I execute these fs_cli commands between step 3 and 4, the call is not sent (OK for me, expected and desired case): > sofia profile external flush_inbound_reg all > sofia profile external flush_inbound_reg reboot > sofia profile external check_sync I have not tested if all the commands are necessary or not. Does anyone know how it can be done to make it work as desired using configuration without having to execute the commands after every password change in an endpoint? Relevant configuration is: vars.xml:  <X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/> <X-PRE-PROCESS cmd="set" data="internal_sip_port=5060"/> <X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/> <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/>  <X-PRE-PROCESS cmd="set" data="external_auth_calls=true"/> <X-PRE-PROCESS cmd="set" data="external_sip_port=5080"/> <X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/> <X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/> sip_profile "external.xml" (i use it): <param name="manage-presence" value="false"/> <param name="auth-calls" value="true"/> <param name="multiple-registrations" value="true"/> I use a dynamic directory getting SIP accounts from DB and generate the XML (mod_curl) setting "cacheable=0". Thanks! José David Jurado Alonso.

4 4

Corrupted core.db
by Jai Rangi 23 Jul '19

23 Jul '19

We are getting this error When we do show registration switch_core_sqldb.c:1197 SQL ERR: [select * from registrations where hostname='freeswitch'] database disk image is malformed If there a way to fix this without restarting free-switch. Thank you -Jai

11 20

Mod_Python
by Caio Assis 19 Jul '19

19 Jul '19

Good afternoon. I use mod_python to execute scripts, and I notice that when there's a relative high call traffic, freeswitch's performance decreases significantly. And I also noticed that, the more interaction the script has with freeswitch's session object (getVariable, execute, etc) the more the performance decreases. I kept the interaction to the minimum, as in 1 session.execute('multiset'). Any sugestions?

2 1

Installing freeswitch on windows 10
by zoya Ferdowsian 27 Jun '19

27 Jun '19

Hello I am trying to install it on windows 10 I have followed https://freeswitch.org/confluence/display/FREESWITCH/Windows , In the document I see this warning --> On Windows you must Select *CheckOut as-is, Commit as-is* in order to Set core.autocrlf False. >From Git command prompt I run git clone https://stash.freeswitch.org/scm/fs/freeswitch.git C:/FS_GIT/ After completion I type --> *git config --get-all core.autocrlf* returns --> true Where am I supposed to do this to achieve false —> On Windows you must Select *CheckOut as-is, Commit as-is* i Thanks

3 2