New Debian FS vanilla install fails
HI all, I have a new Debian 8.1 (32 bit) server for testing. I first did an apt-get install curl then per the instructions here: https://freeswitch.org/confluence/display/FREESWITCH/Debian+7 I did this: echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - apt-get update apt-get install freeswitch-meta-vanilla It runs for less than a minute and dies at: Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ... Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details. invoke-rc.d: initscript freeswitch, action "start" failed. dpkg: error processing package freeswitch-sysvinit (--configure): subprocess installed post-installation script returned error exit status 1 Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ... dpkg: dependency problems prevent configuration of freeswitch-init: freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however: Package freeswitch-sysvinit is not configured yet. dpkg: error processing package freeswitch-init (--configure): dependency problems - leaving unconfigured and ends shortly with: Errors were encountered while processing: freeswitch-sysvinit freeswitch-init E: Sub-process /usr/bin/dpkg returned an error code (1) I ran the cmds it says: systemctl status -l freeswitch.service * freeswitch.service - freeswitch Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled) Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1 Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. journalctl -xn -- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. -- Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1 Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. -- Subject: Unit freeswitch.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit freeswitch.service has failed. -- -- The result is failed. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch. -- Subject: Unit freeswitch.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit freeswitch.service has failed. -- -- The result is failed. Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state. Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500 Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session closed for user root Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n? What am I missing? Sean
There is currently an issue being fixed where the libyuv.so was in the wrong package. Your install should complete successfully if you also install 'libyuv-dev'. Don't forget that you'll need to install some default configs: mkdir -p /etc/freeswitch/ cp -a /usr/share/freeswitch/conf/vanilla/* /etc/freeswitch/ William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com On 6/17/15 2:35 PM, Sean Devoy wrote:
HI all,
I have a new Debian 8.1 (32 bit) server for testing.
I first did an apt-get install curl then per the instructions here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+7
I did this:
echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add – apt-get update apt-get install freeswitch-meta-vanilla
It runs for less than a minute and dies at:
Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ...
Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript freeswitch, action "start" failed.
dpkg: error processing package freeswitch-sysvinit (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ...
dpkg: dependency problems prevent configuration of freeswitch-init:
freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however:
Package freeswitch-sysvinit is not configured yet.
dpkg: error processing package freeswitch-init (--configure):
dependency problems - leaving unconfigured
and ends shortly with:
Errors were encountered while processing:
freeswitch-sysvinit
freeswitch-init
E: Sub-process /usr/bin/dpkg returned an error code (1)
I ran the cmds it says:
systemctl status -l freeswitch.service
* freeswitch.service - freeswitch
Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled)
Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
journalctl -xn
-- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. --
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0)
Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session closed for user root
Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n?
What am I missing?
Sean
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks William. How do I install that? Sean -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William King Sent: Wednesday, June 17, 2015 5:44 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails There is currently an issue being fixed where the libyuv.so was in the wrong package. Your install should complete successfully if you also install 'libyuv-dev'. Don't forget that you'll need to install some default configs: mkdir -p /etc/freeswitch/ cp -a /usr/share/freeswitch/conf/vanilla/* /etc/freeswitch/ William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com On 6/17/15 2:35 PM, Sean Devoy wrote:
HI all,
I have a new Debian 8.1 (32 bit) server for testing.
I first did an apt-get install curl then per the instructions here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+7
I did this:
echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - apt-get update apt-get install freeswitch-meta-vanilla
It runs for less than a minute and dies at:
Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ...
Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript freeswitch, action "start" failed.
dpkg: error processing package freeswitch-sysvinit (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ...
dpkg: dependency problems prevent configuration of freeswitch-init:
freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however:
Package freeswitch-sysvinit is not configured yet.
dpkg: error processing package freeswitch-init (--configure):
dependency problems - leaving unconfigured
and ends shortly with:
Errors were encountered while processing:
freeswitch-sysvinit
freeswitch-init
E: Sub-process /usr/bin/dpkg returned an error code (1)
I ran the cmds it says:
systemctl status -l freeswitch.service
* freeswitch.service - freeswitch
Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled)
Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
journalctl -xn
-- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. --
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0)
Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session closed for user root
Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n?
What am I missing?
Sean
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I also tried a DEBIAN build from source. It too fails on libyuv-dev. I have googled and read for hours. I cannot find libyuv-dev to install it. Can someone please help me get a clean fresh install of the stable branch on a new Debian (7 or 8) server? Thanks, Sean -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Sean Devoy Sent: Wednesday, June 17, 2015 6:02 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails Thanks William. How do I install that? Sean -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William King Sent: Wednesday, June 17, 2015 5:44 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails There is currently an issue being fixed where the libyuv.so was in the wrong package. Your install should complete successfully if you also install 'libyuv-dev'. Don't forget that you'll need to install some default configs: mkdir -p /etc/freeswitch/ cp -a /usr/share/freeswitch/conf/vanilla/* /etc/freeswitch/ William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com On 6/17/15 2:35 PM, Sean Devoy wrote:
HI all,
I have a new Debian 8.1 (32 bit) server for testing.
I first did an apt-get install curl then per the instructions here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+7
I did this:
echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - apt-get update apt-get install freeswitch-meta-vanilla
It runs for less than a minute and dies at:
Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ...
Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript freeswitch, action "start" failed.
dpkg: error processing package freeswitch-sysvinit (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ...
dpkg: dependency problems prevent configuration of freeswitch-init:
freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however:
Package freeswitch-sysvinit is not configured yet.
dpkg: error processing package freeswitch-init (--configure):
dependency problems - leaving unconfigured
and ends shortly with:
Errors were encountered while processing:
freeswitch-sysvinit
freeswitch-init
E: Sub-process /usr/bin/dpkg returned an error code (1)
I ran the cmds it says:
systemctl status -l freeswitch.service
* freeswitch.service - freeswitch
Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled)
Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
journalctl -xn
-- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. --
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0)
Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session closed for user root
Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n?
What am I missing?
Sean
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
our current release branch is v1.4 , you are trying to build master On Wednesday, June 17, 2015, Sean Devoy <sdevoy@bizfocused.com> wrote:
I also tried a DEBIAN build from source. It too fails on libyuv-dev. I have googled and read for hours. I cannot find libyuv-dev to install it. Can someone please help me get a clean fresh install of the stable branch on a new Debian (7 or 8) server?
Thanks, Sean
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org <javascript:;> [mailto:freeswitch-users-bounces@lists.freeswitch.org <javascript:;>] On Behalf Of Sean Devoy Sent: Wednesday, June 17, 2015 6:02 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails
Thanks William.
How do I install that?
Sean
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org <javascript:;> [mailto:freeswitch-users-bounces@lists.freeswitch.org <javascript:;>] On Behalf Of William King Sent: Wednesday, June 17, 2015 5:44 PM To: freeswitch-users@lists.freeswitch.org <javascript:;> Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails
There is currently an issue being fixed where the libyuv.so was in the wrong package. Your install should complete successfully if you also install 'libyuv-dev'.
Don't forget that you'll need to install some default configs: mkdir -p /etc/freeswitch/ cp -a /usr/share/freeswitch/conf/vanilla/* /etc/freeswitch/
William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com <javascript:;>
On 6/17/15 2:35 PM, Sean Devoy wrote:
HI all,
I have a new Debian 8.1 (32 bit) server for testing.
I first did an apt-get install curl then per the instructions here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+7
I did this:
echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - apt-get update apt-get install freeswitch-meta-vanilla
It runs for less than a minute and dies at:
Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ...
Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript freeswitch, action "start" failed.
dpkg: error processing package freeswitch-sysvinit (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ...
dpkg: dependency problems prevent configuration of freeswitch-init:
freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however:
Package freeswitch-sysvinit is not configured yet.
dpkg: error processing package freeswitch-init (--configure):
dependency problems - leaving unconfigured
and ends shortly with:
Errors were encountered while processing:
freeswitch-sysvinit
freeswitch-init
E: Sub-process /usr/bin/dpkg returned an error code (1)
I ran the cmds it says:
systemctl status -l freeswitch.service
* freeswitch.service - freeswitch
Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled)
Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
journalctl -xn
-- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. --
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0)
Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session): session closed for user root
Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n?
What am I missing?
Sean
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:;> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:;> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:;> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:;> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
OK, thanks Michael. I thought the “Debian package” was 1.4. For the source install I misread the confluence line “If you want to compile and install the RELEASE branch, edit the above Makefile and add " -b v1.4 " just after the word "clone".” Hopefully I will have smooth sailing now. Sean From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Wednesday, June 17, 2015 11:16 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails our current release branch is v1.4 , you are trying to build master On Wednesday, June 17, 2015, Sean Devoy <sdevoy@bizfocused.com<mailto:sdevoy@bizfocused.com>> wrote: I also tried a DEBIAN build from source. It too fails on libyuv-dev. I have googled and read for hours. I cannot find libyuv-dev to install it. Can someone please help me get a clean fresh install of the stable branch on a new Debian (7 or 8) server? Thanks, Sean -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org<javascript:;> [mailto:freeswitch-users-bounces@lists.freeswitch.org<javascript:;>] On Behalf Of Sean Devoy Sent: Wednesday, June 17, 2015 6:02 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails Thanks William. How do I install that? Sean -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org<javascript:;> [mailto:freeswitch-users-bounces@lists.freeswitch.org<javascript:;>] On Behalf Of William King Sent: Wednesday, June 17, 2015 5:44 PM To: freeswitch-users@lists.freeswitch.org<javascript:;> Subject: Re: [Freeswitch-users] New Debian FS vanilla install fails There is currently an issue being fixed where the libyuv.so was in the wrong package. Your install should complete successfully if you also install 'libyuv-dev'. Don't forget that you'll need to install some default configs: mkdir -p /etc/freeswitch/ cp -a /usr/share/freeswitch/conf/vanilla/* /etc/freeswitch/ William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com<javascript:;> On 6/17/15 2:35 PM, Sean Devoy wrote:
HI all,
I have a new Debian 8.1 (32 bit) server for testing.
I first did an apt-get install curl then per the instructions here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+7
I did this:
echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - apt-get update apt-get install freeswitch-meta-vanilla
It runs for less than a minute and dies at:
Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ...
Job for freeswitch.service failed. See 'systemctl status freeswitch.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript freeswitch, action "start" failed.
dpkg: error processing package freeswitch-sysvinit (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ...
dpkg: dependency problems prevent configuration of freeswitch-init:
freeswitch-init depends on freeswitch-sysvinit (= 1.4.19~10~1-1~jessie+1); however:
Package freeswitch-sysvinit is not configured yet.
dpkg: error processing package freeswitch-init (--configure):
dependency problems - leaving unconfigured
and ends shortly with:
Errors were encountered while processing:
freeswitch-sysvinit
freeswitch-init
E: Sub-process /usr/bin/dpkg returned an error code (1)
I ran the cmds it says:
systemctl status -l freeswitch.service
* freeswitch.service - freeswitch
Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled)
Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15 EDT; 18min ago
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Failed to start freeswitch.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Unit freeswitch.service entered failed state.
journalctl -xn
-- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17 17:17:01 EDT. --
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: freeswitch.service: control process exited, code=exited status=1
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: freeswitch.service start request repeated too quickly, refusing to start.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Failed to start freeswitch.
-- Subject: Unit freeswitch.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freeswitch.service has failed.
--
-- The result is failed.
Jun 17 17:11:15 fstest.devoy.us<http://fstest.devoy.us> systemd[1]: Unit freeswitch.service entered failed state.
Jun 17 17:11:54 fstest.devoy.us<http://fstest.devoy.us> kernel: perf interrupt took too long (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
Jun 17 17:17:01 fstest.devoy.us<http://fstest.devoy.us> CRON[12430]: pam_unix(cron:session): session opened for user root by (uid=0)
Jun 17 17:17:01 fstest.devoy.us<http://fstest.devoy.us> CRON[12431]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 17 17:17:01 fstest.devoy.us<http://fstest.devoy.us> CRON[12430]: pam_unix(cron:session): session closed for user root
Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n?
What am I missing?
Sean
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<javascript:;> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<javascript:;> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<javascript:;> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<javascript:;> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<javascript:;> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi All, I'm trying to record video at a bridge with mod_vlc and I log in is such a mistake. What is it? How to treat? VLC: PulseAudio server connection failure: Connection refused -- S pozdravem, Ing.Denis Jakovlev mob.tel. 775-415-382
Hi Denis, Did you find a solution for that? I am getting the same issue with mod_vlc. On Thu, Jun 18, 2015 at 1:17 PM Denis Jakovlev <yadenis@seznam.cz> wrote:
Hi All,
I'm trying to record video at a bridge with mod_vlc and I log in is such a mistake. What is it? How to treat?
VLC: PulseAudio server connection failure: Connection refused
*-- S pozdravem, Ing.Denis Jakovlev mob.tel <http://mob.tel>. 775-415-382 * _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Bilal Abbasi
-
Denis Jakovlev
-
Michael Jerris
-
Sean Devoy
-
William King