November 2015 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Is there a way to update mod_event_socket with a new apply-inbound-acl list without restarting freeswitch?
by Steven Szeto 20 Nov '15

20 Nov '15

Hi, Suppose a freeswitch configuration has the following defined in event_socket.conf.xml: <configuration name="event_socket.conf" description="Socket Client"> <settings> <param name="nat-map" value="false"/> <param name="listen-ip" value="0.0.0.0"/> <param name="listen-port" value="8021"/> <param name="password" value="ClueCon"/>  <param name="apply-inbound-acl" value="localnet.auto"/> <list name="localnet.auto" default="allow"> <node type="allow" cidr="10.47.26.28/32"/> </list> </settings> </configuration> The above configuration will allow a remote PC with an IP address of 10.47.26.28 to issue commands to freeswitch (e.g. bgapi). Now, suppose we wanted to update the apply-inbound-acl list like this: <param name="apply-inbound-acl" value="localnet.auto"/> <list name="localnet.auto" default="allow"> <node type="allow" cidr="10.47.26.28/32"/> <node type="allow" cidr="10.47.26.44/32"/> </list> The list has been updated to allow a remote PC with an IP address of 10.47.26.44 to connect to freeswitch. The only way to get this to work is to restart freeswitch. We were wondering if there is another way that would not require a stop & start of freeswitch. The following has already been tried: - Moved the apply-inbound-acl to acl.conf.xml. Invoke the "reloadxml" and "reloadacl" commands Thanks, Steve ________________________________ NOTE: This e-mail (including any attachments) is for the sole use of the intended recipient(s) and may contain information that is confidential and/or protected by legal privilege. Any unauthorized review, use, copy, disclosure or distribution of this e-mail is strictly prohibited. If you are not the intended recipient, please notify Mitel immediately and destroy all copies of this e-mail. Mitel does not accept any liability for breach of security, error or virus that may result from the transmission of this message.

3 3

Play Credit before disconnecting call
by Voxbox.io 20 Nov '15

20 Nov '15

Hi Guys, I have some subscribers connected to my FS. I'm assigning each one of them some credit to place outbound calls and I'm using nibblebill to update balance accordly. I'm rather familiar with LUA, as I'm using a script to make my logic decision on who is calling, which is the remote gateway to use and the tariff to give to nibblebill before bridging the call, and so on. Now, I would like the user to let know the remaining balance at the end of each call playing a TTS message (of course only played when the remote party hang-up) Is this possible? How can I know from which side the call has been disconnected and only play TTS when is the remote party? Thank you so much, I can't find any clue in previous messages. Cheers Max

2 2

Jitterbuffer
by Josh Richesin 20 Nov '15

20 Nov '15

Hello, I am running FreeSwitch for our small Wireless ISP. Obviously, as a wireless ISP and ITSP, we have a lot of jitter and some packet loss. Have a few questions for this setup. 1) What is the best codec to use when there is going to be jitter and some packetloss? 2) The ATA's that we are using have adaptive jitter buffers, should I enable jitterbuffer on Freeswitch as well? If so, should it be via sofia profiles? The problem that I am trying to solve is this... Our voice customers on our freeswitch have a lot of issues with "calls breaking up" When they use another voice provider, like say vonage or something running off of a metaswitch, they do not have the same issues. Any help with this would be appreciated! Thanks in advance. Josh

6 9

mystery console message
by Russell Treleaven 20 Nov '15

20 Nov '15

I saw this on the freeswitch console months ago and did not get around to following up on it until now. A freeswitch profile is listening on :8080 a.b.c.d = remote address w.x.y.z = freeswitch address What is this? Is it a concern? recv 607 bytes from tcp/[a.b.c.d]:4423 at 17:50:50.225319: ------------------------------------------------------------------------ POST /login.action HTTP/1.1 User-Agent: Mozilla/5.0 Accept: */* Content-Type: application/x-www-form-urlencoded Host: w.x.y.z:8080 Content-Length: 395 Expect: 100-continue Connection: Keep-Alive redirect:${%23res%3d%23context.get('com.opensymphony.xwork2.dispatcher.HttpServletResponse'),%23res.setCharacterEncoding(%22UTF-8%22),%23req%3d%23context.get('com.opensymphony.xwork2.dispatcher.HttpServletRequest'),%23res.getWriter().print(%22dir:%22),%23res.getWriter().println(%23req.getSession().getServletContext().getRealPath(%22/%22)),%23res.getWriter().flush(),%23res.getWriter().close()}

4 4

Freeswitch server upgradation error
by Shisheer Teli 20 Nov '15

20 Nov '15

Dear Team As we know freeswitch 1.4 version is on end of ilfe. I am upgrading my freeswitch server by command "make current" from source but still it showing me 1.4 version. how to upgrade or i have to do fresh installation for freeswitch 1.6.

3 2

Make current crash
by Ximo Peral 20 Nov '15

20 Nov '15

Hi, I use FreeSWITCH Version 1.7.0+git~20151026T174548Z~6b5b1a3d86~64bit (git 6b5b1a3 2015-10-26 17:45:48Z 64bit). After doing a "make current" I received this output: ./make_modem_filter -m V.17 -r >v17_v32bis_rx_rrc.h/bin/sh: línea 1: 58782 Violación de segmento (`core' generado) ./make_modem_filter -m V.17 -r > v17_v32bis_rx_rrc.hmake[3]: *** [v17_v32bis_rx_rrc.h] Error 139make[3]: se sale del directorio `/usr/src/freeswitch/libs/spandsp/src'make[2]: *** [all] Error 2make[2]: se sale del directorio `/usr/src/freeswitch/libs/spandsp/src'make[1]: *** [all-recursive] Error 1make[1]: se sale del directorio `/usr/src/freeswitch/libs/spandsp'make: *** [spandsp-reconf] Error 2 The upgrading is on the fly. Could this be the problem? Thanks!

1 1

FS 1.6 (without video) and Ubuntu 14.04 Trusty
by Oleg Stolyar 19 Nov '15

19 Nov '15

Hi guys, I saw some discussion but did not see any resolution, so thought I'd ask. Has anyone been able to install FS 1.6 on Ubuntu Trusty (even without video)?

3 4

Question about JIRA stuck in "waiting for reporter" after reporter sent a comment
by Yehavi Bourvine 19 Nov '15

19 Nov '15

Hi, I have two issues reported in JIRA. In both of them I've been asked to provide more details which I've attached as a comment. However, both cases are still in "waiting for reporter" status. How do I change this, so the assingnee gets a notification? Or asking it otherwise: What did I do wrong when updating the information? Thanks, __Yehavi:

2 2

gateway real and proxy
by David Villasmil Govea 19 Nov '15

19 Nov '15

Hello guys, I want to register on a service with a specific realm and to an ip different than that coming from a dns query. i.e.: Let's say the realm i need to use is "voip.myrealm.com" and if you query a dns for that domain you get 1.2.3.4. The thing is i need to register on IP 4.3.2.1 so i did: <gateway name="1234"> <param name="username" value="1234"/> <param name="expire-seconds" value="300"/> <param name="realm" value="voip.myrealm.com"/> <param name="password" value="password"/> <param name="extension" value="auto_to_user"/> <param name="context" value="public"/> <param name="proxy" value="4.3.2.1"/> <param name="register" value="true"/> <param name="register-transport" value="tcp"/> </gateway> But i see registers going to 4.3.2.1 with realm 4.3.2.1 like: REGISTER sip:4.3.2.1;transport=tcp SIP/2.0. Via: SIP/2.0/TCP 10.0.160.3:5099;branch=z9hG4bKQ59Hpv51Z1yra. Max-Forwards: 70. From: <sip:1234@4.3.2.1>;tag=rymK6H2tBc45D. To: <sip:1234@4.3.2.1>. Call-ID: fd61bdec-8e1c-11e5-9d3d-5f90e70675ff. CSeq: 83598504 REGISTER. Contact: <sip:10.0.160.3:5099>. Expires: 0. User-Agent: FreeSWITCH-mod_sofia/1.5.15b+git~20150414T204943Z~5fada4bbb5~64bit. Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY. Supported: timer, path, replaces. Content-Length: 0. And the other way around just queries dns and registers on the returned ip... Is this at all possible? Thanks -- DVG -- Imagination is more important than knowledge Albert Einstein

2 3

Freeswitch HA config
by mojtaba karimi 19 Nov '15

19 Nov '15

DearI want to make two freeswitch system as Active/Standby scenario.i want to know how i must config my switch.conf.xml to update two databases i have PostgreSQL database installed and i have in both suystem freeswitch database that working fine. Bestmojtaba

1 0