November 2014 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Trying to originate a call using ES.
by Pavel 20 Nov '14

20 Nov '14

Hello Everybody! I'm stuck trying to originate a call using event socket. Somewhere on the internet I've found some Perl script involving ESL. So I changed it a bit so I get an incoming call to outbound socket, look for destination number and trying to set up outgoing call using originate like so: $con->sendRecv("api originate user/1000 &park()") This works. The question is how can I control a unanswered timeout of this originate, say to playback some message to initial caller after 5 seconds ? I've tried setting the following variables: originate_timeout=5 leg_timeout=5 call_timeout=5 like so: $con->sendRecv("api originate {originate_timeout=5}user/1000 &park()") None of this working. The originated call keeps ringing. Please advise. Thanks. Regards, Pavel.

3 3

Moving Voicemails
by Joel White 20 Nov '14

20 Nov '14

I initially configured my FreeSWITCH with an IP address, but now for scalability and high availability I am changing to a domain name. I successfully changed the system over, but was wondering how do I move the voicemails to the new domain folder under voicemail? The obvious answer is to move the files, I already did that and restarted the system. The existing voicemails and greetings are not visible to FreeSWITCH when I call voicemail. How do I transfer them over? Thank you in advance for any light you may shed on this predicament

5 10

Can't INVITE message to jitsi if length effective_caller_id_name >8
by Nguyễn Văn Nghĩa Em 20 Nov '14

20 Nov '14

Hello, I have one problem of make call to sip exension which registered on jitsi. In dialplan if I set effective_caller_id_name a string value which its length > 8, the sip endpoint which use jitsi can't receive the call. But if I register that extension to other phones devices (AudioCodes 310HD, CSipSimple), these endpoint will receive the call (i used sofia_contact to ring multiple sip endpoint simultaneously). If the length of effective_caller_id_name <=8, jitsi sip endpoint will receive the call. I have capture sip messages on computer which install jitsi, I find that there are no INVITE message. But when caller cancel the call, I saw CANCEL message on this pc. I don't know that is the problem? Please help me. My FS version is 1.4.6 which run on RedHat 6 64 bits OS Thanks. -- Best regards, ------------------------------------------------------------------------------------------------------------- EM NGUYEN Mobile: +84 949669075 Yahoo & Skype: nghiaembt Website: http://freeswitch.vn --------------------------------------------------------------------------------------------------------------

1 0

lua script to disconnect active outbound calls to a specific gateway
by Jason Holden 19 Nov '14

19 Nov '14

Is this possible?

3 5

ClueCon Weekly - Emil Ivov of Jitsi
by Ken Rice 19 Nov '14

19 Nov '14

Don¹t forget to join us at 1PM EST, 10AM PST, or 1800 GMT for ClueCon Weekly Today, Emil Ivov of Jitsi will be joining us. Find out what the jitsi guys have been working on! Join us at https://bbb.freeswitch.org/ and click the screen share button to see the screenshare/slides. (password is welcome) See you then! K -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH

1 0

debian build-all freezing at "Building sid-amd64 debs"
by Bruce Lefko 19 Nov '14

19 Nov '14

I am trying to tweak mod_spandsp in master and deb package the code for use in my application. I'm running "./debian/util.sh build-all -ibn -z9 -f /tmp/modules.conf" but it consistently gets stuck at "Building sid-amd64 debs.." First off, I'm not sure if this is the correct way to package custom changes, but also why is the debian build stuck at this step? Thanks!

4 14

feature idea for mod_callcenter
by Nathan Neulinger 18 Nov '14

18 Nov '14

Could be useful to have a "callcenter_config queue send [queue_name] [uuid] [agent]" that would explicitly send a call in the queue to a given agent, regardless of that agent's state. (Well, at least assuming they are capable of receiving a call.) The idea would be for when you have a "senior" agent that is in the system to take calls that are send to them from other agents or from a control panel, or as a 'agent handoff' to an agent that hasn't yet made themselves active in the queue. I can use just a plain transfer, but that requires jumping through extra hoops to change the state of the target agent - to make sure that they don't receive an actual queue call while in the middle of a transferred call that is no longer managed by mod_callcenter. -- Nathan ------------------------------------------------------------ Nathan Neulinger nneul(a)mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect

1 0

segfault on git from the 17th
by covici＠ccs.covici.com 18 Nov '14

18 Nov '14

Hi. I am getting segfaults when some calls are destroyed, but I can't reproduce it on demand. Should I file it anyway, even though I can't answer the question about latest git or how should I do this? The last few lines of the stack trace are: f348c00d020, obj=<optimized out>) at src/switch_core_session.c:1690 #26 0x00007f3495540204 in start_thread (arg=0x7f343c169700) at pthread_create.c:310 #27 0x00007f3494c4d90d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109 Thanks. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici(a)ccs.covici.com

3 4

freeswitch + openr2
by leon.ramos＠tiendaip.mx 18 Nov '14

18 Nov '14

Dear list: I am facing a problem when trying to compile freeswitch, freetdm + openr2. I followed the wiki on how to do it, I was able to use the old 1.2 openr2 version. A. If I use the version 1.2 from the svn trunk and the cmake command, I finished with this files: -- Up-to-date: /usr/lib64/libopenr2.so.3 -- Up-to-date: /usr/lib64/libopenr2.so -- Up-to-date: /usr/include/openr2.h -- Up-to-date: /usr/include/openr2/r2chan.h -- Up-to-date: /usr/include/openr2/r2context.h -- Up-to-date: /usr/include/openr2/r2proto.h -- Up-to-date: /usr/include/openr2/r2utils.h -- Up-to-date: /usr/include/openr2/r2log.h -- Up-to-date: /usr/include/openr2/r2exports.h -- Up-to-date: /usr/include/openr2/r2thread.h -- Up-to-date: /usr/include/openr2/r2declare.h -- Up-to-date: /usr/include/openr2/r2engine.h Freetdm configure script detects openr2 ok! B. If I don't use the cmake command in freetdm compilation, and I do a ./configure && make, I get fewer files installed. /usr/lib64/libopenr2.so.3 /usr/lib64/libopenr2.so /usr/include/openr2.h /usr/include/openr2/r2chan.h /usr/include/openr2/r2context.h /usr/include/openr2/r2proto.h /usr/include/openr2/r2utils.h /usr/include/openr2/r2log.h Freetdm configure script can not detect openr2 even it was installed properly! C. If I try a newer version of openr2, I am not able to find cmakelist.txt, Freetdm configure can not detect openr2 either. Is there anything I can do? I would like to make some freeswitch rpms, and I do not want to use cmake if it won't be supported in newer openr2 versions. Any help would be appreciated!

2 2

Re: [Freeswitch-users] fs_cli hangs
by akhil garg 18 Nov '14

18 Nov '14

running "fs_cli -d 7" gives the following output: [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request [DEBUG] esl.c:1465 esl_send() SEND auth ClueCon [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted [DEBUG] esl.c:1465 esl_send() SEND log Regards, Akhil

2 1